Control your 3 AC application up to 1000W operating power for each device with this RF smart switch. This is 3 channel smart relay switch to ON and OFF 220V @50Hz AC applications. It is very easy to install at your existing switchboard to make it wireless with remote control in your hand. RF Remote operates on 433MHz RF frequency with up to 30meter of Range. This Relay system can be used for the applications like incandescent Light, FAN, TV sets, or any other applications under 1000W operating power.

The Remote control you get with this smart switch comes with 2 buttons to ON/OFF device.

Wiring Guide:

1. Blue Wire: Application Phase
2. Black Wire1: Application Neutral
3. Black Wire2: AC Input Neutral
4. Red Wire:  AC Input Phase

Features:

1. Quick and easy installation,
2. The range is not obstructed by walls,
3. Capable of connecting any loads under 1000 Watts operating Power.
4. Remote controller and switch can be used simultaneously for ease and flexibility
5. Every set of remote-controlled switches has its special code. More sets can be used in one room without interference
6. Can be used in house stairs, aisle, corridor, bathroom, warehouse, garage, factory, workshop

Package Includes:

1 x 1 Channel RF Wireless ON/OFF Smart Switch with RF Remote Control

Control your 3 AC application up to 1000W operating power for each device with this RF smart switch. This is 3 channel smart relay switch to ON and OFF 220V @50Hz AC applications. It is very easy to install at your existing switchboard to make it wireless with remote control in your hand. RF Remote operates on 433MHz RF frequency with up to 30meter of Range. This Relay system can be used for the applications like incandescent Light, FAN, TV sets, or any other applications under 1000W operating power.

The Remote control you get with this smart switch comes with 4 buttons, out of it 3 buttons are given control 3 devices individually and 1 button is to ON/OFF  all devices in one stroke.

Note: Battery is not included with the Remote.

Wiring Guide:

1. Blue Wire: Application-1 Phase
2. Yellow Wire: Application-2 Phase
3. White  Wire: Application-3 Phase
4. Black Wire1: Application 1+2+3 Neutral (common Neutral)
5. Black Wire2: AC Input Neutral
6. Red Wire:  AC Input Phase

Features:

1. Quick and easy installation,
2. The range is not obstructed by walls,
3. Capable of connecting any loads under 1000 Watts operating Power.
4. Remote controller and switch can be used simultaneously for ease and flexibility
5. Every set of remote-controlled switches has its special code. More sets can be used in one room without interference
6. Can be used in house stairs, aisle, corridor, bathroom, warehouse, garage, factory, workshop

Package Includes:

1 x 3 Channel RF Wireless ON/OFF Smart Switch with RF Remote Control

Sonoff TH10 Mobile Temperature Switch Timing Thermostat Temperature and Humidity Controller is a Sonoff version smart switch that can monitor and set temperature and humidity through the APP eWeLink. Sonoff TH10 Mobile Temperature Switch Timing Thermostat Temperature and Humidity Controller which can remotely monitor and set temperature and humidity range to turn on/off connected appliances through the iOS/Android APP eWeLink.

 Sonoff TH10 Mobile Temperature Switch Timing Thermostat Temperature and Humidity Controller support presetting the range for temperature or humidity. When the temperature or humidity of your home environment falls within the range, it will automatically turn on or off the connected devices.

Features:

1. Supports tracking device status and remote turn on/off action of connected appliances
2. Supports presetting temperature and humidity to turn on/off
3. Supports 8 enabled countdown/single/repeat  timing tasks
4. Support checking real-time temperature and humidity
5. Support setting smart scene to trigger on/off other smart devices
6. Works with Amazon Echo, Echo Dot, Amazon Tap
7. Works with Google Home, Google Home Mini, Google Nest

Package Includes:

1 x Sonoff TH10 Mobile Temperature Switch Timing Thermostat Temperature and Humidity Controller.

Industrial-grade Ethernet Switches are specifically designed to connect devices in network environments that are subject to extreme operating temperatures of -40°C to 75°C, vibrations, and shocks. They are built to exceed the specifications of commercial switches with industrial safety certification and approval for hazardous locations, making them ideal for use at sites with harsh environmental conditions.

Ethernet switches that feature Industrial Protocol Management support, superior reliability, advanced security, network redundancy, and easy installation and configuration. The IDS Switch portfolio includes support for 10/100/1000 Ethernet and fiber-in unmanaged switches, managed switches, and PoE switches.

Applications: 

Dimensions

Features: 

1. Onboard switch chip, 5x ports 10/100/1000M non-blocking switch architecture
2. Full-duplex 10/100/1000M support for each port (the half-duplex 100M connection is only supported on 10/100M mode)
3. Full/Half-duplex operations with IEEE 802.3x flow control and back pressure support
4. Allow forwarding 9216 bytes huge data packet on linear speed
5. Over-voltage protection, effectively preventing damages caused by other high voltage power supply
6. Industrial grade alloy case, solid and durable, with DIN rail mount support for easy installing

Packages Includes: 

1 x Waveshare Industrial 5P Gigabit Ethernet Switch, Full-Duplex 10/100/1000M, DIN Rail Mount

This is a Sonoff RFR3 Intelligent Switch with the DIY capability that makes it possible to control connected devices via the eWeLink directly from your phone or ask it to turn on/off devices with Alexa and for Google Assistant. The LAN control is designed for situations in which no available WiFi connection, or an unsteady WiFi network environment. Amazingly, the module with unique DIY function, assembly part of it with ordinary appliances to develop the module more compact and intelligent.

Features:

1. Manage devices from your phone, anywhere, and anytime.
2. Support for Alexa & Google Assistant to turn on/off devices.
3. Make one device trigger on/off another one or groups of devices.
4. Control devices with a remote controller with 433MHz

Package Includes:

1 x Sonoff RFR3 Intelligent Switch Supports Alexa Voice Control

Sonoff POW Elite 20Amp is a power meter switch, a newly upgraded ESP32 chip 200% faster than the previous ESP8622 chip.
With an LCD screen, it can track your appliances’ power, current, and voltage in real-time and cumulative power consumption.

POW Elite supports checking 6-Month power consumption historical data accurately to the hour, the data can be exported to excel on your phone. You can set daily/monthly power consumption thresholds when the consumption goal is reached, you will get a push notification.

Supports adding Sonoff devices to Home Assistant for control and automation through the eWeLink add-on. What’s more, to better help you save energy usage, POW Elite joins Alexa Energy Dashboard, you can centrally view the overall or individual device energy consumption in the dashboard. If you subscribe eWeLink Advanced plan, POW Elite is also compatible with IFTTT and eWeLink Web control.

POW Elite with the highest flame-retardant grade V-0 enclosure, upgraded terminal wirings, and more amounts of tin minimize every security risk detail.

Features:

• LCD Screen- Track of power, current, voltage, and cumulative power consumption of your appliances in real-time on the LCD screen.
• 6-Month Consumption History Data by Hour- Power consumption data (accurate to hours) can be kept for up to 6 months which can be exported to excel on your phone
• Overload Protection- You can set power, current, and voltage threshold. Once any condition is met, the POW Elite will be turned off to protect your appliances.
• Fully Functional- POW Elite has all the most basic functions, like App control, voice control, LAN control, timing schedule, inching setting, power on state, etc.

Specifications:

1. POW Elite: 20A
2. Model: POWR320D
3. Wi-Fi: IEEE 802.11 b/g/n 2.4GHz
4. POWR320D Input/Output: 100-240V~50/60Hz 20A Max
5. Casing Material: PC V0
6. Dimensions: 98x54x31mm

Package Includes:

1 x Sonoff POWR320D Elite Smart Power Meter Switch