-
Fast Shipping
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
-
Normal Shipping
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
₹4,680.29 (Including tax)
Discount per Bulk Quantity
Quantity | Discount | Price |
---|---|---|
5 - 10 | 5% | ₹4,446.27 (Including tax) |
11 - 20 | 8% | ₹4,305.86 (Including tax) |
21 - 40 | 10% | ₹4,212.26 (Including tax) |
41 - 100 | 12% | ₹4,118.65 (Including tax) |
Out of stock
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
Get the Priority Shipping on Prepaid Orders
Prepaid Orders
Get Normal Delivery (Surface) with Cash On Delivery
COD Orders
DFrobot offers an advanced level of sensors at an affordable cost than any other competitor brand in the market, making them ideal for the one who wants to start some Projects through Different types of sensors.
After finding Different types of sensors on market, we at robozar. in have determined that DFrobot is one of the good brands that offer a wide range of sensors at an Appropriate price.
DFRobot offers a 3.3/5V compatible MEMS gas concentration sensor. This sensor can detect a variety of gas concentrations, including CO, C2H5OH (alcohol), H2, NO2, and NH3, and the code includes various gas concentration conversion formulas to make sensor testing and use easier. It’s compatible with Arduino, ESP32, Raspberry Pi, and other mainstream controllers thanks to its I2C output and 3.35.5V wide voltage input.
Please visit the DFrobot wiki page for more information about this product. Any suggestions for improvement, such as correcting errors, adding more demo codes or tutorials, will be highly appreciated.
1 x Gravity: MEMS CO, Alcohol, NO2 & NH3 Gas Sensor
1 x Gravity-4pin I2C Cable
Model |
MiCS-4514 |
---|---|
Operating Voltage(V) |
3.3~5.5 |
Power Consumption (Watt) |
0.45 |
Communication Interface |
I2C |
Measuring Range |
1 – 1000ppm (Carbon monoxide CO) 0.05 – 10ppm (Nitrogen dioxide NO2) 10 – 500ppm (Ethanol C2H5OH) 1 – 1000ppm (Hydrogen H2) 1 – 500ppm (Ammonia NH3) >1000ppm (Methane CH4) |
Operating Temperature Range (°C) |
-30~85 |
Opt. Relative Humidity(RH) |
5~95% |
Mounting Holes Diameter (mm) |
ID:3.1 ,OD:6 |
Dimensions in mm (LxWxH) |
37x27x6 |
Weight (gm) |
10 |
Only logged in customers who have purchased this product may leave a review.
Shipping and Delivery Policy
1. Shipping Process:
2. Shipping Charges:
3. Order Tracking:
4. Delivery Address:
5. Delivery Issues:
6. No Return Policy for Opened/Soldered Products:
7. Refund Policy:
Out of stock
Out of stock
Out of stock
Out of stock
Gas Detection |
Carbon Dioxide (CO2) |
---|---|
Operating Voltage |
4.5 ~ 5.5V DC |
Average Current |
<85mA |
Output |
UART |
Measuring Range |
0 ~ 50000ppm |
Accuracy |
± (50ppm + 5% reading) |
Preheating Time |
3min |
Response Time |
T90 < 30s |
Operating Temperature |
0 ~ 50 ℃ |
Operating Humidity |
0 ~ 95% RH (no condensation) |
Service Life |
>5 years |
Out of stock
Out of stock
Model No. |
TGS2602-B00 |
---|---|
Heater Voltage |
5.0±0.2V DC |
Circuit Voltage |
5.0±0.2V DC |
Heater power consumption |
280mW (typical) |
Heater Current |
56±5mA |
Sensing Principle |
MOS type |
Heater Resistance |
approx 59Ω at room temp. (typical) |
Load Resistance |
variable 0.45kΩ min |
Sensor Resistance |
10kΩ ~ 100kΩ in air |
Standard Package |
TO-5 metal can |
Target Gases |
Air contaminants (VOCs ,ammonia ,H2S ,etc.) |
Test Gas Conditions |
normal air at 20±2˚C ,65±5%RH |
Out of stock
Model number |
TGS5141-P00 |
---|---|
Output current in CO |
1.2~3.2nA/ppm |
Target Gases |
Carbon monoxide |
Typical detection range |
0 ~ 5 ,000ppm |
Baseline offset(*1) |
<±10ppm equivalent |
Operating temperature |
10ËšC ~ +50ËšC (continuous) -20ËšC ~ +60ËšC (intermittent) |
Operating humidity |
10 ~ 95%RH (no condensation) |
Response time (T90) |
within 60 seconds |
Storage conditions |
-10ËšC ~ +50ËšC (continuous) -20ËšC ~ +60ËšC (intermittent |
Standard test conditions |
20±2˚C ,40±10%RH |
Weight |
approx. 2.5g |
Out of stock
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.