The FLORA is small (1.75″ in diameter, weighing 4.4 grams). The FLORA family also has the best stainless steel threads, sensors, GPS modules, and chainable LED NeoPixels, perfect accessories for the FLORA main board. The FLORA has built-in USB support. Built-in USB means you plug it in to program it, and the modified version of the Arduino IDE so Mac & Windows users can get started fast – or with the new 1.6.4+ Arduino IDE, it takes only a few seconds to add Flora-support. The FLORA has USB HID support, so it can act like a mouse or keyboard to attach directly to computers.

FLORA has a small but easy-to-use onboard reset button to reboot the system. The power supply is designed to be flexible and easy to use. There is an onboard polarized 2 JST battery connector with a protection Schottky diode for use with external battery packs from 3.5v to 16v DC in. Can be used with LiIon/LiPoly, LiFe, alkaline, or rechargeable NiMh/NiCad batteries of any size. The FLORA does not have a LiPo charger included by design, this allows safe use with multiple battery types and reduces the risk of fire as it is not recommended to charge these batteries on fabric.

Features:

1. FLORA is fabric-friendly and beginner-friendly.
2. 4 indicator LEDs and an RGB NeoPixel for even more colorful lighting.
3. Easily drive 50 pixels directly from the onboard power supply or up to 500 pixels with a 5V supply.
4. Can power common 3.3v modules and sensors.
5. Perfect for beginners.

Package Includes:

1 x Adafruit FLORA – Wearable electronic platform: Arduino-compatible – v3

This is hot! Literally! Apply 5-12VDC and the stainless steel fibers in this heating fabric will warm up, creating a little heating pad. On one hand, it’s just a gigantic resistor. On the other hand, it’s flexible, light, and can be wrapped around a project. Originally designed for portable wearable heating pads, this fabric can be used for wearables, weather balloons, DIY-bio projects, thermal cycling for materials testing, etc.

The temperature reached varies with voltage. Note that while the data/spec sheet says 15cm, its more like ~14cm long. Check the spec sheets in the Technical Details tab for a table of voltage/current/temperature outputs. You could PWM it with a power N-channel transistor if you want finer temperature control.

Application:

1. materials testing
2. DIY-bio projects
3. thermal cycling for materials testing
4. weather balloons
5. portable wearable heating pads
6. This fabric can be used for wearables

Features: 

1. Easy to Use
2. Best Product for DIY-bio projects
3. Power Source: 1.Computer USB Slot 2. Power Bank 3. AC to DC Adopter
4. Color as per Image
5. Wire Length: 6(mm)
6. Size: 14 cm x 5 cm
7. Brand – Adafruit
8. Quantity: 1

Packages Includes:

1 x Adafruit Accessories Electric Heating Pad – 14cm x 5cm

Would you like to learn electronics, with an all-in-one board that has sensors and LEDs built in Circuit Playground is here – and it’s the best way to practice programming on real hardware with no soldering or sewing required

This is the Classic version of Circuit Playground, which comes with an ATmega32u4. It’s designed to be used with Arduino IDE and code.org CS Discoveries only. It even comes with Firmata already programmed in, so you can use it immediately with code.org Discoveries without any preparation or updates.

If you would like to use Make Code or Circuit Python, check out Circuit Playground Express, which can be used with Make Code, Circuit Python or Arduino.

Circuit Playground features an ATmega32u4 processor, just like our popular Flora. The board’s also round and has alligator-clip pads around it so you don’t have to solder or sew to make it work. You can power it from USB, a AAA battery pack, or with a Lipoly battery (for advanced users). Just program your code into the board then take it on the go

1. ATmega32u4 Processor, running at 3.3V and 8MHz
2. Micro USB port for programming and debugging with Arduino IDE
3. USB port can act like serial port, keyboard, mouse, joystick or MIDI

Circuit Playground has built-in USB support. Built in USB means you plug it in to program it and it just shows up.  All you really need is a Micro-B data/sync USB cable – not included! With the new 1.6.4+ Arduino IDE, it takes only a few seconds to add support. The Circuit Playground has USB HID support, so it can act like a mouse or keyboard and attach directly to computers.

 Features:

1. Includes I2C, UART, 8 pins that can do analog inputs, multiple PWM output
2. 7 pads can act as capacitive touch inputs and the 1 remaining is a true analog output
3. Green “ON” LED so you know its powered
4. Red “#13” LED for basic blinking
5. Reset button
6. ATSAMD21 ARM Cortex M0 Processor, running at 3.3 V and 48 MHz
7. 2 MB of SPI Flash storage, used primarily with Circuit Python to store code and libraries
8. Micro USB port for programming and debugging
9. USB port can act like serial port, keyboard, mouse, joystick or MIDI

Package Includes:

1 x Adafruit Circuit Playground Classic