- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Main chip: ESP32-WROVER-B, SIM7000G
- Flash Memory:4M Flash / 8M PSRAM
- Interface: USB, SD Card, Solar Input interface
- Car Clock:40MHz
- Button: Reset, Power switch
- SIM Card Size: Nano SIM Card
- Antenna: SIM Antenna,GPS Antenna
- Operating Temperature Range:-40-85 degrees
Add to Wishlist
Add to Wishlist
- Main chip:ESP32 WROVER-B
- Interface: USB, SD Card, Solar Input interface
- Car Clock:40MHz
- Button: Reset, Power switch
- Antenna: SIM Antenna,GPS Antenna
- Operating Temperature Range:-40-85 degrees
Add to Wishlist
Add to Wishlist
- Very low power logging is supported
- Built-in MCP73831 single cell LiPo charger
- Current consumption
- ~20mA (Run)
- ~80µA (Sleep)
- ~18µA (Deep Sleep – regulator shut down)
- LEDs
- Power
- LiPo charge indicator
- Serial Tx and Rx
- Status
Add to Wishlist
Add to Wishlist
- Power amplifier chip NS4168
- I2S serial digital audio input interface
- Support a wide range of sampling rates: 8kHz~96kHz
- Automatic sampling rate detection, adaptive function
Add to Wishlist
Add to Wishlist
- Support type:16G FAT/FAT32 MicroSD
- Compatible with ATOM Matrix/ ATOM Lite
- Up to 16G TF card
- FAT/FAT32 format
Add to Wishlist
Add to Wishlist
- ESP32 Standard wireless functions WiFi, Bluetooth
- Internal 4M Flash
- Low Power Display
- 180-degree viewing angle
Add to Wishlist
Add to Wishlist
- Input Voltage:3-5.5 V
- Flash Memory:8 MB
- Powered by RP2040
- User controllable RGB LED
- USB-C connector for power, programming, and data transfer
Add to Wishlist
Add to Wishlist
- Input Voltage (V):3.3V@600mA
- Processor: Kinetis KL26 Arm® Cortex®-M0+ MCU
- Maximum Clock Frequency (MHz):48
- Flash Memory:128kB
- SRAM:16kB
- Dimension:95x38x10 mm
- Weight:21 gm
Add to Wishlist
Add to Wishlist
- Working voltage: 3.3V
- Input voltage: 3.3V~5V
- Support electric current of low power consumption: 10 μA
- Support maximum discharge current: 600mA
- Quick Response(the top frequency is 400KHz)
- Cost-effective
- Small size, convenient to install
Add to Wishlist
Add to Wishlist
- WiFi+Bluetooth 4.0 Dual-mode Module
- GDI Display Port, easy to connect
- Operating Voltage: 3.3V
- Input Voltage: 3.3V~5.5V
- Support Low-Power: 10uA
- ESP32 Dual-core low power main controller, 10uA power consumption
Add to Wishlist
Add to Wishlist
- Operating Current: 3.3V
- Operating Frequency: 433MHz
- Modulation Type: LoRaTM
- Output Power: ≤20dBm
- Receiving Sensitivity: -139dBm
Add to Wishlist
Add to Wishlist
- 24 I/O channels with input protection circuitry
- Adjustable target voltage: 1.2 V to 3.3 V
- Supported target interfaces (as of firmware v1.1): JTAG/IEEE 1149.1, UART/asynchronous serial
- USB interface for direct connection to the host computer
Add to Wishlist
Add to Wishlist
- nRF52840 ARM Cortex-M4F processor at 64 MHz
- 1 MB flash memory and 256 KB of SRAM
- Battery connector and charger for 3.7 V lithium polymer batteries
- SWD connector
Add to Wishlist
Add to Wishlist
- Onboard Mature and stable ESP-12F WiFi module, high capacity 4M Byte Flash
- The I/O port of the WiFi module and the UART program download port are all extracted, convenient secondary development
- Onboard AC-DC switch power module, supply power way support AC90-250V/DC7-12V/USB5V
- Onboard Wifi module RST reset button
- ESP-12F support use Eclipse/Arduino IDE etc.
Add to Wishlist
Add to Wishlist
- Dual Arm® powered
- Wi-Fi 5GHz and BLE5
- 512KB SRAM
- 4MB PSRAM
- Compatible with Arduino
- Industrial IoT
Add to Wishlist
Add to Wishlist
- ESP32-WROVER-B module
- Display 3.5 inch, LCD @320×480
- Power Supply DC 5V/2A. 5V/1A
- USB Type-C interface
Add to Wishlist
Add to Wishlist
Join our newsletter for 10% offs
Get our emails for info on new items, sales and much more.
Register now to get latest updates on promotions & coupons. Don’t worry, we not spam!
Product Categories
- (ESC) Drone Speed Controller
- (Step-Down) Buck Converter
- (Step-Up) Boost Converter
- 1 cell (3.7V~4.2V)
- 1 Cell LiPo (3.7V ~ 4.2V)
- 12 to 16 AWG
- 18 to 22 AWG
- 18650/26700 NMC Cells
- 2 Cell (7.4V~8.4V)
- 2 cell Lipo (7.4V ~ 8.4V)
- 24 to 30 AWG
- 2S Lipo (7.4V ~ 8.4V)
- 3 Cell (11.1V~12.6V)
- 3 cell Lipo (11.1V ~ 12.6V)
- 3 inch to 7 inch
- 32650 LiFePo4 Cell
- 3D Printer Display and Controller
- 3D Printer Extruder Kit
- 3D Printer Extruder Parts and Fans
- 3D Printer Filaments
- 3D Printer Heatbed and Accessories
- 3D Printer Nozzle
- 3D Printer Parts
- 3D Printers
- 3D Printing Pen
- 3S Lipo (11.1V ~ 12.6V)
- 4 Cell (14.8V~16.8V)
- 4 cell Lipo (14.8V ~ 16.8V)
- 4S Lipo (14.8V ~ 16.8V)
- 5 Cell (18.5V) & 6 cell (22.2V ~ 25.2V) Lipo
- 5 Cell (18.5V) & Above
- 6 to 10 AWG
- 6S LiPo (22.2V ~ 25.2V)
- 7-Segment
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
Product Categories
- Alphanumeric LCD
- Aluminium Heat Sink
- Aluminum Extrusion and Accessories
- Antenna
- Arducam Cameras and Accessories
- Arduino
- Arduino and AVR
- Arduino Based Fire Fighting Robot – Required Components & Parts
- Arduino based Smart Blind Stick – Required Components
- ARM Microcontroller
- Audio Amplifiers
- Audio and Displays
- Audio Connector
- Audio Connectors/Jack
- Audio ICs
- Audio Module
- Audio Module/ Amplifier
- Auto Safety & Security
- Automobile Connectors
- AVR Development Board
- Basic Components
- Basic Robot Parts
- Batteries
- Battery and adhesives
- Battery Chargers
- Battery Charging Boards
- Battery Connector
- Battery Connectors
- Battery Enclosures
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000