- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- ATmega328P MCU with Optiboot (UNO) bootloader
- Built-in resettable PTC fuse 5V/2A
- CH340G Serial-to-USB converter
Add to Wishlist
Add to Wishlist
- Core Processor: AVR
- Type: Development
- Interconnect System: Trinket
- Mounting Type: Fixed
- Suggested Programming Environment: Arduino
- Type:MCU 8-Bit
- Utilized IC / Part:ATtiny85
Add to Wishlist
Add to Wishlist
- Kit Name: Feather 32u4 Bluefruit LE
- Technology: MCU
- Processor: ATmega32u4
- Compatible:3.7 lipo battery
Add to Wishlist
Add to Wishlist
- ATSAMD51 32-bit Cortex M4 core
- 512 KB flash, 192 KB RAM
- 3.3V regulator with 500mA peak current regulator
- USB bootloader and serial port debugging
- Built-in 100mA lipoly charger with charging status indicator LED
Add to Wishlist
Add to Wishlist
- RP2040 SoCARM Cortex M0+ running at up to 133Mhz
- SRAM264kB
- Flash Storage8MB of QSPI
- USB PortMicro USB
Add to Wishlist
Add to Wishlist
- RP2040 32-bit Cortex M0+ dual-core running at ~125 MHz
- 8 MB SPI FLASH
- Built-in 200mA+ lipo charger
- On-board STEMMA QT / Qwiic connector
- 3.3V regulator with 500mA peak current output
- USB Type C connector
- 264kB on-chip SRAM
- 21 x Multifunction GPIO
- 3.3V regulator with 500mA peak current output
Add to Wishlist
Add to Wishlist
- ATSAME51 32-bit Cortex M4 core with 120 MH
- 32-bit, 3.3 V logic and power
- 512 KB Flash, 192 KB RAM
- 2 MB SPI FLASH chip
- 3.3V regulator with 500mA peak current output
- USB Type-C
Add to Wishlist
Add to Wishlist
- INA219B chip
- 3.3Vvoltage regulation
- +26VDC peak current
Add to Wishlist
Add to Wishlist
- Board Type:Evaluation Platform
- Contents:Board(s)
- Core Processor:ARM® Cortex®-M0
- Mounting Type:Fixed
- Platform:Arduino
- Type:MPU
- Utilized IC / Part:ATSAMD21E18
Add to Wishlist
Add to Wishlist
- Output: Continuous 40A, Burst 60A up to 10 Secs.
- Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.
- BEC: 3A / 5V (Switch mode).
- Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: Brushless Motor)
Add to Wishlist
Add to Wishlist
- Output: Continuous 60A, Burst 80A up to 10 Secs.
- Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.
- BEC: Pentium-60A: 3A / 5V (Switch mode).
- Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: Brushless Motor)
Add to Wishlist
Add to Wishlist
- Support High Voltage (HV) Receivers
- Input voltage: 3.7V-27V
- Max current: 30A
- 18AWG silicone cable
- JST Plug
- Cable length 20cm
- Weight: 11g – With LED indicator lamp
Add to Wishlist
Add to Wishlist
- Continuous Current: 40A
- Burst Current: 55A (10 Sec.)
- BEC Mode: Linear Mode, 5V@3A
- Programmable: Yes
- Battery cell : Li-PO / NiMH
Add to Wishlist
Add to Wishlist
1 Output: Continuous 80A, Burst 100A up to 10 seconds.
2 Input Voltage: 2-6S Lipo, 5-18 cells NiMH.
3 BEC: 5A / 5V Switch mode BEC.
4 Refresh rate of the throttle signal: 50Hz to 432Hz.
5 Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.
(BLM = BrushLess Motor)
Add to Wishlist
Add to Wishlist
- Output: Continuous 50A
- Burst 65A up to 10 seconds.
- Input Voltage: 2-4S Lipo, 5-12 cells N
- BEC: 5A / 5V Switch mode BEC.
- The refresh the rate of the throttle signal: 50Hz to 432
Add to Wishlist
Add to Wishlist
- Output: Continuous 20A.
- Burst 25A up to 10 seconds.
- Input Voltage: 2-3S Lipo, 5-9 cells NiMH.
- BEC: 2A / 5V Linear mode BEC.
- Refresh rate of the throttle signal: 50Hz to 432Hz.
- Size: 42mm x 25mm x 8mm.
- Weight: 19g.
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000