Waveshare Tilt Sensor

SKU: 1219083
Out of stock

259.00

Add to Wishlist
Add to Wishlist
  1. Voltage: 3C ~ 5.5V
  2. Output Type: TTL
  3. Shake detection
  4. Guard alarm
Out of stock

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist

Description

This tilt sensor module is used for inclination indication. It is based on a mercury switch that contains a blob of mercury. When the body moves to a specific angle (usually around 30°), it shorts two pins and thus closes the circuit and tilt is detected and the signal output is high.

The simplicity of this sensor makes them popular for toys, motion detection alarms, gadgets and appliances.

Application:

  1. Shake detection
  2. Guard alarm
  3. Smart car
  4. Electric bricks

Features: 

  1. Detects shake signal
  2. Signal output indicator

Package Includes:

1 x Tilt Sensor
1 x 3-pin custom connector jumper wire

Additional information

Input Voltage (V)

3C ~ 5.5V

Output Type

TTL

Mounting Hole Diameter (mm)

2.0mm

Interface

Digital Output, GND, VCC

Dimensional Accuracy (mm)

19.0mm * 16.0mm

Quick Comparison

SettingsWaveshare Tilt Sensor removeDFRobot Gravity: Digital Shake Sensor removeSW-520D Vibration Sensor Metal Ball Tilt Switch (pack of 2) removeDFRobot Gravity Digital Vibration Sensor removeTE CONNECTIVITY DT1-028K Piezo Film Sensor, Vibration, DT Series, Without Leads, 1.38 nF removeTE CONNECTIVITY Vibration Sensor, MiniSense 100, Cantilever Type, 16 pC/g, No Mass remove
NameWaveshare Tilt Sensor removeDFRobot Gravity: Digital Shake Sensor removeSW-520D Vibration Sensor Metal Ball Tilt Switch (pack of 2) removeDFRobot Gravity Digital Vibration Sensor removeTE CONNECTIVITY DT1-028K Piezo Film Sensor, Vibration, DT Series, Without Leads, 1.38 nF removeTE CONNECTIVITY Vibration Sensor, MiniSense 100, Cantilever Type, 16 pC/g, No Mass remove
Image
SKU121908311416191308098120999613739771373861
Rating
Price259.00249.0015.00269.00649.00369.00
Stock
Out of stock
In Stock
Out of stock
In Stock
In Stock
In Stock
AvailabilityOut of stockIn StockOut of stockIn StockIn StockIn Stock
Add to cart

Read more

Add to cart

Read more

Add to cart

Add to cart

Add to cart

Description
  1. Voltage: 3C ~ 5.5V
  2. Output Type: TTL
  3. Shake detection
  4. Guard alarm
  1. Input Voltage (VCC): 3.3V~5.0V
  2. Switch Life Span: Over 200,000 times
  3. Interface: Gravity 3P Digital
  4. Dimension: 30.0mm*22.0mm
  1. Model: SW-520D
  2. Product: Vibration Sensor
  3. Max voltage: 20V
  4. Max Current: 30mA
  5. Contact Resistance: < 10-ohm Insulation
  1. Switch life: up to 10 million seconds.
  2. Open circuit resistance: 10Mohm.
  3. Supply Voltage: 3.3V to 5V.
  4. Interface: Digital.
  1. Model: DT1-028K
  2. Product: Piezo Film Sensor
  3. Min. input impedance: 1 MΩ, recommended: 10 MΩ
  4. Output voltage- mV to 100s of volts
  5. Operating temp: -40 to 60°C
  1. High Voltage Sensitivity (65 mV/g)
  2. Over 6 V/g at Resonance
  3. Horizontal or Vertical Mounting
  4. Shielded Construction
  5. Solderable Pins, PCB Mounting
Content

This tilt sensor module is used for inclination indication. It is based on a mercury switch that contains a blob of mercury. When the body moves to a specific angle (usually around 30°), it shorts two pins and thus closes the circuit and tilt is detected and the signal output is high.

The simplicity of this sensor makes them popular for toys, motion detection alarms, gadgets and appliances.

Application:

  1. Shake detection
  2. Guard alarm
  3. Smart car
  4. Electric bricks

Features: 

  1. Detects shake signal
  2. Signal output indicator

Package Includes:

1 x Tilt Sensor
1 x 3-pin custom connector jumper wire

DFrobot offers an advanced level of sensors at an affordable cost than any other competitor brand in the market, making them ideal for the one who wants to start some Projects through Different types of sensors.

After finding Different types of sensors on market, we at robu.in have determined that DFrobot is one of the good brands that offer a wide range of sensors at an Appropriate price.

Do you want to switch lights by just shaking your hand? However, you may don’t want to use a complicated and costly triple-axis accelerometer. This digital shake sensor is sure to meet your needs.

The digital shake sensor is to detect handshaking which is only sensitive to unidirectional hand movements. The spring-type vibration switch is used to output a low-level pulse when the user shakes once in the specified direction and the onboard indicator flashes at the same time. Thanks to the unidirectional sensitivity of the vibration switch and the corresponding filter circuit, it has a strong anti-shock interference capability to prevent false triggering. Simple and easy, switch controls are all in just a single shake.

Interfacing Digital Shake Sensor with Arduino:

 

Application:
  1. Shaking Light Stick
  2. Shake Switch

Features:

  1. Unidirectional sensitive, strong anti-shock interference, preventing false triggering
  2. Compatible with 3.3V/5V controller
  3. Compact design, easy to install

Package Includes:

1 x Gravity: Digital Shake Sensor

1 x  Gravity 3P Digital Wire

This SW-520D Vibration Sensor Metal Ball Tilt Switch is sealed in shrink tubing to avoid short circuits. One end of the sensor has two conductive elements (poles). When the sensor is oriented so the leads are downwards, the mass rolls onto the poles and shorts them, acting as a throw switch. While not as precise or flexible as a full accelerometer, roller ball tilt switches can detect motion or orientation simply. Accelerometers, on the other hand, output digital or analog voltage that must then be analyzed with extra circuitry.


Specifications:

  1. Model: SW-520D
  2. Product: Vibration Sensor
  3. Contact Rating:12V
  4. Contact Resistance: < 10-ohm Insulation
  5. Insulation Resistance:>10M ohm
  6. Max voltage: 20V
  7. Max Current: 30mA
  8. ON at 30-90 degrees from horizontal position
  9. Pins have no polarity – can be interchanged
  10. Color:Black / Gray

Packages Includes: 

1 x SW-520D Vibration Sensor Metal Ball Tilt Switch (pack of 2)

They are used for measuring fluctuating accelerations or speeds or for normal vibration measurement. Maintenance professionals use the sensors in order to predict the maintenance of the machinery, to reduce overall costs and increase the performance of the machinery,  The vibration levels can be supplied to any controllers/processors/ and necessary decisions can be obtained as required though it, This module has triple output mode i.e. – digital output – is simple, analog output which is more accurate and serial output with exact readings. The generally 3 types of vibration sensors are  there 1) displacement sensors, 2) velocity sensors, 3) accelerometers. Accelerometers are the best choice for most industrial rotating assets because they are simple, easy to apply, and very sensitive to the high-frequency vibrations typically generated during force-failure.

Applications:

  1.  food & beverage.
  2. mining.
  3. metalworking.
  4. gas & oil, paper.
  5. wind power.
  6. power generation.

Features:

  1. Standard assembling structure (Times-of-5mm Center distance between two 3mm mounting holes).
  2. Easily precognitive interfaces of sensors (“A” for analog and “D” for digital).
  3. Icons to simplify illustrate sensor function .
  4. Low Cost.
  5. High quality connector.
  6. Immersion gold surface.

Specifications:

  1. IO Type: Digital.
  2. Switch life: up to 10 million seconds.
  3. Open circuit resistance: 10Mohm.
  4. Supply Voltage: 3.3V to 5V.
  5. Interface: Digital.
  6. Size:22x30mm (0.87 x 1.18 in).

Packages Includes:

1 x DF Robot Gravity Digital Vibration Sensor.

The DT series of piezo film sensors elements are rectangular elements of piezo film with silver ink screen printed electrodes. They are available in a variety of different sizes and thicknesses. The DT film element produces more than 10 millivolts per microstrain, about 60 dB higher than the voltage
output of a foil strain gauge. The capacitance is proportional to the area and inversely proportional to the thickness of the element. The DT series sensors are the simplest form of piezo film sensors, used primarily as dynamic strain gages and contact microphones for vibration or impact detection. These are available without any leads for those applications where the customer wants to make their own lead attachment. The sensor can be readily adhered to a surface with double-sided tape or epoxy. Lead attachment can be achieved by compressive clamping, crimps, eyelets, conductive epoxy or low temperature solders

Applications:

  1. Sensing contact forces
  2. Recording the time of an event
  3. Counting the number of impacts
  4. Make your own sensor element

Specifications:

  1. Thin Piezo polymer w/ high piezo activity
  2. Flexible silver ink metallization
  3. Min. input impedance: 1 MΩ, recommended: 10 MΩ
  4. Output voltage- mV to 100s of volts
  5. Operating temp: -40 to 60°C

Packages Includes:

1 x TE CONNECTIVITY DT1-028K Piezo Film Sensor, Vibration, DT Series, Without Leads, 1.38 nF

The MiniSense 100NM is a low-cost cantilever- type vibration sensor offering moderate sensitivity over a useful frequency band up to 200 Hz. Pins are designed for easy installation and are solderable. Horizontal and vertical mounting options are offered. The active sensor area is shielded for improved RFI/EMI rejection. Rugged, flexible PVDF sensing element withstands high shock overload. Sensor has excellent linearity and dynamic
range, and may be used for detecting either continuous vibration or impacts.

Applications:

  1. Low Cost Vibration Sensing
  2. Car Alarms
  3. Body Movement
  4. Medical Applications
  5. Security Systems

Note: For more info refer to datasheet


Features:

  1. High Sensativity
  2. Higher Resonaant Frequency
  3. Solderable
  4. Shielded
  5. Rugged
  6. Withstands High Shock

Packages Includes:

1 x TE CONNECTIVITY Vibration Sensor, MiniSense 100, Cantilever Type, 16 pC/g, No Mass

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Input Voltage (V)

3C ~ 5.5V

Output Type

TTL

Mounting Hole Diameter (mm)

2.0mm

Interface

Digital Output, GND, VCC

Dimensional Accuracy (mm)

19.0mm * 16.0mm

Operating Voltage(V)

3.3~5.0

Life Cycle

Over 200, 000 times

Interface

Gravity 3P Digital

Dimensions in mm (LxWxH)

30x22x7

Weight (gm)

5

High Voltage Sensitivity

65 mV/g

Resonance

6 V/g

Mounting

Horizontal or Vertical

Construction

Shielded

Pin type

Solderable Pins, PCB Mounting

Linearity

1%

Operation Below Resonance

Up to 200 Hz (12, 000 rpm) Operation Below Resonance