When you want to measure the AC current, are you still having trouble cutting the wires, wiring, or soldering? Gravity: Analog AC Current Sensor comes to the rescue, eliminating the need to cut wires or reconnect circuits. Simply clamp the AC transformer probe on the AC line, and then plug the 3.5mm headphone jack into the signal conversion module to read the current AC current value. The analog output is designed to be compatible with the 3V3/5V micro-controller. It can be conveniently used for AC current measurement to monitor AC motors, lighting equipment, air compressors, etc.

Applications:

Features:

1. Non-contact measurement, high safety
2. Multiple ranges for various measurement scenarios
3. Compatible with 3V3/5V micro-controller

SPECIFICATION

AC Current Signal Conversion Module:

1. Input Voltage (VCC): 3.3V-5.5V
2. Interface: Gravity Analog (PH2.0-3P，analog voltage output 0.2-2.8V DC)
3. AC Voltage Input Range: 0-1V (AC RMS)
4. Relative Error: ±4%
5. Dimension: 32×27 mm /1.26×1.06 in
6. Weight: 5g

Open Type AC Transformer Probe:

1. AC Current Range: 0-20A
2. Signal Output (standard Φ3.5mm 3P plug): 0-1V AC voltage, linear corresponding range 0-20A
3. Accuracy: ±1%
4. Non-linearity: ≤±0.2%
5. Frequency Range: 50Hz~1kHz
6. Cable Length: 1m
7. Working Temperature: -25 ℃~+70 ℃
8. Opening Size: 13×13 mm / 0.51×0.51 in
9. Weight: 50g

Useful Links:

Package Includes:

This is a  0-5V to 4-20MA Voltage-to-Current Module. The module is used to convert Voltage into Current.so, In the process of circuit signal transmission, the voltage signal will increase with the transmission distance becoming weak, the use of current transmission can avoid the signal weakening. This module is used for the end of the current signal transmission, the signal into a voltage signal for single-chip detection. Current Input support 4-20Ma, 0-20mA, voltage output support 0-3.3V 0-5V 0-10V.

Features and Specifications:

1. power supply: DC 7-30 V
2.  Input Voltage: 0-10V
3.  Output current: 4-20mA
4.  drifting temperature: +/- 100ppm / ℃
5.  Ambient temperature: -10 ℃ ~ 60 ℃
6.  Storage temperature: -20 ℃ ~ 85 ℃
7.  Relative Humidity: 10-90% RH
8.  air pressure: 86-106Kpa
9. Wide supply voltage range, the output has multiple voltage ranges
10. Zero and range can be adjusted
11. High stability, good linearity, industrial grade
12. Current signal sampling resistor with high precision color ring resistance, high precision, temperature drift small, high power

Package Includes:

1 x  0-5V to 4-20MA Voltage-to-Current Module

YHDC Split Core Current Transformer SCT006 Rated Input 1A/ Rated Output 1mA.  built-in TVs.  Purpose: Applicable for the current measuring monitoring and protection of AC motor, lighting equipment, and air compressor.

They operate by magnetically inducing current from the conductor they are placed on into a proportional electric current that flows through the CT conductors. They make it possible for power meters to measure current on circuits that, if they measured the current directly, would overpower the meters

Features:

1. Energy saving
2. Internal heating structure.
3. low power consumption and high efficiency.
4.  The shell is made of aluminum alloy, which has good corrosion resistance and long service life

Package Includes:

1 x YHDC SCT006 1A 1mA Split core current transformer

FrSky New FAS100 Advance Smart Port and FBUS 100A Capable Current Sensor For RC Radio Control Model. FrSky ADVANCE (ADV) series has comprehensive sensor types and enhanced the original sensor line’s performance and capability. All ADV sensors fully support FBUS protocol and are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with the FBUS-capable receiver, further simplifying the build setup. The FAS100 ADV current sensor can be used to measure current (maximum 100A) and voltage (up to 14S) when connected between a battery and ESC

Features: 

1. ADV sensors fully support FBUS protocol
2. S.Port compatible
3. Compatible Receivers with FrSky Smart Port & FBUS function

Package Includes:

1 x FrSky FAS100 ADV Smart Port and FBUS 100A Capable Current Sensor

YHDC Split Core Current Transformer SCT006 Rated Input 5A/ Rated Output 2.5mA.  built-in TVs.  Purpose: Applicable for the current measuring monitoring and protection of AC motor, lighting equipment, and air compressor.

They operate by magnetically inducing current from the conductor they are placed on into a proportional electric current that flows through the CT conductors. They make it possible for power meters to measure current on circuits that, if they measured the current directly, would overpower the meters

Features:

1. Energy saving
2. Internal heating structure.
3. low power consumption and high efficiency.
4.  The shell is made of aluminum alloy, which has good corrosion resistance and long service life.

Specifications:

1. Input current: 5A
2. Output current: 2.5mA
3. Diameter : 6mm
4. Mounting type: suspension
5. Coil Structure: Toroidal
6. Coil Number: 800 turns
7. Product weeight: 19
8. Dimensions: 16.90 x 29.80 mm

Package include:

1 X AC Current sensor split core current transformer SCT006

YHDC SCT006 5A: 10mA Split Core Current Transformer is compatible with foreign products completely, built-in TVs.  Purpose: Applicable for the current measuring monitoring and protection of AC motor, lighting equipment, and air compressor.

Specifications: 

1. Material of core: Ferrite
2. Working voltage: Phase voltage≤720V
3. Working temperature: -25℃～+60℃
4. Storage temperature: -30℃～+90℃
5. Frequency range: 50Hz～1KHz
6. Input: Bare conductor
7. Cable Length: 30 cm
8. Output 5A: 10mA
9. Aperture: 6mm
10. Dimensions (L x W x H) mm: 18 x 20 x 30
11. Weight: 16g

Package Includes:

1 x YHDC SCT006 5A: 10mA Split Core Current Transformer