LNK626PG – LinkSwitch-CV Off-line Switcher AC-DC Converter IC

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x LNK626PG – LinkSwitch-CV Off-line Switcher AC-DC Converter IC DIP-7 Package

TNY264PN – POWER INTEGRATI

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x TNY264PN – POWER INTEGRATI

The DRV835x family of devices are highly-integrated gate drivers for three-phase brushless DC (BLDC) motor applications. These applications include field- oriented control (FOC), sinusoidal current control, and trapezoidal current control of BLDC motors. The device variants provide optional integrated current shunt amplifiers to support different motor control schemes and a buck regulator to power the gate driver or external controller. The DRV835x uses smart gate drive (SGD) architecture to decrease the number of external components that are typically necessary for MOSFET slew rate control and protection circuits. The SGD architecture also optimizes dead time to prevent shoot-through conditions, provides flexibility in decreasing electromagnetic interference (EMI) by MOSFET slew rate control, and protects against gate short circuit conditions through VGS monitors. A strong gate pulldown circuit helps prevent unwanted dV/dt parasitic gate turn on events Various PWM control modes (6x, 3x, 1x, and independent) are supported for simple interfacing to the external controller. These modes can decrease the number of outputs required of the controller for the motor driver PWM control signals. This family of devices also includes 1x PWM mode for simple sensored trapezoidal control of a BLDC motor by using an internal block commutation table.

Applications:

1. 3-phase brushless-DC (BLDC) motor modules
2. Fans, blowers, and pumps
3. E-Bikes, E-scooters, and E-mobility
4. Power and garden tools, lawn mowers
5. Drones, robotics, and RC toys
6. Factory automation and textile machines

Specifications:

1. Operating Voltage: 6V ~ 95V
2. Current: 25mA
3. Technology: Power MOSFET
4. Interface: SPI
5. Mounting type: SMD
6. Output conflagration: Half Bridge
7. Operating temperature: -40°C ~ 125°C (TA)

Note: For more info refer to datasheet

Packages Includes:

1 x DRV8353RSRGZR IC

The NCP1117 series are low dropout positive voltage regulators that are capable of providing an output current that is in excess of 1.0 A with a maximum dropout voltage of 1.2 V at 800 mA over temperature. This series contains nine fixed output voltages of 1.5 V, 1.8 V, 1.9 V, 2.0 V, 2.5 V, 2.85 V, 3.3 V, 5.0 V, and 12 V that have no minimum load requirement to maintain regulation. Also included is an adjustable output version that can be programmed from 1.25 V to 18.8 V with two external resistors. On-chip trimming adjusts the reference/output voltage to within ±1.0% accuracy. Internal protection features consist of output current limiting, safe operating area compensation, and thermal shutdown. The NCP1117 series can operate with up to 20 V input. Devices are available in SOT−223 and DPAK packages.

Application:

1. Consumer and Industrial Equipment Point of Regulation
2. Active SCSI Termination for 2.85 V Version
3.  Switching Power Supply Post Regulation
4. Hard Drive Controllers
5.  Battery Chargers

Features:

1.  Adjustable Output Voltage Option
2.  No Minimum Load Requirement for Fixed Voltage Output Devices
3.  Reference/Output Voltage Trimmed to ±1.0%
4.  Current Limit, Safe Operating, and Thermal Shutdown Protection
5.  The operation to 20 V Input
6.  These are Pb-Free Devices

Specifications:

1. Mounting Style: SMD/SMT
2. Package/Case: SOT-223-3
3. Output Voltage: 3.3 V
4. Output Current: 1 A
5. Number of Outputs: 1 Output
6. Polarity: Positive
7. Quiescent Current: 10 mA
8. Input Voltage MAX: 20 V
9. Input Voltage MIN: 4.75 V
10. Output Type: Fixed
11. Minimum Operating Temperature: 0 C
12. Maximum Operating Temperature: + 125 C
13. Dropout Voltage: 950 mV

Package Includes:

1 x NCP1117ST33T3G – 3.3V 1A Fixed/Adjustable Positive LDO Regulator 4-Pin SOT-223 (ON semiconductor)

LNK605DG-TL – POWER INTEGRATI

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x LNK605DG-TL – POWER INTEGRATI

LNK626PG – POWER INTEGRATI

Note:

1. Product Images are shown for illustrative purposes only and may differ from the actual product.
2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.
   

Package Includes:

1 x LNK626PG – POWER INTEGRATI