- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Operating Voltage 2.7V to 5.5V
- Operating Temperature 0℃ to +70℃
- Accuracy ±2ppm from 0°C to +40°C
- Interface I2C
- I2C Address 0x64
Add to Wishlist
Add to Wishlist
- Input Voltage: 3.3V~5.5V
- Operating Current: 5mA (25mA in VOC Measurement)
- Communication Interface: I2C(Support 3.3V/5V) or SPI(other non-I2C ports only support 3.3V)
- Default I2C Address: 0x76
- Temperature Measurement Range: -40℃~+85℃
- Temperature Measurement Precision: ±1.0℃(0~65℃)
- Humidity Measurement Range: 0-100%r.H.
- Humidity Measurement Precision: ±3%r.H.(20-80% r.H.,25℃)
Add to Wishlist
Add to Wishlist
- Working voltage: 3V-5V (MAN SV)
- Static output voltage: VCCi2
- Working current: 135m2A (MAX)
- Small in size, with easy mounting capability.
- Monolithic Hall IC for high reliability
Add to Wishlist
Add to Wishlist
- Sensor Output: Voltage
- Supply Voltage DC Min: 6V
- Supply Voltage DC Max: 12V
- Current Measuring Range DC: -125A to 125A
- Current Measuring Range AC: -125A to 125A
- Response Time: 3µsProduct
Add to Wishlist
Add to Wishlist
- Galvanic isolation between primary and secondary circuit
- +5V Single power supply
- Ratiometric offset
- Fixation by M3 nuts and screws
- Small size and space-saving
Add to Wishlist
Add to Wishlist
- Working Voltage: 3.3V DC.
- Working Current: 35mA.
- Output Signal: I2C, UART.
- Working Temperature: -20~70℃.
- Size: 30mm x 20.5mm/1.18 x 0.81″
Add to Wishlist
Add to Wishlist
- Power: 2.3V ~ 5.3V
- Dimension: 27.0mm * 15.5mm
- Mounting holes size: 2.0mm
- Color: Blue
Add to Wishlist
Add to Wishlist
- 40PIN GPIO, Compatible with all the Raspberry Pi Boards.
- Onboard TSL25911FN digital ambient light sensor, for measuring IR and visible light
- Onboard BME280 sensor, for measuring temperature, humidity, and air pressure
- Onboard ICM20948 motion sensor, accelerometer, gyroscope, and magnetometer
- Onboard LTR390-UV-1 sensor, for measuring UV rays
- Onboard SGP40 sensor, for detecting ambient VOC
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Communication interface: I2C/SPI
- Dimension: 27mm x 20mm
- Mounting hole size: 2.0mm
Add to Wishlist
Add to Wishlist
- Gravity interface, no need to solder, plug and play
- Switchable I2C and UART, two output modes
- Highly integrated module can test a variety of data at the same time
- Reasonable layout and high precision
Add to Wishlist
Add to Wishlist
- PM, NOx, VOC, RH & T Sensor Platform
- Fast and Easy integration
- One Driver for up to 8 data signal
- Superior Sensing accuracy and lifetime
- Fully calibrated digital output
Add to Wishlist
Add to Wishlist
- Rated input voltage AC: 220~240V
- Input rated current <5mA
- Input voltage frequency 50/60Hz
- Ozone concentration <0.1mg/h
Add to Wishlist
Add to Wishlist
- Working Voltage: 5.0V DC
- Working Current: 140mA@5V(Peak 264mA@5V)
- Data Update: cycle 2s
- Output Method: RS485/UART
Add to Wishlist
Add to Wishlist
- Type: Hall Current Sensor Module
- Interface Analog, I2C
- Compatibility mikroBUS
- Click board size: 57.15 x 25.4 mm
- Input Voltage 3.3V or 5V
Add to Wishlist
Add to Wishlist
- Product: SS41 Hall Effect Sensor, Position, Digital, Bipolar, SS40 Series
- Supply voltage (V): 4-24
- Supply current (OUTPUT ON): 10.0
- Output current (A): 20
- Output leakage current (A):10.0
- Rise time (10% to 90%): 1.5
Add to Wishlist
Add to Wishlist
- Brand: DFRobot
- Product: Intelligent Rain Detection Module
- Serial Communication Rate: 115200 bps
- Voltage: 3.3V
- Operating Current: <50mA
- Temperature Range: -40℃~85℃
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000