Sort by
STMICROELECTRONICS Expansion Board, M24LR Dynamic NFC/RFID Tag IC, For STM32 Nucleo
Out of stock
STMICROELECTRONICS Development Board, STM32F446ZE MCU, On-Board Debugger, Arduino, ST Zio and Morpho Compatible
Out of stock
Model |
STMICROELECTRONICS Development Board ,STM32F446ZE MCU |
---|---|
Voltage |
3.3 V and 7 – 12 V |
Crystal oscillator |
32.768 KHz |
On-board ST-LINK/V2-1 debugger/programmer with SWD connector |
Selection-mode switch to use the kit as abstandalone ST-LINK/V2-1 USB re-enumeration capability. Three different interfaces supported on USB: virtual COM port ,mass storage ,debug port |
Two push-buttons |
USER and RESET |
Dimensions (mm) LxWxH |
13 x 7 x 2mm |
Weight |
54g |
STMICROELECTRONICS Expansion Board, VD6283, STM32 Nucleo Boards
Out of stock
SILICON LABS SIP Module Radio Board, Z-Wave, ZGM230S, ARM, Cortex-M33, BRD4205B Radio Board
Out of stock
STMICROELECTRONICS EXPANSION BOARD X-NUCLEO-IKS02A1 STM32 NUCLEO DEV BOARD
Out of stock
STMICROELECTRONICS Expansion Board, 2.1-Channel Audio System, 2x50W, STA350BW, For STM32 Nucelo, Arduino Compatible
Out of stock
STMICROELECTRONICS Expansion Board, STSPIN220 Low Voltage Stepper Motor Driver, For STM32 Nucleo
Out of stock
STMICROELECTRONICS I2C/SPI EEPROM MEMORY EXPANSION BOARD
Out of stock
CORALÂ G650-03324-01Â Development Board Mini, MT8167s, SoC, MCU, ARM Cortex-A35 MCU
Out of stock
AVNET Development Kit, 96Boards Click Mezzanine Starter Kit, LS Mezzanine Board, 3 x Click Boards
Out of stock
STMICROELECTRONICS Development Board, STM32F303ZE MCU, On-Board Debugger, Arduino, ST Zio and Morpho Compatible
Out of stock
Neo3 LTS
Out of stock
CPU |
RockChip RK3328 ,Quad-core 64-bit high-performance Cortex A53 |
---|---|
DDR4 RAM |
1GB/2GB 32-bit DDR4 |
USB Host |
1x USB3.0 Type A and 2x USB2.0 on 2.54mm pin header |
Buttons |
User button x1 |
microSD Slot |
MicroSD x 1 for system boot and storage |
GPIO |
2.54mm pitch 26 pin-header ,include I2C ,UART ,SPI ,I2S ,GPIO |
Serial Debug Port |
2.54mm pitch 3 pin-header ,115200bps |
LED |
Power LED x 1 ,System LED x 1 |
PCB Dimension |
48 x 48mm |
Power |
5V/1A ,via Type-C or GPIO |
Working temperature |
-20℃ to 70℃ |
OS Support |
FriendlyWrt 21.02.1 (64-bit) Ubuntu Core 18.04 (64-bit)(Linux-5.4 + U-boot-2017.11) |