Alligator Test Clips Clamp To USB Male Connector Power Supply Adapter Wire 58cm Cable Red And Black

SKU: 1031040
In Stock

62.00

  1. Cable length: 58 cm
  2. One connector crocodile test clip
  3.  Interface: USB male
  4. Color: red and black
In Stock
Add to Wishlist
Add to Wishlist

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist

Description

This is the Red And Black Alligator Test Clips Clamp To USB Male Connector Power Supply Adapter Wire 58cm Cable. It consists of insulation-covered clips connected to the wire on one end and a USB male connector on the other.

It comes in handy when doing electrical or laboratory testing. In school physics labs, alligator clips are frequently used to quickly and cheaply assemble circuits. They’re great for connecting wires to components.

Alligator clips can also be used to hold parts together as miniature clamps. It can also be used to join wires and glue them together for soldering. Installation is simple, and the insulation red soft plastic insulator is safe to use.


Features:

  1. Type: Alligator Test Clips Clamp To USB Male Connector
  2. Color-coded insulated leads make it possible to test circuits without crossing wires or causing shorts.
  3. With the color-coded insulation plastic cover on clips, installation is simple and safe.

Package Includes:

1 x Alligator Test Clips Clamp To USB Male Connector Power Supply Adapter Wire 58cm Cable Red And Black

Additional information

Interface

USB Male

Color

Red and Black

Wire Length(mm)

580

Quick Comparison

SettingsAlligator Test Clips Clamp To USB Male Connector Power Supply Adapter Wire 58cm Cable Red And Black removetype c to balance head charging cable removeBattery Charger 4S LiFePO4 -14.5V 1A with DC Plug removeWaveshare USB to CAN Adapter Dual-Channel CAN Analyzer Industrial Isolation removeBlack DC5.5 mm Male to Female Plug Extension with ON-OFF Switch. removeStandard 24V 2A 48W Power Supply with 5.5mm DC Plug remove
NameAlligator Test Clips Clamp To USB Male Connector Power Supply Adapter Wire 58cm Cable Red And Black removetype c to balance head charging cable removeBattery Charger 4S LiFePO4 -14.5V 1A with DC Plug removeWaveshare USB to CAN Adapter Dual-Channel CAN Analyzer Industrial Isolation removeBlack DC5.5 mm Male to Female Plug Extension with ON-OFF Switch. removeStandard 24V 2A 48W Power Supply with 5.5mm DC Plug remove
Image
SKU10310401119249112932913678091308028838935
Rating
Price62.00509.00599.009,449.0071.00432.00
Stock
In Stock
In Stock
Out of stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockOut of stockIn StockIn StockIn Stock
Add to cart

Add to cart

Add to cart

Read more

Add to cart

Add to cart

Add to cart

Description
  1. Cable length: 58 cm
  2. One connector crocodile test clip
  3.  Interface: USB male
  4. Color: red and black
  1. Model: Type-C to balance plug
  2. Product Weight: 5.5g
  3. Support: 4S-6S
  4. Output: 5V/3A
  5. Input Connector: XH2.54
  6. Output connector: Type-C
  7. Length: 110mm
  1. Input: AC100-240V 50/60Hz
  2. Output: DC14.5V 500mA
  3. Applicable models: universal
  4. Size: Approx. 8*6*6cm/3.15*2.36*2.36in
  5. DC Output Head: 5.5*2.1/2.5mm
  1. Brand: Waveshare
  2. Product: USB to CAN Adapter, Dual-Channel CAN Analyzer
  3. Transfer speed: The receiving and sending of each CAN channel can reach: 8500 frames/s
  4. Operating voltage: 5V
  5. Baud Rate: 10Kbps~1Mbps
  1. Type: Male 5.5 to Female 5.5  DC jack
  2. Length: 30cm
  3. Colour: Black
  4. Easy plug and Play Operation
  1. Input Voltage: 100-260VAC, 50Hz
  2. Output: 24V 2A
  3. Plug Type: Indian three Pin
  4. Adapter Output Plug size: 5.5mm
  5. Overall Lenght with Cable: 2.75 Meter
Content

This is the Red And Black Alligator Test Clips Clamp To USB Male Connector Power Supply Adapter Wire 58cm Cable. It consists of insulation-covered clips connected to the wire on one end and a USB male connector on the other.

It comes in handy when doing electrical or laboratory testing. In school physics labs, alligator clips are frequently used to quickly and cheaply assemble circuits. They’re great for connecting wires to components.

Alligator clips can also be used to hold parts together as miniature clamps. It can also be used to join wires and glue them together for soldering. Installation is simple, and the insulation red soft plastic insulator is safe to use.


Features:

  1. Type: Alligator Test Clips Clamp To USB Male Connector
  2. Color-coded insulated leads make it possible to test circuits without crossing wires or causing shorts.
  3. With the color-coded insulation plastic cover on clips, installation is simple and safe.

Package Includes:

1 x Alligator Test Clips Clamp To USB Male Connector Power Supply Adapter Wire 58cm Cable Red And Black

Charge your GoPro hero with your LiPo battery! Use this Type C to Balance head charging cable to make your GoPro compatible with the balance style power connector


Features: 

  1. Compatible with all USB Type-C powered hardware or cameras (GoPro Hero 5/6/7/8/9, Insta360, etc.)
  2. Stable power supply from any LiPo (4S-6S input)
  3. High power output (up to 5V/3A)

Package Includes :

1 x Type C to Balance head charging cable

The brand new multipurpose 14.5V 1A Power supply series adapter is Robu’s own product. To provide the best possible quality, we at Robulabs tested many adapters from various manufacturers and tied them up with the best one of them and hence to assure that quality and durability we are providing a 15-days manufacturing defect warranty to our product.

This 14.5V 1A Power Supply with 5.5mm DC Plug Adapter is 2 pin EU plug type adapter and 1.1 meters long connecting cable. These adapters are designed to meet all types of power requirements of tablet pc, notebooks, and other electronic gadgets.

This adapter is compatible to handle up to 2A current so applications like toy cars, CCTV Cameras, Routers, Modems, Cordless Phones, Set-Top Boxes, Wireless Devices, and POS Machines are compatible with this adapter.

we have a variety of adapters to find more click here!


Features: 

1. Adopt high efficiency, low loss, energy saving, environmental protection circuit design. With over-voltage, over current, overload, short circuit protection.
2. The product is beautiful and generous. The outer casing is made of high-temperature-resistant flame-retardant material. It is ultrasonically welded and safe and reliable.
3. The output interference is very small and the output voltage is stable. Can better extend the service life of external electrical appliances.
4. Powerful power, good anti-interference performance, small DC ripple.
5. The has a low operating temperature and a long service lifetime. It is moisture-proof and dust-proof.


Specification:

  1. Input: AC100-240V 50/60Hz
  2. Output: DC14.5V 500mA
  3. Applicable models: universal
  4. Size: Approx. 8*6*6cm/3.15*2.36*2.36in
  5. DC Output Head: 5.5*2.1/2.5mm

Package Includes :

1 x Battery Charger 4S LiFePO4 -14.5V 1A with DC Plug

USB To CAN Adapter, Dual-Channel CAN Analyzer, Industrial Isolation. Adopt High-Speed USB2.0 Interface, Compatible With USB 1.1 And USB 3.0 Dual CAN Bus Interfaces Support Two-Way Transmission, Can Work Independently Without Affecting Each Other CAN Baud Rate Is Configurable In The Range Of 10Kbps-1Mbps Supports Baud Rate Calculation, Auto-Detection, And Setting Via The Configuration Tool. Support CAN 2.0A, CAN 2.0B, CANOpen, SAE1939, DeviceNet, ICAN, ISO 15765 Protocols . Provide examples for secondary development projects on various mainstream development platforms: C++Builder, C#, VC, VB, VB.NET, Delphi, LabVIEW, LabWindows/CVI, Q, Matlab, Python/Python-can, Qt samples under Linux


Useful link:

To do the Hardware setup, please follow this tutorial.
To do the Software setup, please follow this tutorial.


Features:

  1. Compact in size and easy to use,
  2. Integrating dual independent channels with electrical isolation and multiple protection circuits
  3. Supports Windows and Linux systems, and comes with drivers
  4. It can be connected to the PC or industrial control host via a USB port to realize transceiver control,

Package Includes:

1 x USB-CAN-B

2 x Car OBD adapter

1 x USB type A plug to type B plug cable

1 x 4pin cable

1 x Screwdriver

This DC5.5 mm Male to Female Plug Extension with ON-OFF Switch can provide you ease to the ON-OFF power supply on your project desk while connecting to the power adapter. If you frequently need to ON-OFF your application then you must have this  30cm long extension which comes with a Male 5.5 DC jack at one end and a Female 5.5DC jack at the other.


Features and Specification 

  1. Type: Male 5.5 to Female 5.5  DC jack
  2. Length: 30cm
  3. Colour: Black
  4. Easy plug and Play Operation

Package Includes:

1 x Black DC5.5 mm Male to Female Plug Extension with ON-OFF Switch.

Standard DC 24V 2A 48W Output Power Adapter with AC 100-260V Input range. It is widely used for LED Driver and as a Switched-mode power supply (SMPS) for various devices which required 24V with a high current of up to 2A. This is an advanced power supply and better than conventional ones. If you want low losses and stable output also you don’t want to make a rectifier, so go for this Standard SMPS.

This is a high-quality AC to DC Switching Power Adapter which gives a clean regulated 24 VDC output at up to 2A. These adapter work with 260/220VAC input, allowing them to work with household supply. The barrel plug attached to these wall adapters is center positive with a 2.1mm diameter.

The Standard AC 100~260V to DC 24V 2A Power Adapter/Buck Converter/Switching Power Supply/Transformer/Charger, Applied to the Charging Equipment/Small table lamp/Router/TV Box/Mini TV, etc/tablet PC/ 2.5-inch mobile hard disk/mobile DVD/Power Tools, etc.


Features :

  1. PWM design, make sure the stability and high efficiency of power supply.
  2. Anti-jamming, passed EMC test, wave less than 20MV.
  3. Efficiency above 80%, exotherm less than 25 degree
  4. Function: with overvoltage protection, short-circuit protection, overload protection
  5. Non-waterproof
  6. Constant voltage output assumes a stable power supply for LED lightings to reach a long lifetime and reduce led to light decay.

Package Includes :

1 x Standard AC 100-260V to DC 24V 2A 48W Power Adapter.

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Interface

USB Male

Color

Red and Black

Wire Length(mm)

580

Model

Type-C to balance plug

Compatible LiPO Batteries

4S ~ 6S

Output

5V/3A

Input Connector

XH2.54

Output Connector

Type-C

Operating Voltage

5V

Protection

Power and signal fully isolation, 2500V DC isolation, ±8KV electrostatic discharge

CAN channel

Dual-channel CAN1 and CAN2 (independent and isolated)

Connector

CAN bus screw terminal

Baud Rate

10Kbps~1Mbps

Protocol Support

CAN2.0A, CAN2.0B, CANOpen, SAE J1939, DeviceNet, iCAN, ISO 15765 protocol

Hardware Support

Single-wire CAN, High-speed CAN, Low-speed/Fault-tolerant CAN

Transfer speed

The receiving and sending of each CAN channel can reach: 8500 frames/s

Output Plug Size (mm)

5.5mm (Outer Dia) x 2.5mm(Inner Dia.)

Input Voltage (V AC)

100 ~ 260

Output Voltage(V)

24

Max. Output Current (A)

2

Output Power(Watt)

48

Ripple wave (mVp-p)

<1%

Linear Modulate

0.5%max

Temperature Coefficient

0.02%

Start Time(s)

1

Guard Time(ms)

20

Override Protection

115%-150%kvA

Overvoltage Protection

30%-150% VAC

Short-Circuit Protection

1 Channel Automatic Recovery

Operating Temperature (°C)

0 to 40

Store Temperature (°C)

-20 – +85

Output Adapter Type (mm)

5.5 x 2.5

Power Cord Length (Meter)

1.5

Dimensions in mm (LxWxH)

105 x 45 x 30

Weight (gm)

220

Overall length with Cable

2.75 Meter