- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Model: Cpro X’3
- Item Name: 155mm Wheelbase 3 Inch (80mm) Duct Frame Kit
- Wheelbase: 155mm
- Structure: HX type split
- Material: 3K Carbon Fiber
- Bottom Plate Thickness: 3mm
- Upper Plate Thickness: 1.5mm
Add to Wishlist
Add to Wishlist
- Outer Diameter:38 mm
- Inner Diameter: 35 mm
- A 5-Degree up-tilt angle is applied
- This item suit for Auto Edition RC Quadcopter Hexacopter Multicopter
- Easy to use and 100% Brand New
- With Screws for Center plate installing usage.
- Weight: 146 gm
Add to Wishlist
Add to Wishlist
- Outer Diameter:44 mm
- Inner Diameter: 40 mm
- A 5-Degree up-tilt angle is applied
- This item suit for Auto Edition RC Quadcopter Hexacopter Multicopter
- Easy to use and 100% Brand New
- With Screws for Center plate installing usage.
- Weight: 204 gm
Add to Wishlist
Add to Wishlist
- Power input (V): DC 7.4-25.2 V
- BEC Output: 3A 5V.
- Suitable for Quadcopter Hexacopter Octocopter.
Add to Wishlist
Add to Wishlist
- Built-in 200mAh rechargeable lithium battery
- 5V USB charging port
- 14 Kinds of lighting mode
- Charging time:1 Hour
- Using time: 45 minutes(Marquee mode); 80 minutes(Flash mode)
- Material: ABS Plastic
Add to Wishlist
Add to Wishlist
- Input Voltage: 3.3V~5.5V
- Operating Current: 5mA (25mA in VOC Measurement)
- Communication Interface: I2C(Support 3.3V/5V) or SPI(other non-I2C ports only support 3.3V)
- Default I2C Address: 0x76
- Temperature Measurement Range: -40℃~+85℃
- Temperature Measurement Precision: ±1.0℃(0~65℃)
- Humidity Measurement Range: 0-100%r.H.
- Humidity Measurement Precision: ±3%r.H.(20-80% r.H.,25℃)
Add to Wishlist
Add to Wishlist
- Item name: Power distribution board
- Colour: Blue
- Power Supply: 2-6S
- Weight: 9.2g
Add to Wishlist
Add to Wishlist
- Working Voltage: 3.3V DC.
- Working Current: 35mA.
- Output Signal: I2C, UART.
- Working Temperature: -20~70℃.
- Size: 30mm x 20.5mm/1.18 x 0.81″
Add to Wishlist
Add to Wishlist
- 40PIN GPIO, Compatible with all the Raspberry Pi Boards.
- Onboard TSL25911FN digital ambient light sensor, for measuring IR and visible light
- Onboard BME280 sensor, for measuring temperature, humidity, and air pressure
- Onboard ICM20948 motion sensor, accelerometer, gyroscope, and magnetometer
- Onboard LTR390-UV-1 sensor, for measuring UV rays
- Onboard SGP40 sensor, for detecting ambient VOC
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Communication interface: I2C/SPI
- Dimension: 27mm x 20mm
- Mounting hole size: 2.0mm
Add to Wishlist
Add to Wishlist
- Gravity interface, no need to solder, plug and play
- Switchable I2C and UART, two output modes
- Highly integrated module can test a variety of data at the same time
- Reasonable layout and high precision
Add to Wishlist
Add to Wishlist
- Built from quality glass fiber and polyamide nylon.
- Integrated PCB connections for direct soldering of your ESCs
- Pre-threaded brass sleeves for all of the frame bolts.
- Colored arms for orientation to keep you flying in the right direction.
Add to Wishlist
Add to Wishlist
- PM, NOx, VOC, RH & T Sensor Platform
- Fast and Easy integration
- One Driver for up to 8 data signal
- Superior Sensing accuracy and lifetime
- Fully calibrated digital output
Add to Wishlist
Add to Wishlist
- Rated input voltage AC: 220~240V
- Input rated current <5mA
- Input voltage frequency 50/60Hz
- Ozone concentration <0.1mg/h
Add to Wishlist
Add to Wishlist
- Working Voltage: 5.0V DC
- Working Current: 140mA@5V(Peak 264mA@5V)
- Data Update: cycle 2s
- Output Method: RS485/UART
Add to Wishlist
Add to Wishlist
- Full 3K Carbon Fiber airframe
- Featuring 4mm removable arms
- Black Oxide steel screws
- Easy grip anodized spacers
- Multiple motor mounting holes to fit a variety of motors (M3 and M2 screw mounting patterns).
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000