- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Input Voltage (V): 7 ~ 24
- Max. Continuous Current: 1A
- Peak Motor Current: 2A@10s
- PWM Frequency: 20Khz
- On-Board DC motor Driver L298N.
- 5 mm standard DC plug-in jack for Input supply
Add to Wishlist
Add to Wishlist
- Operating Voltage: 6-30 VDC
- Operating Current: up to 8A
- Material: ABS
- Frequency:16 Khz
- Dimension:80x40x25 mm
Add to Wishlist
Add to Wishlist
- Processor: ARM Cortex-M4 CPU 5.0 Stack
- Input Voltage:3.3V@500mA
- Connector Type:2 pole JST-Ph
- Interface: I2C
- Weight:3 gm
Add to Wishlist
Add to Wishlist
- ATmega328@16MHz
- Bluetooth Low Energy (BT 4.0)
- Micro USB port
- Super Compact Size
- Support Bluetooth HID and ibeacon
Add to Wishlist
Add to Wishlist
- Power Supply: 3.3V~5.5 V
- Communication: I2C, UART
- Wireless Mode: IEEE802.11b/g/n
- Encryption Type: WPA WPA2/WPA2–PSK
- WiFi Frequency: 2.4GHz
Add to Wishlist
Add to Wishlist
- 2.4 GHz Transmit and Receive.
- Transmit power and receive sensitivity comparable to a Class 1 Bluetooth device.
- Standard Cortex Debug Connector (10-pin 50-mil JTAG)
- In-System Programming (ISP) Serial Connector
- Expansion connector intended for inter-Ubertooth communication or other future uses.
- Six Indicator LEDs
Add to Wishlist
Add to Wishlist
- Nominal Voltage:6~30 V
- continuous Current:50A
- peak Current: 100A
Add to Wishlist
Add to Wishlist
- Power Supply:5-80 V
- Switching Voltage (VAC):250@10A
- Switching Voltage (VDC):30@10A
Add to Wishlist
Add to Wishlist
- LoRa Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change
- High sensitivity: down to -148dBm
- Half-duplex SPI communication
- Programmable bit rates up to 300kbps
- Supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes
Add to Wishlist
Add to Wishlist
BLE chip: TICC2540
Working channel: 2.4G
Interface: Micro-USB
Input voltage: Micro-USB power supply, Vin6~12V, 5V
Microprocessor: ATmega328P-MU QFN32
Bootloader: Latest arduino1.8.8
Pin: two rows 2.54mm-15Pin
Add to Wishlist
Add to Wishlist
- Microcontroller: ATmega328P
- Nrf24L01+ 2.4G wireless
- Architecture AVR
- Operating Voltage 5 V
- Flash Memory 32 KB of which 2 KB used by bootloader
- SRAM: 2 KB
- Clock Speed: 16 MHz
- Analog I/O: 8 Pins
- EEPROM 1 KB
- DC Current per I/O Pins: 40 mA (I/O Pins)
- Input Voltage: 7-12 V
- Digital I/O: 22 Pins
- PWM Output: 6
- Power Consumption: 19 m
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
- BT Version Bluetooth Specification V4.0 BLE
- Supply Power 3.3v – 5v
- Working frequency 2.4GHz ISM band
- Modulation method GFSK(Gaussian Frequency Shift Keying)
- Speed Asynchronous: 6K Bytes, Synchronous: 6K Bytes
- Size 40cm x 20cm
Add to Wishlist
Add to Wishlist
- Working Frequency: 2.4G
- Communication Interface: UA pin 3.3V TTL level
- Input Voltage: 3.2 ~ 6V
- Operating Voltage: 3.0 ~ 3.6V
- Communication Level: 3.3V
- Transmitted Power: 6dBm (max)
- Reference Distance: 10m
- Air Data Rate: 2Mbps
Add to Wishlist
Add to Wishlist
- Supply voltage: 3.2 – 6V DC
- Signal voltage: 3.2 – 6V DC
- Range: ~10m (in open air)
- LED indication present (indicates status of Bluetooth connection)
- Interface: UART (RX and TX)
- Baud rate in standard modes: 9600 (adjustable)
Add to Wishlist
Add to Wishlist
- Driver voltage: DC7-12V
- Working voltage: ≤1.2A
- Speed adjust:0%-100%
- Color: Green and Black
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000