DFRobot Gravity WiFi IoT Module
₹1,549.00
- Power Supply: 3.3V~5.5 V
- Communication: I2C, UART
- Wireless Mode: IEEE802.11b/g/n
- Encryption Type: WPA WPA2/WPA2–PSK
- WiFi Frequency: 2.4GHz
Did you like this product? Add to favorites now and follow the product.
Description
This WiFi IoT module would be an excellent choice for IoT classroom teaching and smart home projects. It supports multiple programming platforms, such as MakeCode, Mind+, and Arduino IDE, and can also be used on various popular IoT platforms like Easy IoT, IFFTTT, ThingSpeak, SIoT. Besides that, the module is designed with an easy-to-use Gravity interface and employs UART and I2C communication protocols. You can use it to build IoT projects with other mainboards like the micro: bit, Arduino, STM32, etc.
Features:
- Support Arduino IDE programming, MakeCode, and Mind+ Graphical Programming
- I2C and UART Communication
- Support Main controller Arduino, micro: bit, etc.
- Support protocols like MQTT, HTTP, etc. Work well with IoT platforms EasyIoT, IFTTT, ThingSpeak, etc.
- PH2.0-4P Gravity Interface
Useful Links:
Package Includes:
1 x Gravity: WIFI IoT Module
Additional information
Input Voltage (V) | 3.3 to 5.5 |
---|---|
Communication Interface | I2C, UART |
Bluetooth Version | IEEE802.11b/g/n |
Frequency(GHz) | 2.4 |
Length (mm) | 37 |
Width (mm) | 32 |
Quick Comparison
Settings | DFRobot Gravity WiFi IoT Module remove | ESP WROOM 32 MCU Module WITHOUT BLE remove | Espressif ESP32-WROVER-IPEX 16M 128Mbit Flash WiFi Bluetooth Module remove | SX1278 LoRa Series Ra-02, Spread Spectrum Wireless, Module remove | ESP32-CAM-MB MICRO USB Download Module for ESP32 CAM Development Board remove | Espressif ESP32-WROVER 4M 32Mbit Flash WiFi Bluetooth Module remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | DFRobot Gravity WiFi IoT Module remove | ESP WROOM 32 MCU Module WITHOUT BLE remove | Espressif ESP32-WROVER-IPEX 16M 128Mbit Flash WiFi Bluetooth Module remove | SX1278 LoRa Series Ra-02, Spread Spectrum Wireless, Module remove | ESP32-CAM-MB MICRO USB Download Module for ESP32 CAM Development Board remove | Espressif ESP32-WROVER 4M 32Mbit Flash WiFi Bluetooth Module remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Image | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SKU | 1073441 | 1422329 | 975763 | 1121428 | 1150750 | 975755 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Rating | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Price | ₹1,549.00 | ₹465.00 | ₹489.00 | ₹385.00 | ₹98.00 | ₹306.00 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Stock | In Stock
| In Stock
| Out of stock
| In Stock
| Out of stock
| In Stock
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Availability | In Stock | In Stock | Out of stock | In Stock | Out of stock | In Stock | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Add to cart | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Description |
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Content | This WiFi IoT module would be an excellent choice for IoT classroom teaching and smart home projects. It supports multiple programming platforms, such as MakeCode, Mind+, and Arduino IDE, and can also be used on various popular IoT platforms like Easy IoT, IFFTTT, ThingSpeak, SIoT. Besides that, the module is designed with an easy-to-use Gravity interface and employs UART and I2C communication protocols. You can use it to build IoT projects with other mainboards like the micro: bit, Arduino, STM32, etc. Features:
Useful Links:Package Includes:1 x Gravity: WIFI IoT Module | ESP32 Development board is based on the ESP WROOM32 WIFI Module.It’s a low-footprint, minimal system development board powered by the latest ESP-WROOM-32 module and can be easily inserted into a solderless breadboard. It contains the entire basic support circuitry for the ESP-WROOM-32, including the USB-UART bridge, reset- and boot-mode buttons, LDO regulator and a micro-USB connector. Every important GPIO is available to the developer. Applications:
Features:
Specifications:
Packages Includes:1 x ESP WROOM 32 MCU Module WITHOUT BLE | Espressif ESP32-WROVER-IPEX Wireless Module is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications. These applications range from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding. ESP32-WROVER-IPEX features a 16MB external SPI flash and an additional 128MB SPI Pseudo static RAM (PSRAM). The ESP32-WROVER-IPEX MCU Modules use the ESP32-D0WD chip at its core. This SoC features two CPU cores that can be individually controlled, and the CPU clock frequency is adjustable from 80MHz to 240MHz. The ESP32 integrates a rich set of peripherals, ranging from capacitive touch sensors, Hall sensors, SD card interface, Ethernet, high-speed SPI, UART, I2S, and I2C. ESP-32S Wifi Bluetooth combo module provides SDK Firmware for fast on-line programming and open source toolchains based on GCC for development support. It is designed for Generic low power IoT sensor hub, loggers, video streaming for the camera, Wi-Fi & Bluetooth enabled devices, Home automation, and mesh network applications, aimed at makers, hardware engineers, software engineers and solution provides. ESP32 is a single chip 2.4 GHz Wi-Fi and Bluetooth combo chip designed with TSMC ultra-low-power 40 nm technology. It is designed and optimized for the best power performance, RF performance, robustness, versatility, features, and reliability, for a wide variety of applications, and different power profiles. ESP32 is the most integrated solution for Wi-Fi + Bluetooth applications in the industry with less than 10 external components. ESP32 integrates the antenna switch, RF balun, power amplifier, low noise receive amplifier, filters, and power management modules. As such, the entire solution occupies a minimal Printed Circuit Board (PCB) area. ESP32 is designed for mobile, wearable electronics, and the Internet of Things (IoT) applications. It has many features of state-of-the-art low power chips, including fine resolution clock gating, power modes, and dynamic power scaling. Features:
Specifications:
Package Includes:1 x Espressif ESP32-WROVER-IPEX 16M 128Mbit Flash WiFi Bluetooth Module | This SX1278 LoRa Series Ra-02 Spread Spectrum Wireless Module is a wireless transmission module based on SEMTECH’s SX1278 wireless transceiver. It adopts advanced LoRa spread spectrum technology, with a communication distance of 10,000 meters. It has a strong ability of anti-jamming and has the function of air wake-up Consumption. Can be covering thousands of people in the district environment, particularly suitable for meter reading, smart home, burglar alarm equipment. The LoRa series module Ra-01 is designed and developed by Flawless Technology. The SX1278 RF module is mainly used for long-range spread spectrum communication. It can resist Minimize current consumption. Thanks to SEMTECH’s patented LoRa modulation technology, the SX1278 has a high sensitivity of -148 dBm with a power output of +20 dBm, a long transmission distance and high reliability. At the same time, compared with the traditional modulation technology, LoRa modulation technology has obvious advantages in anti-blocking and selection, which solves the problem that the traditional design scheme cannot consider the distance, interference and power consumption at the same time. Features :
Package Includes :1 x SX1278 LoRa Series Ra-02 Module | The ESP32-CAM AI-Thinker MB programmer Shield is a shield that you attach to your ESP32-CAM board GPIOs.The programmer comes with the CH340C USB to serial chip. This allows you to program the ESP32-CAM using the USB port on the shield. The shield also comes with a RESET button. This may be useful to easily reset the ESP32-CAM or put it into flashing mode. Note: The camera module is not included with the board. Features:
Features
Specifications:
Package Includes:1 x ESP32-CAM-MB MICRO USB Download Module for ESP32 CAM Development Board | Espressif ESP32-WROVER Wireless Module is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications. These applications range from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding. ESP32-WROVER features a 4MB external SPI flash and an additional 32MB SPI Pseudo static RAM (PSRAM). The ESP32-WROVER MCU Modules use the ESP32-D0WD chip at its core. This SoC features two CPU cores that can be individually controlled, and the CPU clock frequency is adjustable from 80MHz to 240MHz. The ESP32 integrates a rich set of peripherals, ranging from capacitive touch sensors, Hall sensors, SD card interface, Ethernet, high-speed SPI, UART, I2S, and I2C. ESP-32S Wifi Bluetooth combo module provides SDK Firmware for fast online programming and open source toolchains based on GCC for development support. It is designed for Generic low power IoT sensor hub, loggers, video streaming for the camera, Wi-Fi & Bluetooth enabled devices, Home automation, and mesh network applications, aimed at makers, hardware engineers, software engineers and solution provides. ESP32 is a single chip 2.4 GHz Wi-Fi and Bluetooth combo chip designed with TSMC ultra-low-power 40 nm technology. It is designed and optimized for the best power performance, RF performance, robustness, versatility, features, and reliability, for a wide variety of applications, and different power profiles. ESP32 is the most integrated solution for Wi-Fi + Bluetooth applications in the industry with less than 10 external components. ESP32 integrates the antenna switch, RF balun, power amplifier, low noise receive amplifier, filters, and power management modules. As such, the entire solution occupies a minimal Printed Circuit Board (PCB) area. ESP32 is designed for mobile, wearable electronics, and the Internet of Things (IoT) applications. It has many features of state-of-the-art low power chips, including fine resolution clock gating, power modes, and dynamic power scaling. Features:
Package Includes:1 x Espressif ESP32-WROVER 4M 32Mbit Flash WiFi Bluetooth Module | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Weight | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Additional information |
|
|
|
