- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
₹0.00
- Model: Cpro X’3
- Item Name: 155mm Wheelbase 3 Inch (80mm) Duct Frame Kit
- Wheelbase: 155mm
- Structure: HX type split
- Material: 3K Carbon Fiber
- Bottom Plate Thickness: 3mm
- Upper Plate Thickness: 1.5mm
- Outer Diameter:38 mm
- Inner Diameter: 35 mm
- A 5-Degree up-tilt angle is applied
- This item suit for Auto Edition RC Quadcopter Hexacopter Multicopter
- Easy to use and 100% Brand New
- With Screws for Center plate installing usage.
- Weight: 146 gm
- Outer Diameter:44 mm
- Inner Diameter: 40 mm
- A 5-Degree up-tilt angle is applied
- This item suit for Auto Edition RC Quadcopter Hexacopter Multicopter
- Easy to use and 100% Brand New
- With Screws for Center plate installing usage.
- Weight: 204 gm
- Input Voltage:7-24V
- Interface Serial
- Compatibility MKR size
- Transceiver MAXIM MAX3157
- Buck converter Texas Instruments TPS54232
- Switchable onboard termination resistor
- Power input (V): DC 7.4-25.2 V
- BEC Output: 3A 5V.
- Suitable for Quadcopter Hexacopter Octocopter.
- Built-in 200mAh rechargeable lithium battery
- 5V USB charging port
- 14 Kinds of lighting mode
- Charging time:1 Hour
- Using time: 45 minutes(Marquee mode); 80 minutes(Flash mode)
- Material: ABS Plastic
- Item name: Power distribution board
- Colour: Blue
- Power Supply: 2-6S
- Weight: 9.2g
- Built from quality glass fiber and polyamide nylon.
- Integrated PCB connections for direct soldering of your ESCs
- Pre-threaded brass sleeves for all of the frame bolts.
- Colored arms for orientation to keep you flying in the right direction.
The MKR CAN Shield is based on the MCP2515 CAN controller and the TJA1049 CAN transceiver. Mounting this shield on a MKR family board allows you to connect to existing CAN systems. It also features the TPS54232 buck converter from Texas Instruments.
Want to connect several Seeed Studio Grove modules to your Arduino board? The Arduino MKR CONNECTOR CARRIER is the perfect companion for Arduino MKR boards and a Grove ecosystem.
These sensors are of the latest generation and measure:
- Atmospheric pressure
- Temperature and humidity
- Light intensity (in LUX, max 650)
To help you build projects and store the data collected locally, this shield has a slot for a microSD card
The MKR GPS Shield is based on the u-blox SAM-M8Q GNSS (Global Navigation Satellite System) module. It can be used to add GPS to any of your MKR boards. To use this shield, you can refer to the documentation of the MKR GPS library.
Are you developing a complex IoT device with your MKR board and running out of memory? Add Flash memory and microSD storage to your MKR board, and allow over-the-air updates, with the Arduino MKR MEM Shield.
The MKR Therm Shield is a great addon for MKR family boards, and allows you to connect high-quality thermocouples, and can calculate temperatures from -200°C to +700°C. An ideal solution to use for ovens, freezers, smokers, and similar environments.
- Full 3K Carbon Fiber airframe
- Featuring 4mm removable arms
- Black Oxide steel screws
- Easy grip anodized spacers
- Multiple motor mounting holes to fit a variety of motors (M3 and M2 screw mounting patterns).
- Model: HF150
- Product: DIY drone frame Kit
- Wheelbase: 150mm
- Paddle: 3 inch paddle
- Flight control hole distance: 20x20mm
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000