Package Includes:

Adafruit WCH CH9102F Friend – USB to Serial Converter, Long gone are the days of parallel ports and serial ports. Now the USB port reigns supreme! But USB is hard, and you just want to transfer your everyday serial data from a microcontroller to computer. What now? Enter the Adafruit CH9102F Friend, a version of our popular USB-Serial ‘friend’ breakouts that uses the affordable (and available) CH9102F – a ‘near pin-compatible’ to the CP2102N.

This board features the CH9102F USB-Serial chip that can upload code at  3Mbit/s for fast development time. It also has auto-reset for Arduino/ATmega328 boards so no noodling with pins and reset button pressings. The CH9102F has fairly good driver support, and for 99% of use cases is a fine replacement of the FTR232, FT231x or CP210x series. With a modern USB Type C connector, it’s ready to rock on any kind of computer

Features:

1. Board features the CH9102F USB-Serial chip that can upload code at  3Mbit/s for fast development time
2. It also has auto-reset for Arduino/ATmega328 boards so no noodling with pins and reset button pressings.
3. Works excellently with any Arduino, ESP8266, ESP32, or any other microcontroller that uses an ‘FTDI port’ for communications and upload

Package Includes:

1 x Adafruit WCH CH9102F Friend – USB to Serial Converter

Converter for connecting the Lidar TFmini / TF02 / TF03 distance sensor with a TTL/CAN communication interface to a PC with a USB port in order to check the parameters/data via the Benewake Windows Display Program with graphic interface. A USB miniUSB cable is also included.

Note: For more technical details go through Datasheet in the attachment sections

Features:

1. Blind Zone: 10cm
2. Distance resolution: 1cm
3. Accuracy: ±10cm (within10m) ，1% (beyond 10m)

Package Includes:

1 x TTL / CAN to USB converter for TF LiDAR

Industrial USB TO RS485 Bidirectional Converter, Onboard Original CH343G, Multi-Protection Circuits And SP485EEN Chips, Providing Better Stability And Compatibility, Built-In Lightningproof Tube, Resettable Fuse, ESD And TVS Protection Circuits, Etc.

The USB Signal Can Be Converted Into A Balanced Differential RS485 Signal And The Transmission Rate Is Stable. The Reliable Speed Is 300bps ~ 3Mbps, The Transmission Distance Is About 1.2km For RS485 And About 5 Meters For USB.CH343G is a USB bus adapter chip, which can convert USB to a high-speed asynchronous serial port, supports automatic identification and dynamic self-adaptation of communication baud rate of 115200bps and below, and provides commonly-used MODEM contact signals to expand asynchronous serial ports for computers. It can upgrade a common serial device or MCU directly to a USB bus.

Features:

1. Support USB to RS485 bidirectional conversion
2. Fast communication, stable and reliable, better compatibility
3. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightning proof & anti-electrostatic
4. Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance
5. 3 LEDs for indicating the power and transceiver status

Package Includes:

1 x USB TO RS485 (B)

1 x USB-A male to female cable

1 x Screwdriver

FT232RL/CH343G USB TO RS232/485/TTL Interface Converter, Industrial Isolation. Onboard unibody power supply isolation, provides stable isolated voltage and needs no extra power supply for the isolated terminal. unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, and low power consumption.

Onboard TVS (Transient Voltage Suppressor), effectively suppresses surge voltage and transient spike voltage in the circuit, lightning proof & ESD protection. Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provide over-current/over-voltage proof, and improve shock resistance.

Features:

1. A fully automatic transceiver circuit with no delay ensures the USB port communicates with different interfaces fastly and stably, without interfering with each other
2. Onboard TTL serial 3.3V/5V voltage translator, config the TTL level via switch
3. Aluminum alloy enclosure with sandblasting and anodic oxidation, CNC process opening, solid and durable
4. 3 LEDs for indicating the power and transceiver status
5. High-quality USB-B and RS232 connectors, smoothly plug/pull

Package Includes:

1 x CH343G USB TO RS232/485/TTL Interface Converter, Industrial Isolation

1 x USB Cable

Industrial Grade Multifunctional USB HUB, Extending 3x USB Ports + 100M Ethernet Port

Features:

1. 3x extended USB ports, compatible with USB 2.0 / 1.1
2. Onboard RTL8152B Ethernet chip, adapting RJ45 network port, 10/100M adaptive
3. Industrial grade HUB chip, adopting STT technology, allows stable and smooth concurrent USB connections
4. ESD protection for each USB port, preventing electric surge damage and data loss
5. Onboard large-capacity electrolytic capacitor, effectively making the power supply output of the USB port more stable
6. Over-voltage protection, effectively preventing other high-voltage power inputs from damaging the connected devices
7. Multiple protection circuits: over-voltage, over-current, short circuit, over-temperature, reverse current, under voltage lock-out, 8KV ESD protection, filtering protection, etc.
8. LED indicators for monitoring operating statuses of power supply, network port, and USB ports
9. Industrial grade metal case, rugged & durable, with mounting holes for easy installation

Specifications:

1. USB Port USB 2.0 Port x 3, theoretically up to 480Mbps
2. Networking: 10/100 adaptive
3. USB hub Input: operating voltage: 5V
4. Connector: USB-B
5. USB Output Operating Voltage: 5V@Imax:1.2A①
6. Connector: USB-A
7. External Power: power supply voltage DC 5V②
8. connector: DC jack
9. Operating Environment: -40℃ ~ 85℃
10. OS Support: Mac OS (8.6 or above), Linux(2.4.20 or above), Windows 11 / 10 / 8.1 / 8 / 7 / XP

Package Includes:

1 x Waveshare Industrial Grade Multifunctional USB HUB, Extending 3x USB ports + 100M Ethernet Port