74HCT151D,653 – 8-input Multiplexer IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x 74HCT151D,653 – 8-input Multiplexer IC SMD-16 Package

TXB0102DCUR – 2-Bit Bidirectional Voltage-Level Shifter Auto Direction Sensing IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x TXB0102DCUR – 2-Bit Bidirectional Voltage-Level Shifter Auto Direction Sensing IC SMD-8 Package

SN74LS74ADR – Dual D-type Pos.-Edge-Triggered Flip-Flop Preset/Clear IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x SN74LS74ADR – Dual D-type Pos.-Edge-Triggered Flip-Flop Preset/Clear IC SMD-14 Package

SN74LV07ADR – Hex Buffer/Driver Open-Drain Output IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x SN74LV07ADR – Hex Buffer/Driver Open-Drain Output IC SMD-14 Package

The NC7SZ125M5X is a single Buffer with three-state output. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65 to 5.5V range. The inputs and output are high impedance above ground when VCC is 0V. Inputs tolerate voltages up to 6V independent of VCC operating voltage. The output tolerates voltages above VCC when in the 3-STATE condition. This product is general usage and suitable for many different applications

Features:

1. Power down high-impedance inputs/outputs
2. Overvoltage tolerance inputs facilitate 5 to 3V translation
3. Proprietary noise/EMI reduction circuitry

Specifications:

1. Input Voltage:1.65~5.5V
2. No. of Pins:5
3. Max Power Dissipation:200 mW
4. Quiescent Current:2 uA
5.  Temperature Range:-40 to 85 Degree Celcius

Package Includes:

1 x NC7SZ125M5X – 5.5V TinyLogic UHS Buffer 3-STATE Output 5-Pin SOT-23 (ON Semiconductor)

The 74HC107D is a dual negative edge triggered JK flip-flop featuring individual J and K inputs, clock (CP) and reset (R) inputs and complementary Q and Q outputs. The reset is an asynchronous active LOW input and operates independently of the clock input. The J and K inputs control the state changes of the flip-flops as described in the mode select function table. The J and K inputs must be stable one set-up time prior to the HIGH-to-LOW clock transition for predictable operation. Inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of V_CC.

Note: for more technical details go through Datasheet in the attachment section 

Features & Specifications:

1. Wide supply voltage range from 2.0 V to 6.0 V
2. CMOS low power dissipation
3. High noise immunity
4. Latch-up performance exceeds 100 mA per JESD 78 Class II Level B
5. Complies with JEDEC standards:
   • JESD8C (2.7 V to 3.6 V)
   • JESD7A (2.0 V to 6.0 V)
6. Input levels:
   • The 74HC107: CMOS levels
   • The 74HCT107: TTL levels
7. ESD protection:
   • HBM JESD22-A114F exceeds 2000 V
   • MM JESD22-A115-A exceeds 200 V
8. Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Package Includes:

1 x 74HC107D