- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Input Voltage (V): 7 ~ 24
- Max. Continuous Current: 1A
- Peak Motor Current: 2A@10s
- PWM Frequency: 20Khz
- On-Board DC motor Driver L298N.
- 5 mm standard DC plug-in jack for Input supply
Add to Wishlist
Add to Wishlist
- Operating Voltage: 6-30 VDC
- Operating Current: up to 8A
- Material: ABS
- Frequency:16 Khz
- Dimension:80x40x25 mm
Add to Wishlist
Add to Wishlist
- Nominal Voltage:6~30 V
- continuous Current:50A
- peak Current: 100A
Add to Wishlist
Add to Wishlist
- Input Voltage (VCC): 3.3V~5.0V
- Switch Life Span: Over 200,000 times
- Interface: Gravity 3P Digital
- Dimension: 30.0mm*22.0mm
Add to Wishlist
Add to Wishlist
- Glass Length: 14mm
- Glass Diameter: 2mm
- Total Length: 45mm
- Max. Switching Voltage: 300 VDC
- Min. Breakdown Voltage: 150 VDC
- Max. Contact Rating: 10W
- Max. Switching Current: 0.55 A
- Max. Operate time: 0.45 ms
- Bounce time: 0.25 ms
- Max. Release time: 0.35 ms
- Resonant Frequency: 5000 HZ
- Max. Operating Frequency: 400 HZ
- Max. Contact Capacitance: 0.5 pF.
Add to Wishlist
Add to Wishlist
- Driver voltage: DC7-12V
- Working voltage: ≤1.2A
- Speed adjust:0%-100%
- Color: Green and Black
Add to Wishlist
Add to Wishlist
- Switch life: up to 10 million seconds.
- Open circuit resistance: 10Mohm.
- Supply Voltage: 3.3V to 5V.
- Interface: Digital.
Add to Wishlist
Add to Wishlist
- Operating Temperature: 0ºC to 85ºC.
- Storage Temperature: -40ºC to 85 ºC.
- Higher Temperature Version up to 125 ºC available on a Custom Basis.
- Operating Voltage: 5V.
- Interface Type: Gravity PH2.0 3Pin interface.
Add to Wishlist
Add to Wishlist
- Voltage: 3C ~ 5.5V
- Output Type: TTL
- Shake detection
- Guard alarm
Add to Wishlist
Add to Wishlist
- Model: T9545-A
- Length : 24o.13 mm (9.5 inch)
- Shaft Hole Diameter: 5.5 mm
- Pitch : 114.3 mm (4.5 Inch)
- Rotation: 1-CW & 1-CCW
- Material: Glass Fiber Nylon
- Color: Black
- Weight (gm): 27
Add to Wishlist
Add to Wishlist
- Input voltage: DC12 to 36V (equal to the rated voltage of the motor)
- Output voltage: linear under load
- Maximum current: 50A
- Continuous current: 40A
- Speed regulation mode: potentiometer (linear)
- Support motor: DC brush motor
Add to Wishlist
Add to Wishlist
- Model: SW-520D
- Product: Vibration Sensor
- Max voltage: 20V
- Max Current: 30mA
- Contact Resistance: < 10-ohm Insulation
Add to Wishlist
Add to Wishlist
- Drive plate type: JYQD_V6.3E2
- Voltage range: 15V-36V
- Peak current: 20A
-
PWM speed control: PWM frequency 1-20KHZ
-
Duty cycle: 0-100%
- Drive power: ≤ 500W
Add to Wishlist
Add to Wishlist
- Input voltage: DC12 to 36V (equal to the rated voltage of the motor)
- Output voltage: linear under load
- Maximum current: 50A
- Continuous current: 40A
- Support motor: DC brush motor
Add to Wishlist
Add to Wishlist
- Vibration sensor: SW-18020P
- Can detect the vibration of the surrounding environment
- Max voltage: 12V
- Max current: 50mA
Add to Wishlist
Add to Wishlist
- Model: DT1-028K
- Product: Piezo Film Sensor
- Min. input impedance: 1 MΩ, recommended: 10 MΩ
- Output voltage- mV to 100s of volts
- Operating temp: -40 to 60°C
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000