LM2576SX-5.0/NOPB – 5V 3A Fixed Output Step-Down Regulator SIMPLE SWITCHER IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x LM2576SX-5.0/NOPB – 5V 3A Fixed Output Step-Down Regulator SIMPLE SWITCHER IC SMD-5 Package

The AP2337 is single channel current-limited integrated high-side power switches optimized for hot-swap applications. The devices have fast short-circuit response time for improved overall system robustness and provide a complete protection solution for application subject to heavy capacitive loads and the prospect of short circuit.

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Features:

1. Low power consumption
2. Thermal Limit , UVLO , OVP
3. Compact design
4. Easy circuit design

Specifications:

1. Mount: Surface Mount
2. Case/Package: SOT-23-3
3. Number of Pins: 3
4. Weight: 0.000282 oz
5. Features: Thermal Limit , UVLO , OVP
6. Max Operating Temperature: 85 C
7. Max Output Current: 1 A
8. Max Supply Voltage: 5.5 V
9. Min Operating Temperature: -40 C
10. Min Supply Voltage: 2.7 V
11. Number of Channels: 1
12. Operating Supply Current: 65 uA
13. Lead Free: Lead Free
14. REACH SVHC: No SVHC
15. Radiation Hardening: No
16. RoHS: Compliant

Package Includes:

1 x AP2337SA-7 – 5.5V 1A 1-ch Current-limited Load Switch IC SMD-3 Package

Extended power range for higher power applications, No heat sink required up to 34 W using P/G packages, Features eliminate or reduce cost of external components, Fully integrated soft-start for minimum stress/overshoot, Externally programmable accurate current limit, Wider duty cycle for more power, smaller input capacitor, Separate line sense and current limit pins on Y/R/F.

Note for more details refer to datasheet.

1. Series: TOPSwitch-GX
2. Package: Tube
3. Standard Package: 50
4. Product Status: Not For New Designs
5. Output Isolation: Isolated
6. Internal Switch(s): Yes
7. Voltage – Breakdown: 700V
8. Topology: Flyback
9. Duty Cycle: 66.5%
10. Frequency – Switching: 66kHz ~ 132kHz
11. Power (Watts): 45 W
12. Fault Protection: Current Limiting | Over Temperature | Over Voltage
13. Control Features: Frequency Control
14. Operating Temperature: -40°C ~ 150°C (TJ)
15. Package / Case: TO-220-7 Formed Leads | 6 Leads
16. Supplier Device Package: TO-220-7C
17. Mounting Type: Through Hole
18. Base Product Number: TOP243

Packages Includes:

1 x TOP243YN – POWER INTEGRATI

With a wide range of items offered by the brand, Orange has attracted a lot of attention since our company’s debut. ORANGE Kit is an insertion of a new product line from our vast expertise knowledge base from past years. Here in this kit series, we are presenting a wide range of the most popular combo products.  At the Orange brand, we’ve gained the confidence of our consumers and got excellent comments for our Battery, Proximity sensor, Motor, BMS, and other products. When it comes to our own brands, Robu Labs tests them all before they are launched.

The kit contains a variety of voltage regulators in various ranges. This regulator can provide local on-card regulation, eliminating the distribution problems associated with single-point regulation. Each type employs internal current limiting, thermal shutdown, and safe area protection, resulting in it being essentially indestructible. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltage and currents.

The kit comes with Good Quality Plastic box with a separator to keep the connector in a sorted manner.

Package Includes:

1 x ORANGE 60PCS High-Power Three-Terminal Voltage Regulator Kit

Kit Includes:

6 x LM317T Voltage Regulator

6 x L7805CV Voltage Regulator

6 x L7806CV Voltage Regulator

6 x L7808CV Voltage Regulator

6 x L7809CV Voltage Regulator

6 x L7810CV Voltage Regulator

6 x L7812CV Voltage Regulator

6 x L7815CV Voltage Regulator

6 x L7818CV Voltage Regulator

6 x L7824CV Voltage Regulator

TOP244YN – POWER INTEGRATI

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x TOP244YN – POWER INTEGRATI

The DRV835x family of devices are highly-integrated gate drivers for three-phase brushless DC (BLDC) motor applications. These applications include field- oriented control (FOC), sinusoidal current control, and trapezoidal current control of BLDC motors. The device variants provide optional integrated current shunt amplifiers to support different motor control schemes and a buck regulator to power the gate driver or external controller. The DRV835x uses smart gate drive (SGD) architecture to decrease the number of external components that are typically necessary for MOSFET slew rate control and protection circuits. The SGD architecture also optimizes dead time to prevent shoot-through conditions, provides flexibility in decreasing electromagnetic interference (EMI) by MOSFET slew rate control, and protects against gate short circuit conditions through VGS monitors. A strong gate pulldown circuit helps prevent unwanted dV/dt parasitic gate turn on events Various PWM control modes (6x, 3x, 1x, and independent) are supported for simple interfacing to the external controller. These modes can decrease the number of outputs required of the controller for the motor driver PWM control signals. This family of devices also includes 1x PWM mode for simple sensored trapezoidal control of a BLDC motor by using an internal block commutation table.

Applications:

1. 3-phase brushless-DC (BLDC) motor modules
2. Fans, blowers, and pumps
3. E-Bikes, E-scooters, and E-mobility
4. Power and garden tools, lawn mowers
5. Drones, robotics, and RC toys
6. Factory automation and textile machines

Specifications:

1. Operating Voltage: 6V ~ 95V
2. Current: 25mA
3. Technology: Power MOSFET
4. Interface: SPI
5. Mounting type: SMD
6. Output conflagration: Half Bridge

Note: For more info refer to datasheet

Packages Includes:

1 x DRV8353RHRGZT IC