SeeedStudio GrovePi+

Getting started with SeeedStudio GrovePi+

14 People watching this product now!

SKU: rz24319811 Category: Raspberry Pi Hats

Description

GrovePi+ is an add-on board with 15 Grove 4-pin interfaces that brings Grove sensors to the Raspberry Pi. It is the newest version compatible with Raspberry Pi model B/B+/A+/2/3/4 perfectly.

GrovePi+ is an easy-to-use and modular system for hardware hacking with the Raspberry Pi, no need for soldering or breadboards: plug in your Grove sensors and start programming directly. Grove is easy to use a collection of more than 100 inexpensive plug-and-play modules that sense and control the physical world. By connecting Grove Sensors to Raspberry Pi, it empowers your Pi in the physical world. With hundreds of sensors to choose from Grove families, the possibilities for interaction are endless.

What is New

Compatible with Raspberry Pi model B/B+/A+/2/3/4
Faster SPI and higher reliability UART connections
Easier to assemble camera cables and LCD cables
Simplified procedures of firmware update

Set-up in 4 simple steps

Step 1 – Slip the GrovePi+ board over your Raspberry Pi
Step 2 – Connect the Grove modules to the GrovePi+ board
Step 3 – Upload your program to Raspberry Pi
Step 4 – Begin taking in the world data

Features:

7 digital ports
3 analogue Ports
3 I2C ports
1 Serial port connect to GrovePi
1 Serial port connect to Raspberry Pi
Grove header Vcc output Voltage: 5Vdc
Battery Exclude
Grove Ports: 7 Digital(5V) 3 Analog(5V) 3 I2C(5V) 1 SERIAL: Connect to ATMEGA328P D0/1(5V) 1 RPISER: Connect to Raspberry Pi(3.3V) 1 ISP
Grove-Digital: Connect to ATMEGA328P digital pins and transfer to I2C signal, then through level converter to Raspberry Pi
Grove-Analog: Connect to ATMEGA328P analogue pins(10bit ADC) and then transfer to I2C signal, then through level converter to Raspberry Pi
Grove-I2C: Connect through a level converter to Raspberry Pi
RPISER: Connect to Raspberry Pi directly
SERIAL: Connect to ATMEGA328P digital pins D0/D1 and transfer to I2C signal, then through level converter to Raspberry Pi
ISP: Burn firmware to ATMEGA328P

Package Includes :

1 x SeeedStudio GrovePi+

Additional information

MCU	ATMEGA328P
Operating Voltage (VDC)	5
Analog I/O Pins	3
On Board Ports	3 analogue Ports , 3 I2C ports , 7 digital ports

Reviews (0)

Rated 0 out of 5

0 reviews

Rated 5 out of 5

Rated 4 out of 5

Rated 3 out of 5

Rated 2 out of 5

Rated 1 out of 5

Reviews

Clear filters

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shipping & Delivery

Shipping and Delivery Policy

1. Shipping Process:

Orders are processed within 1-2 business days after payment confirmation.
Delivery time varies based on location and selected shipping method, typically ranging between 3-7 business days.
We partner with trusted courier services to ensure timely and safe delivery.

2. Shipping Charges:

Shipping charges are calculated at checkout based on the delivery location and package weight.
Free shipping may be available for orders above a specified amount, as mentioned on our website.

3. Order Tracking:

Once your order is shipped, you will receive a tracking ID via email or SMS to monitor the shipment status.

4. Delivery Address:

Please provide a complete and accurate delivery address to avoid delays.
We are not responsible for delivery failures due to incorrect or incomplete address details provided by the customer.

5. Delivery Issues:

If a package is delayed, lost, or damaged during transit, please contact our support team immediately.
Claims for lost or damaged items must be reported within 48 hours of delivery.

6. No Return Policy for Opened/Soldered Products:

We do not accept returns for products that have been opened, used, or soldered.
Ensure you verify product compatibility before purchase, as returns will only be accepted for unopened and unused items in their original packaging.

7. Refund Policy:

Refunds will be issued only for canceled orders before shipment or wrong/damaged items received (subject to investigation).
No refunds or replacements for products that have been tampered with, soldered, or physically damaged by the customer.

PiKVM v3 HAT for Raspberry Pi 4 by HiPi

Out of stock

₹26,270.33 – ₹29,852.65 (Including tax)

SKU: rz24313813

Pimoroni Skywriter HAT – 3D Gesture Sensor for Raspberry Pi RoHS Compliant

Out of stock

₹4,893.68 – ₹5,560.98 (Including tax)

SKU: rz24314033

Brand	Adafruit
Product Type	Raspberry Pi Pimoroni Skywriter HAT
Electrical near-field	3D/gesture sensing
PCB	4-layer PCB for best sensing performance
Senses range	Senses from up to 5cm away
Color	Black
Info	Full 3D position data and gesture information (swipes , taps)
Product Status	Comes fully assembled
API	Full Python API
PCB Dimension	56mm x 65mm x 2mm / 2.2" x 2.6" x 0.8"
Height w/ Socket	5mm / 0.2"
Weight (g)	15g

Waveshare 2-Channel Isolated CAN Expansion HAT for Raspberry Pi, Dual Chips Solution

Out of stock

₹2,614.01 – ₹2,970.47 (Including tax)

SKU: rz24311093

CAN controller	MCP2515
CAN transceiver	SI65HVD230(or SN65HVD230)
Communication interface	SPI
Operating voltage	5V
Logic level	3.3V/5V
Dimension	65 × 56.5(mm)

Waveshare CAN bus Module (B) for Raspberry Pi Pico, enabling long range communication through SPI

Out of stock

₹1,790.05 – ₹2,034.15 (Including tax)

SKU: rz2435308

Waveshare EM06-E LTE Cat-6 HAT for Raspberry Pi, Dual Antennas LTE-A, Multi Regions Multi Band, GNSS

Out of stock

₹11,283.61 – ₹12,822.29 (Including tax)

SKU: rz24313949

Waveshare HRB8825 Stepper Motor HAT For Raspberry Pi

Out of stock

₹1,813.93 – ₹2,061.29 (Including tax)