- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Supports 3-6S Lipo input
- 35A continuous current, 50A burst
- MCU: STM32F745 32-bit processor
- IMU: ICM20689 (SPI)
- Barometer: BMP280
- Current Sensor: Approximately 130 amps maximum measurable value
- Supports Betaflight, Butterflight, and Cleanflight.
Add to Wishlist
Add to Wishlist
- Power Supply: 3.3V~5.5 V
- Communication: I2C, UART
- Wireless Mode: IEEE802.11b/g/n
- Encryption Type: WPA WPA2/WPA2–PSK
- WiFi Frequency: 2.4GHz
Add to Wishlist
Add to Wishlist
Voltage: 1~2s LiPoly (3.2~8.4V)
RF: Supports DSM/DSM2/DSMX
Software: Naze32 BRUSH
Size: 32.5 x 22 x 1.2mm
Weight: 3g
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
- Power Supply:5-80 V
- Switching Voltage (VAC):250@10A
- Switching Voltage (VDC):30@10A
Add to Wishlist
Add to Wishlist
- LoRa Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change
- High sensitivity: down to -148dBm
- Half-duplex SPI communication
- Programmable bit rates up to 300kbps
- Supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes
Add to Wishlist
Add to Wishlist
- Material: super soft silicone.
- Color Function JST-SH Pin Servo connector plug.
- Total Cable length: 15cm
Add to Wishlist
Add to Wishlist
- The volume of about 50 dB.
- Interface: 1.25-2P plug.
- Connector: DF13 Plug
- Wire length: 190mm
- Size: Dia 30mm
Add to Wishlist
Add to Wishlist
- 32bit STM32F427 Cortex M4 core with FPU
- 168MHz
- 256KB RAM
- 2 MB Flash
Add to Wishlist
Add to Wishlist
- MCU: 100MHz STM32F411CEU6
- IMU: MPU6000 (SPI)
- Continuous current: 3.5 Amps
- Input voltage range: 6~30V
- Compatible lipo: (2~6S LiPo)
Add to Wishlist
Add to Wishlist
- MCU: STM32F405RGT6 32-bit processor
- IMU: ICM20689 (SPI)
- USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
- 3 hardware UARTS (UART1,3,6)
- 128 Mbit Dataflash chip for Blackbox logging
- 5v Power Out: 1.5 A max
- 3.3v Power Out: 200 mA max
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V
- Modulation: LoRa/(G)FSK
- Emit power: > 14dBm@3.3V
- RF chip: SX1262
Add to Wishlist
Add to Wishlist
- Item name: F4 V3 PLUS Flight Controller
- Firmware: Omnibus ~ f4
- Board Dimensions: 36x36mm
- Montagegaten: 30.5×30.5mm
- STM32 F405 MCU
- Dshot protocol
Add to Wishlist
Add to Wishlist
- Model: ESP32-CAM-MB
- Color: Black
- Chipset: CH340G
- Connectivity Technology: USB
Add to Wishlist
Add to Wishlist
- Mini wi-fi device.
- Operating voltage: 5V.
- Serial Wi-Fi Adapter Module.
- Dimensions : 6x5x1.
- Color: Blue
Add to Wishlist
Add to Wishlist
- Based on ESP32 240MHz Xtensa dual-core 32-bit microprocessor
- Operating Voltage: 2.7V – 4.2V
- Working Current: 60mA
- Battery Charging Current: 500mA
- On-board 0.96inch 160×80 pixels 65K color IPS LCD display
- On-board single 3.7V lithium battery charge/discharge header, suitable for mobile IoT product design
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000