- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
₹0.00
- Input Voltage:7-24V
- Interface Serial
- Compatibility MKR size
- Transceiver MAXIM MAX3157
- Buck converter Texas Instruments TPS54232
- Switchable onboard termination resistor
- Input voltage range: 55.5V
- Charging cut-off voltage: (4.2V/4.35V) ±0.5%:
- Charging current: 2.4A±5%
- Boost output voltage: 5V5.15V (wire loss compensation)
- Boost output voltage ripple: 100mV
- Weight:3 gm
- Input Voltage: 1.5V to 5V DC
- Output Voltage: 3.3V DC
- Dimensions (L x W)mm: 11 x 7
- Module model: SZ-BT07CCCV-D1
- Dimensions: 130mm x 50mm x 74mm
- Input voltage: DC10-60V
- Input current:
- 10-30V input voltage, maximum current 30A
- 31-60V input voltage, maximum current 25A
- Static working current: 15mA
- Output voltage:
- 12-90V continuously adjustable (default output is adjusted to 19V)
- 12-90V fixed output
- VCCA Voltage Range: 1.2V-3.6V
- VCCB Voltage Range: 1.65V-5.5V
- Conditions of Use: VCCB>VCCA
- Working Current: 30uA
- Support Port: push-pull, open-drain
- Conversion Speed: push-pull 60Mbps(MAX)open-drain 2Mbps(MAX)
- Input Voltage:2.5V~VOUT-0.5V
- Output Voltage: can be set to 5V/8V/9V/12V
- The maximum output current reaches 1A.
- Low power consumption.
- The LED indicator can be turned off by the pad next to it.
- Product: DC Conversion Power Module
- Input Voltage Range:2.8V-5.5V
- Output Voltage:+/-12V (V +:+12V;V-:-12V)
- Output Current:+12V stable output current capability of 50mA,-12V stable output current capability 30mA,almost meet all ADC, DAC and amplifier applications
- Size:2.4×1.2cm
- Model: XL6019
- Product: Adjustable Boost Power Supply Module
- Input Current: 5A (MAX)
- Input Voltage: DC 3-35 V Switching
- Working Temperature: Industrial (-40 ° C to + 85 ° C)
- Negative Output Voltage: DC 5-40V (Adjustable)
- Frequency: 220 kHZ
- Model: XH-M411
- Input Voltage: 3V-35V
- Output Voltage: 5V-45V
- Input Current: 5A(Peak)
- Voltage Display Range: 5V-30V(if the input voltage is lower than 4.5V, it will not display)
- Voltage Display Error: ±0.1V
- Size: 72*48*16mm
- Voltage : Input through (USB) DC 5V
- Output via (DC Round Pin) : DC 12V
- Cable Length: 1 meter / 2 meter
- Color: BLACK
- Input / Output Current: Maximum input 1
- Best-in-class all-around performance
- Confident driving in all weather conditions
- Visual Alignment Indicators
- Best-in-class all-around performance
- Confident driving in all weather conditions
- Visual Alignment Indicators
The MKR CAN Shield is based on the MCP2515 CAN controller and the TJA1049 CAN transceiver. Mounting this shield on a MKR family board allows you to connect to existing CAN systems. It also features the TPS54232 buck converter from Texas Instruments.
Want to connect several Seeed Studio Grove modules to your Arduino board? The Arduino MKR CONNECTOR CARRIER is the perfect companion for Arduino MKR boards and a Grove ecosystem.
These sensors are of the latest generation and measure:
- Atmospheric pressure
- Temperature and humidity
- Light intensity (in LUX, max 650)
To help you build projects and store the data collected locally, this shield has a slot for a microSD card
The MKR GPS Shield is based on the u-blox SAM-M8Q GNSS (Global Navigation Satellite System) module. It can be used to add GPS to any of your MKR boards. To use this shield, you can refer to the documentation of the MKR GPS library.
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000