- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Input Voltage (VCC): 3.3V~5.0V
- Switch Life Span: Over 200,000 times
- Interface: Gravity 3P Digital
- Dimension: 30.0mm*22.0mm
Add to Wishlist
Add to Wishlist
- Glass Length: 14mm
- Glass Diameter: 2mm
- Total Length: 45mm
- Max. Switching Voltage: 300 VDC
- Min. Breakdown Voltage: 150 VDC
- Max. Contact Rating: 10W
- Max. Switching Current: 0.55 A
- Max. Operate time: 0.45 ms
- Bounce time: 0.25 ms
- Max. Release time: 0.35 ms
- Resonant Frequency: 5000 HZ
- Max. Operating Frequency: 400 HZ
- Max. Contact Capacitance: 0.5 pF.
Add to Wishlist
Add to Wishlist
- Switch life: up to 10 million seconds.
- Open circuit resistance: 10Mohm.
- Supply Voltage: 3.3V to 5V.
- Interface: Digital.
Add to Wishlist
Add to Wishlist
- Operating Temperature: 0ºC to 85ºC.
- Storage Temperature: -40ºC to 85 ºC.
- Higher Temperature Version up to 125 ºC available on a Custom Basis.
- Operating Voltage: 5V.
- Interface Type: Gravity PH2.0 3Pin interface.
Add to Wishlist
Add to Wishlist
Modify your 3D printer to print fine details or large parts with E3D’s V6 nozzles. These nozzles are fully integrated into the E3D ecosystem of 3D printer parts and are compatible with V6, Lite6, and Titan Aero. Compatible with Purse 3D printers.
Add to Wishlist
Add to Wishlist
- Voltage: 3C ~ 5.5V
- Output Type: TTL
- Shake detection
- Guard alarm
Add to Wishlist
Add to Wishlist
- Model: SW-520D
- Product: Vibration Sensor
- Max voltage: 20V
- Max Current: 30mA
- Contact Resistance: < 10-ohm Insulation
Add to Wishlist
Add to Wishlist
- Filament Support: 1.75mm
- Material: High-quality brass
- Color: Brass color
- Nozzle Accuracy: 0.6mm
- Screw outer diameter: M6
Add to Wishlist
Add to Wishlist
- 3D Printer nozzle cleaning needle with a diameter of 0.4mm.
- 1 set includes 5 pieces of 0.4mm size needles.
- For all 0.4mm nozzle (RepRap, Ultimaker, Makerbot, Flashforge, and more).
Add to Wishlist
Add to Wishlist
- Filament Support: 1.75mm
- Material: High-quality brass
- Color: Brass color
- Nozzle Accuracy: 0.8mm
- Screw outer diameter: M6
Add to Wishlist
Add to Wishlist
- Vibration sensor: SW-18020P
- Can detect the vibration of the surrounding environment
- Max voltage: 12V
- Max current: 50mA
Add to Wishlist
Add to Wishlist
- Length: 4cm
- Head Diameter: 0.30mm
- Shank Diameter: 3.17mm
- Size: 0.1mm to 1mm (Approx.)
- Color: White
- These nozzle drill cleaners are powerful tools that any 3D printer owner must have.
- As blocks happen a lot during the printing, nozzles must be cleaned to ensure flowing printing.
Add to Wishlist
Add to Wishlist
- Length: 4cm
- Head Diameter: 0.8mm
- Shank Diameter: 3.17mm
- Size: 0.1mm to 0.8mm (Approx.)
- Color: Purpal
- These nozzle drill cleaners are powerful tools that any 3D printer owner must have.
- As blocks happen a lot during the printing, nozzles must be cleaned to ensure flowing printing.
Add to Wishlist
Add to Wishlist
- Model: DT1-028K
- Product: Piezo Film Sensor
- Min. input impedance: 1 MΩ, recommended: 10 MΩ
- Output voltage- mV to 100s of volts
- Operating temp: -40 to 60°C
Add to Wishlist
Add to Wishlist
- Product: COMUS Tilt Switch, 15 °, 60 Vac, 0.25 A
- Make Angle: 10° MAX Below Horizontal
- Break Angle: 10° MAX Above Horizontal
- Differential Angle: 15° MAX
- Operating Temperature: -37° to 100°C
Add to Wishlist
Add to Wishlist
- High Voltage Sensitivity (1 V/g)
- Over 5 V/g at Resonance
- Horizontal or Vertical Mounting
- Shielded Construction
- Solder-able Pins, PCB Mounting
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000