The ERM Coin Vibration Motor has the highest vibration force of all ERM coin vibration motors in the market. It has the biggest diameter and thickness of all coin vibration motors as well. This motor has a adhesive double tape which can be used to permanently fixed PCB or wall of your product’s housing. We can add many kinds of connectors to its wire ends. Custom lead wire lengths are also available.

Features:

1. Small Compact Size
2. Metal Body
3. Power: 2.2V
4. Speed 10000RPM
5. Powerful Motor

Specifications:

1. Operating voltage: 2.2-3.3 V
2. Starting Voltage: 1.8 Max
3. Rated Current: 75.0 Max
4. Rated RPM: 10,000 Min
5. Rated Vol.: 3.0 V DC
6. Diameter: 12mm
7. Width: 3.4mm

Package Includes:

1 x ERM Coin Vibration Motor

The brushless DC motor mainly consists of a rotor made of permanent magnet material and a stator with a coil winding. It has a lot in common with the DC motor, the stator and rotor structure is almost the same (the original stator into rotor, rotor into stator), and the winding wiring is basically the same.

However, there is one obvious structural difference: brushless DC motors do not have commutators and brushes as in DC motors. Instead, they use a position sensor. A Brushless DC motor cannot automatically commutate (phase).

Features:

1. Longer life
2. total lifetime 500,000
3. IC drivers are embedded inside.
4. It has no interference to the user’s PCB circuit.

Specifications:

1. Operating Voltage: 2.7-3.3 VDC
2. Starting Voltage: 2.5 Max
3. Starting Current: 175 Max
4. Rated Current: 80 mA Max
5. Rated RPM.: 15,000±3,000
6. Rated Vol.: 3.0 VDC
7. Diameter: 6.0
8. Width: 2.5

Package Includes:

1 x BLDC Coin vibration motor ,6 mm Dia.,2.5mm width

The 0834 series eccentric motor vibration force is stronger than the 0827 series motor, however, shares the same price. Each type of motor can provide various ways of contact for you to choose from. We can provide you with wire type, connector type, FPC type, etc.

Features:

1. Small Compact Size
2. Metal Body
3. Power: 2.5V
4. Speed 9000 RPM
5. Powerful Motor

Specifications:

1. Operating Voltage: 2.5-3.3 V DC
2. Starting Voltage: 2.3 Max V DC
3. Starting Current: 190 Max
4. Rated Current: 80 Max mA
5. Rated RPM.: 9000
6. Rated Vol.: 3.0 V DC
7. Width: 3.4mm
8. Diameter: 8.0mm

Package Includes:

1 x ERM Coin Vibration Motor

Grove – Haptic motor is a Grove module integrated with DRV2605L which will give your project more feelings. This motor is specially designed for various effects, such as to ramp the vibration level up and down, for wearable and IoT devices. Right we have developed an easy-to-use library that can simulate 123 kinds of vibrating modes in total and this will make your prototyping very quickly. Also, you can develop more advanced functions with the driver DRV2605L which improves actuator performance in terms of acceleration consistency, starting time, and brake time and is accessible through a shared I2C compatible bus or PWM input signal.

Getting Started With Seeed Studio Grove Haptic Motor

Features: 

1. More vibration effects.
2. Facilitate the process of prototyping.
3. Easy-to-use library with 123 kinds of vibrating modes.
4. Powerful driver to implant more advanced functions.

Application:

1. Mobile phones and tablets.
2. Wearable devices.
3. Remote controls, touch-enabled devices.
4. Industrial human-machine interfaces.

Package Includes:

1 x Grove Haptic Motor

This 7mm electric waterproof motor essentially consists of an eccentric rotating mass vibration motor, housed in a metal casing. It belongs to our encapsulated series vibration motor. Encapsulated vibration motors are designed to be over molded with low temperature/pressure plastics to make them fully watertight, or seal them for use in harsh (e.g. corrosive) environments. They essentially consist of an eccentric rotating mass vibration motor, housed in either a plastic or metal casing. All our encapsulated vibration motors are based on a coreless design.

Features:

1. Best Electrical performance
2. High Product Performance
3. Low noise High efficiency
4. Long lifespan

Specifications:

1. Operating Voltage: 1.0-4.0 V DC
2. Starting Voltage: ≤1.0 V DC
3. Stall Current: ≤150 mA
4. Starting Current: ≤130 mA
5. Rated Current: 70 mA Max
6. Rated Speed: 8,000±2,000 rpm
7. Rated Voltage: 3.0 VDC
8. Overall Length: 22.05
9. Length of motor body: 16.6
10. Diameter: 7.0

Package Includes:

1 x Encapsulated vibration motor

The coin ERM type vibration motor is very popular in the wearables field. Since the coin motor is the thinnest motor in the world, and the thinnest we can do is 2.0mm, which is suitable for a thin and light smartwatch. You can click on 7-12mm flat motor for selection. These coin motors could be of different sizes and different contact modes for your choice.

Such as many kinds of connectors, spring contacts, and FPC. We can design a customized FPC for your application. If your device requires it, a sponge with different thicknesses or double adhesive tape also can be added.

Features:

1. Small Compact Size
2. Metal Body
3. volt: 2.5V
4. Speed 9000 RPM
5. Powerful Motor

Specifications:

1. Operating voltage: 2.5-3.3 VDC
2. Starting Voltage: 2.3 mAx
3. Starting Current: 190 Max
4. Rated Current: 80.0 Max
5. Rated RPM.: 9000 Min
6. Rated Voltage.: 3.0 V DC
7. Diameter: 8.0mm
8. Width: 2 mm

Package Includes:

1 x ERM Coin Vibration Motor