FrSky Taranis X9D Plus 2019 Digital Telemetry Drone Remote Control with R9M 2019 Module and R9MX Receiver- (Silver Colour)

SKU: 1060509
In Stock

24,205.00

  1. Compatibility: ACCST D16 and ACCESS receivers Communication Protocol:ACCST D16 /ACCESS Feel Free to Choose
  2. Classic Taranis form factor design Easy launch momentary button
  3. Program navigation button High-speed module digital interface
  4. Installed with ACCESS protocol Supports spectrum analyzer function
  5. Supports SWR indicator warning G9D potentiometer gimbal Supports wired training function
In Stock
Add to Wishlist
Add to Wishlist

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist

Description

The FrSky Taranis X9D Plus 2019 is a re-designed version with additions like an additional momentary button placed on the top left shoulder making it ergonomically friendly for DLG pilots to activate launch mode and features a program scroll wheel making it even easier to navigate the menus.
The upgraded MCU is used in conjunction with a re-designed mainboard that further increases the computing capability and increases data storage. The upgrades not only improve the running of LUA scripts but also optimize overall performance like voice speech outputs.
The 2019 version uses the latest ACCESS communication protocol, it boasts 24 channels with a faster baud rate and lower latency with a high-speed module digital interface. Along with the new spectrum analysis function added to the OpenTX firmware, it is now possible to check the airwaves for RF noise. This version will give you a further improved experience based on the classic Taranis remote control. Additionally, tons of extra upcoming features that ACCESS brings will make this an ideal transmitter for any skill level.

Note: Due to Air shipping limitations, this Radio System does not come with the 2S battery needed for it. you have to buy it separately.

The Input power/battery Requirement for this Remote control system is as below. 
  1. Allowed battery: Only 2S Li-ion/Lipo (LiFePo4 is not supported)
  2. Battery compartment Size: 100 x 30 x 26.5 mm (L x W  x H)
  3. Recommended battery Pack size: 80 x 30 x 24mm (L x W x H)
  4. 5V 2A Mini USB input port.

Features:

  1. Classic Taranis form factor design
  2. Easy launch momentary button
  3. Program navigation button
  4. High-speed module digital interface
  5. Installed with ACCESS protocol
  6. Supports spectrum analyzer function
  7. Supports SWR indicator warning
  8. G9D potentiometer gimbal
  9. Haptic vibration alerts and voice speech outputs
  10. Supports wired training function
  11. Menu navigation scroll wheel button
  12. Tactile vibration alert and voice playback
  13. Support wired coach function
  14. PARA wireless trainer system
  15. High-speed and low-latency coaching system
  16. Can wirelessly match FreeLink App and AirLink S module equipment to use
  17. Support 2S lithium battery balance charging function (Mini USB charging interface)
  18. Built-in RF module: ISRM-S-X9
  19. Smart port Micro SD memory card slot, Mini USB charging port, and DSC trainer port
  20. Model storage quantity: 60 groups (expandable through MicroSD card)
  21. Compatible: ACCST D16 and ACCESS series receivers


Useful Link:

FrSky FrSky Taranis X9D Plus 2019 Downloads Page


Package Includes:

1 x Taranis X9D 2019 Edition Radio System

1 x R9MX Receiver

1 x  Neck Strap and  Neck Strap Adapter

1 x USB type A to Mini USB Cable (50 cm)

1 x User Manual

Additional information

Model

FrSky TARANIS X9D Plus 2019

Operating System

OpenTX

No. of Channels

24

Operating Voltage (VDC)

6.5 ~ 8.4

Current Consumption (mA)

130@8.2V

Operating Temperature Range (°C)

-10 to 55

Display Resolution

212 x 64

Available Ports

Smart Port, Micro SD card slot, and DSC Port

Color

silver

Length (mm)

200

Width (mm)

170

Height (mm)

70

Weight (gm)

656

Quick Comparison

SettingsFrSky Taranis X9D Plus 2019 Digital Telemetry Drone Remote Control with R9M 2019 Module and R9MX Receiver- (Silver Colour) removeFlysky FS2A 4CH Receiver removeRadiomaster TX16S MKII HALL V4.0 ELRS Radio with RP1 ExpressLRS 2.4ghz Nano Receiver removeFrSky Tandem X20S ACCESS 900M/2.4GHz Radio Transmitter with TDR6 Receiver removeRadiolink R9DS receiver removeRadiomaster TX12 MKII ExpressLRS EdgeTX Transmitter with RP1 ExpressLRS 2.4ghz Nano Receiver remove
NameFrSky Taranis X9D Plus 2019 Digital Telemetry Drone Remote Control with R9M 2019 Module and R9MX Receiver- (Silver Colour) removeFlysky FS2A 4CH Receiver removeRadiomaster TX16S MKII HALL V4.0 ELRS Radio with RP1 ExpressLRS 2.4ghz Nano Receiver removeFrSky Tandem X20S ACCESS 900M/2.4GHz Radio Transmitter with TDR6 Receiver removeRadiolink R9DS receiver removeRadiomaster TX12 MKII ExpressLRS EdgeTX Transmitter with RP1 ExpressLRS 2.4ghz Nano Receiver remove
Image
SKU106050912854541352793143542413740611352792
Rating
Price24,205.00949.0022,690.0047,870.001,520.0012,190.00
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  1. Compatibility: ACCST D16 and ACCESS receivers Communication Protocol:ACCST D16 /ACCESS Feel Free to Choose
  2. Classic Taranis form factor design Easy launch momentary button
  3. Program navigation button High-speed module digital interface
  4. Installed with ACCESS protocol Supports spectrum analyzer function
  5. Supports SWR indicator warning G9D potentiometer gimbal Supports wired training function
  1. Product: Flysky FS2A 4CH Receiver
  2. Channels: 4CH
  3. Output signal: PWM
  4. Frequency range: 2.408-2.475GHZ
  5. Band width: 135
  1. Transmission frequency: 2.400GHz-2.480GHz
  2. Antenna gain: 2db (transmit power adjustable)
  3. Working current: 400mA
  4. Working voltage: 6.6-8.4v DC
  5. Remote control distance:> 2km @ 22dbm
  6. Radio firmware: EdgeTX
  1. Operating Voltage Range: 6.5 ~ 8.4V (2S Li-battery)
  2. Operating Current: 240mA@7.4V (typ.)
  3. Default Operating Mode: Mode 2 (Left-Hand Throttle).
  4. All CNC High-Precision Hall-Sensor Gimbals
  5. Built-in Audio Wireless Module
  6. Built-in 6-axis Gyroscope Sensor
  7. Built-in TD 900M/2.4G Dual-Band Internal RF Module
  8. Supports Multiple Working Modes
  9. Supports Recharge System for 2S Li-ion Battery (USB Type-C Interface)
  10. High-speed PARA Wireless Training System (Compatible with FreeLink App3.0)
  11. ETHOS: The more powerful, Flexible and Intuitive OS for your radio.
  1. Brand: RadioLink
  2. Model: R9DS
  3. Operating Voltage: 3.6-12V
  4. Operating Current: 38-45mA@5V.
  5. Frequency: 2.4GHz
  1. Item: TX12 Mark II Radio
  2. Frequency: 2.400GHZ-2.480GHZ
  3. RF Chip: ExpressLRS (ELRS) / CC2500
  4. Working Current: 320mA@8.4V (ELRS) / 180mA@8.4V (CC2500)
  5. Voltage Range: 6.6-8.4v DC
Content
The FrSky Taranis X9D Plus 2019 is a re-designed version with additions like an additional momentary button placed on the top left shoulder making it ergonomically friendly for DLG pilots to activate launch mode and features a program scroll wheel making it even easier to navigate the menus.
The upgraded MCU is used in conjunction with a re-designed mainboard that further increases the computing capability and increases data storage. The upgrades not only improve the running of LUA scripts but also optimize overall performance like voice speech outputs.
The 2019 version uses the latest ACCESS communication protocol, it boasts 24 channels with a faster baud rate and lower latency with a high-speed module digital interface. Along with the new spectrum analysis function added to the OpenTX firmware, it is now possible to check the airwaves for RF noise. This version will give you a further improved experience based on the classic Taranis remote control. Additionally, tons of extra upcoming features that ACCESS brings will make this an ideal transmitter for any skill level.
Note: Due to Air shipping limitations, this Radio System does not come with the 2S battery needed for it. you have to buy it separately.

The Input power/battery Requirement for this Remote control system is as below. 
  1. Allowed battery: Only 2S Li-ion/Lipo (LiFePo4 is not supported)
  2. Battery compartment Size: 100 x 30 x 26.5 mm (L x W  x H)
  3. Recommended battery Pack size: 80 x 30 x 24mm (L x W x H)
  4. 5V 2A Mini USB input port.

Features:

  1. Classic Taranis form factor design
  2. Easy launch momentary button
  3. Program navigation button
  4. High-speed module digital interface
  5. Installed with ACCESS protocol
  6. Supports spectrum analyzer function
  7. Supports SWR indicator warning
  8. G9D potentiometer gimbal
  9. Haptic vibration alerts and voice speech outputs
  10. Supports wired training function
  11. Menu navigation scroll wheel button
  12. Tactile vibration alert and voice playback
  13. Support wired coach function
  14. PARA wireless trainer system
  15. High-speed and low-latency coaching system
  16. Can wirelessly match FreeLink App and AirLink S module equipment to use
  17. Support 2S lithium battery balance charging function (Mini USB charging interface)
  18. Built-in RF module: ISRM-S-X9
  19. Smart port Micro SD memory card slot, Mini USB charging port, and DSC trainer port
  20. Model storage quantity: 60 groups (expandable through MicroSD card)
  21. Compatible: ACCST D16 and ACCESS series receivers

Useful Link:

FrSky FrSky Taranis X9D Plus 2019 Downloads Page


Package Includes:

1 x Taranis X9D 2019 Edition Radio System

1 x R9MX Receiver

1 x  Neck Strap and  Neck Strap Adapter

1 x USB type A to Mini USB Cable (50 cm)

1 x User Manual

This mini, fully integrated transmitter and receiver PWM output is the perfect solution for rc car racing and beginners. Adopts metal material, wear-resisting, and corrosion-resistant. This product is a wireless rc receiver for fpv racing, compatible with the transmitter and receiver board. Mini size and lightweight, easy to carry. Compatible for receiver and transmitter remote control. The receiver is small in size, light in weight, easy to carry and store. In the meantime, this product is suitable for micro receiver and pwm, as long as the transmitter set up, it can meet the needs of different users. With output port, you can directly connect to the receiver. The transmitter can be used for direct power supply, tv, dvd receiver and so on. This is a wireless remote control, and can be used as an independent diy or portable electronic device. This product adopts high quality abs material, with strong durability and stability, longterm use of advanced control chip. The product adopts high quality metal material, which is durable and you can use it with confidence of its excellent performance. Plug and play, compatible with most rc brands such as fj series transmitter, rc helicopter, toy car and so on.


Features: 

  1. Small in size
  2. Easy to install
  3. Low power consumations
  4. high qulity product
  5. Color: Black

Specifications:

  1. Product: Flysky FS2A 4CH Receiver
  2. Channels: 4CH
  3. Output signal: PWM
  4. Frequency range: 2.408-2.475GHZ
  5. Band width: 135
  6. Receiver sensitivity: -92DBM
  7. 2.4G mode: AFHDS 2A
  8. Failfe: Yes
  9. Supply voltage: 3.3-10V
  10. Distance: 400+ meters
  11. Working current: 20MA
  12. Size: 11 x 25MM
  13. Weight: 0.9 grams
  14. Support: FS-I6, FS-I6X, FS-I6S, FS-TM8, FS-TM10, FS-I10 and other AFHDS 2A protocol transmitter

Packages Inucludes: 

1 x Flysky FS2A 4CH Receiver

The RadioMaster TX16S Mark II Radio Transmitter is the latest in radio transmitter technology. This radio with V4.0 hall gimbal has 4in1 and ELRS versions, and you can choose it according to your request. The 4.3″ IPS color display provides easy programming with touch panel precision and the brand new 3.5mm audio headphone jack and built-in dual speakers provide great audio options for pilots!

Support EdgeTX and OpenTX
EdgeTX is installed by default (Touch screen enabled).
Note:Requires EdgeTX version 2.6.0 or OpenTX version 2.3.15 or later.


Features:

  1. Improved internal circuitry and optimized power supply.
  2. New charge circuitry with integrated reverse-polarity protection.
  3. Optimized charge IC now allows up to 2.2A internal USB-C charge current.
  4. Rear-mounted audio jack provided headphone output.
  5. V4.0 Gimbal improved centering and temperature stability (Same circuitry as AG01).
  6. Optional high/low rear grips are included for improved ergonomics.
  7. Improved S1/S2 knobs with clear center detents.
  8. Improved LS/RS Sliders with a smoother feel and better center detents.
  9. Redesigned battery cover for improved battery access.
  10. Retooled body shell with improved fit and finish.
  11. Trainer socket changed to standard TRS 3.5mm socket.
  12. Rear DIY Socket added for personalized mods.
  13. Improved internal plastics for better longevity.
  14. Available ELRS and 4in1 versions.

Package Includes:

1 x TX16S Mark II Radio Controller
1 x  18650 Tray
1 x USB-C Cable
1 x Screen Protector
1 x Pair of flat grips
1 x Pair of raised grips
1 x TX16S Key Chain
1 x User Manual

The Tandem X20 is a pioneering dual-band radio transmitter, it drew on feedback and experience with previous radios and adds many new features such as color touch screen, an ergonomic design that provides unprecedented comfort in the hand. On the RF side, we have given it the powerful RF system , the TD dual RF system, which does not simply reiterate the combined features of the FRSKY900MHz and 2.4GHz RF systems. The TD is characterized by its true simultaneous dual-band remote control with telemetry, enabling incredible and unmatched end-to-end 4ms latency. This radio ships with ETHOS, a completely new system that provides users with a powerful, intuitive, and flexible experience that maximizes the fun of the hobby

We have wide range of drone remote controller explore more CLICK HERE.

Note:

  1. For more info refer to user manual in attachment section.
  2. Actual product may vary form image in terms of design. 

 

 Below are Compatible battery packs specially built for this Transmitter

 


Features:

  1. 800 x 480 Color Touch-Screen Displays
  2. 6 Quick-Mode Custom Buttons (Front) and 2 Momentary Buttons (Rear)
  3. Lite Type External Module Bay
  4. Built-in 6-axis Gyroscope Sensor
  5. All CNC Metal Trims, Knobs
  6. Haptic Vibration Alerts and Voice Speech Outputs
  7. External Antenna Supports SWR indicator warning
  8. Supports Recharge System for 2S Li-ion Battery (USB Type-C Interface)
  9. High-speed PARA Wireless Training System (Compatible with FreeLink App3.0)
  10. High-Precision Hall-Sensor Gimbals with All-CNC Metal Panel
  11. ETHOS: The more powerful, Flexible and Intuitive OS for your radio.

Packages Includes:

1 x User manual

1 x Tandem X20 ACCESS remote controller (English)

1 x Belt & accessories

1 x Cover bag

1 x Frsky TDR6  6 channel Receiver

1 x Stickers

With DSSS&FHSS protocol, which makes R9DS with excellent anti-interference ability, control range up to 2.1 miles(3.4km) Support PWM/SBUS signal output, works with Radiolink AT9/AT9S/AT9S Pro/AT10/AT10II.


Features:

  1. Upgraded version, antenna is improved, signal will be more stable
  2. Dual-way communication function
  3. Could send back flight data
  4. High sensitivity, distance up to 1.1km
  5. DSSS technology, reliable
  6. Supported S-BUS and high-voltage steering engine

Specifications:

  1. Brand: RadioLink
  2. Model: R9DS
  3. Operating Voltage: 3.6-12V
  4. Operating Current: 38-45mA@5V.
  5. Frequency: 2.4GHz
  6. Channel: 9CH
  7. Color: Black
  8. Usage: Used for RadioLink AT9 AT10 remote controller

Packages Includes:

1 x Radiolink R9DS receiver

TX12MKII remote control is suitable for all types of fixed-wing aircraft, gliders, helicopters, cars, boats, robotics, multi-rotor aircraft, and anything else you might create, if you can build it this RadioMaster TX12 can control it.

TX12MKII comes Preinstalled with EdgeTX, the RadioMaster TX12 MKII which is cutting-edge software that is constantly evolving and improving. RadioMaster works closely with the EdgeTX team to develop features and optimize the user experience. We will continue to contribute and support projects like EdgeTX, ensuring the concepts of open standards are carried forward.


Features:

  1. Added internal ExpressLRS module support
  2. Updated main board design from STM32F207 to STM32F407
  3. Improved USB-C QC 3.0 Charging
  4. Precision hall-effect gimbals as standard
  5. EdgeTX operating system installed from the factory
  6. Updated rear case with comfortable grips
  7. Improved S1 / S2 slider grip
  8. SD Card included
  9. Provide M1 and M2 modes

Specification:

  1. Item: TX12 Mark II Radio
  2. Frequency: 2.400GHZ-2.480GHZ
  3. RF Chip: ExpressLRS (ELRS) / CC2500
  4. Working Current: 320mA@8.4V (ELRS) / 180mA@8.4V (CC2500)
  5. Voltage Range: 6.6-8.4v DC
  6. Radio Firmware: EdgeTX (Transmitter) / ExpressLRS (RF module) / MPM (RF module)
  7. Channels: Up to 16 (depending on the receiver)
  8. Display: 128 x 64 Monochrome LCD display
  9. Gimbal: High precision hall gimbals
  10. External module: JR/FrSKY/Crossfire compatible
  11. Upgrade Method: USB/SD card & EdgeTX Buddy online or EdgeTX Companion PC software
  12. USB Charging: QC3 USB-C
  13. SD Card: Included
  14. Size: 170 x 159 x 108mm
  15. Weight: 363g

Package Includes:

1 x Radiomaster TX12 MKII ExpressLRS EdgeTX Radio Controller

1  x  Antenna

1 x  USB-C Cable

1 x Quick Start Guide

1 x  Sticker

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Model

FrSky TARANIS X9D Plus 2019

Operating System

OpenTX

No. of Channels

24

Operating Voltage (VDC)

6.5 ~ 8.4

Current Consumption (mA)

130@8.2V

Operating Temperature Range (°C)

-10 to 55

Display Resolution

212 x 64

Available Ports

Smart Port, Micro SD card slot, and DSC Port

Color

silver

Length (mm)

200

Width (mm)

170

Height (mm)

70

Weight (gm)

656

Transmission frequency

2.400GHz-2.480GHz

Transmitter module

Option 1: Internal 4-in-1 multi-protocol module (CC2500 CYRF6936 A7105 NRF2401); Option2: Internal ELRS (SX1280)

Transmitting power

Internal 4-in-1 multi-protocol module : Max 100mw (protocol dependent); Internal ELRS : Max 250mw (transmitting power is adjustable)

Antenna gain

2db (transmit power adjustable)

Working current

400mA

Working voltage

6.6-8.4v DC

Remote control distance

>2km @ 22dbm

Radio firmware

EdgeTX

Module Firmware

Multiprotocol- Module (4IN1) -OR- ExpressLRS (ELRS)

Channels

Up to 16 channels (depending on the receiver)

Display

4.3-inch TFT full-colour touch display with a resolution of 480 x 272

Gimbal

Option 1: V4.0 Hall sensor with Aluminium fascia Option 2: AG01 CNC Hall sensor

Module Bay

JR compatible module bay

Upgrade method

Supports USB-C online / SD card offline upgrade

Dimensions

287 x 129 x 184mm

Weight

750g (without battery)

Operating Voltage Range

6.5 ~ 8.4V (2S Li-battery)

Operating Current (A)

240mA@7.4V (typ.)

Charging Current

≤1A ±200mA

Operating System

ETHOS

Internal RF module

TANDEM

Number of Channels

Up to 24 channels

Compatibility

ACCST D16 & ACCESS & TD receivers

USB Adaptor Voltage

5V+0.2V

USB Adaptor Current

>2.0A

Backlit touchable LCD resolution

800 x 480

Operating Temperature (°C)

-10°C~60°C(14°F~140°F)

Weight (g)

809g (without battery)

Product Dimensions

212 x 200 x 95mm