- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Supply Voltage:1.95V to 3.6V
- Digital Interface Supply Voltage:1.6V to 3.6V
- Pressure range:0,05~0.11 MPa
- Weight:2 gm
Add to Wishlist
Add to Wishlist
- Operating Voltage: 5V
- Operating Current : 80-100mA
- Power Cycling: above 500ms
- Dimension:55x48x11 mm
- Weight:12 gm
Add to Wishlist
Add to Wishlist
- Model: YZC-516C
- Capacity: 200 kg
- Cable Length: 3 m
- Weight:547 gm
Add to Wishlist
Add to Wishlist
- Model: YZC-516C
- Capacity: 100 kg
- Excitation Voltage:5-12 V
- Material: Alloy Steel
- Weight:609 gm
Add to Wishlist
Add to Wishlist
- Shell Dimensions: 100 mm
- Range: 5 kg
- Converter Module: HX711 A
- Cable Length: 18 cm
- Fitting ScrewHole Size: M3
- Rated output: 1.0 0.1mV / V
- Nonlinear: 0.05% F.S
Add to Wishlist
Add to Wishlist
- Input Voltage: 3.3V~5.5V
- Operating Current: 5mA (25mA in VOC Measurement)
- Communication Interface: I2C(Support 3.3V/5V) or SPI(other non-I2C ports only support 3.3V)
- Default I2C Address: 0x76
- Temperature Measurement Range: -40℃~+85℃
- Temperature Measurement Precision: ±1.0℃(0~65℃)
- Humidity Measurement Range: 0-100%r.H.
- Humidity Measurement Precision: ±3%r.H.(20-80% r.H.,25℃)
Add to Wishlist
Add to Wishlist
- Resistance:120 Ω
- Strain Limit:2%
- Sensitivity Coefficient:2.10
Add to Wishlist
Add to Wishlist
- Force Measuring Range: 20 g to 5 kg
- 39.70 x 39.70mm active area
- Standard square format
- Connector housing (female, equivalent to Nicomatic 14106-12 and OF02)
Add to Wishlist
Add to Wishlist
- Conductivity range: 100 µS/cm to 200 mS/cm
- Cell constant4): typical 0.86 cm-1
- Nominal resistance: 1000 Ω at 0 °C
- Measurement frequency range: 100 Hz to 10 kHz
Add to Wishlist
Add to Wishlist
- Easily customizable to a wide range of sizes.
- Cost-effective.
- Ultra-thin; 0.45 mm.
- Robust; up to 10 million actuations.
- Simple and easy to Integrate.
Add to Wishlist
Add to Wishlist
- Working Voltage: 3.3V DC.
- Working Current: 35mA.
- Output Signal: I2C, UART.
- Working Temperature: -20~70℃.
- Size: 30mm x 20.5mm/1.18 x 0.81″
Add to Wishlist
Add to Wishlist
- 40PIN GPIO, Compatible with all the Raspberry Pi Boards.
- Onboard TSL25911FN digital ambient light sensor, for measuring IR and visible light
- Onboard BME280 sensor, for measuring temperature, humidity, and air pressure
- Onboard ICM20948 motion sensor, accelerometer, gyroscope, and magnetometer
- Onboard LTR390-UV-1 sensor, for measuring UV rays
- Onboard SGP40 sensor, for detecting ambient VOC
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Communication interface: I2C/SPI
- Dimension: 27mm x 20mm
- Mounting hole size: 2.0mm
Add to Wishlist
Add to Wishlist
- Gravity interface, no need to solder, plug and play
- Switchable I2C and UART, two output modes
- Highly integrated module can test a variety of data at the same time
- Reasonable layout and high precision
Add to Wishlist
Add to Wishlist
- A silicone-gel covered pressure sensing gauge with a pre-calibrated and compensated 24 bit ADC
- Measure absolute pressure 0 to 25 PSI
- The port is made of stainless steel and is 3.7mm long and 2.5mm diameter
- 3.3V power regulation and level shifting
- Weight: 2g
Add to Wishlist
Add to Wishlist
- PM, NOx, VOC, RH & T Sensor Platform
- Fast and Easy integration
- One Driver for up to 8 data signal
- Superior Sensing accuracy and lifetime
- Fully calibrated digital output
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000