BLHeli is firmware that runs on some Atmel and SiLabs ESCs, supports One Shot 125, and is designed for multi-copter performance. BLHeli Suite is the companion application (windows only) that allows one to flash and configure BLHeli ESCs (Electronic Speed Controller).

The 32bit architecture enables the ESC to run at incredible speeds resulting in better performance, faster input signals and lower latency compared to older 8bit ESCs. The ESCs are low profile and compact in size, saving weight and making builds easy One shot (OneShot125) is a special mode for ESC’s running the BLheli firmware that allow your supported flight controller to communicate very quickly with your ESC, enabling your motors to react much faster than standard PWM communication protocols used on most ESC’s It adopts 32-bit stm32f051 main control chip, which has faster response speed and processing capability.

The operating frequency of up to 48MHZ and high-performance three-in-one drive make the throttle signal receiving delay lower, and the response and control of the motor change. High speed and precision allow the flying player to enjoy the thrill and advantage of flying at speed BLHeli was the original open source software that is no longer maintained and is not available on modern ESCs. BLHeli32 is closed source and based on 32bit ARM MCUs, All modern ESCs use BLHeli32 and also it  is open source Firmware.

1. Supports all common Dshot commands like Turtle Mode, 3D mode and change of rotation
2. Overcurrent protection (measures the current and reduces it to max. 40A)
3. Telemetry capability (voltage, current, temperature, speed)
4. advanced adaptive auto-timing (6.5-30° feed at each commutation)
5. For Race Multicopters (25A continuous even with weak cooling)
6. Very fast throttle response Linear throttle response Active freewheel (low diode losses)
7. Regenerative braking
8. Modern smart gate driver

Packages Includes:

1 x BLHeli_32 35A 32 bit 2-5S ESC

Beautiful and fashionable Exquisite and unique design, easy to carry, beautiful, and practical. interesting decoration: Simple appearance, it can easily match various home decoration styles. Simple appearance can be matched with various styles of accessories, suitable for different occasions. suitable for bedrooms: Suitable for high accuracy game time, durable, and not easy to damage.

Features:

1. F4 NOXE V3 FC acro + 35A ESC  electronic stability control system
2. The newly developed  F4 NOXE V3 FC acro + 35A ESC  in 1 miniature electronic stability control
3. High system integration, greatly reduced than the standard size, excellent performance, support 5S,

Package Includes:

1 x F4 NOXE V3 FC acro + 35A ESC

This T-motor 180A 12S Flame Type ESC featured efficient and reasonable dissipation, layered structure. Compatible with U12 Motors and specially designed for multi-rotors. T Flame ESC can give a continuous current of 180A, and a peak current of up to 200A (10 sec).

Features:

1. High-performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.
2. The throttle range can be configured to be compatible with all transmitters currently available on market.
3. Smooth, linear, quick, and precise throttle response.
4. CNC Aluminum alloy enclosure, IP55 PCB with nanotechnology, widely used in UAV agriculture, search and rescue, etc.
5. Separate voltage regulator IC for the microprocessor to get a better anti-jamming capability.
6. Multiple protection features: Low-voltage cut-off protection / over-heat protection/throttle signal loss protection.
7. USB supported. The firmware of the ESC can be updated by the USB adapter.
8. Several kinds of Program Cards are supported. Very easy to program the ESC at home or at the field.

Specifications:

1. Continuous Current (A): 180
2. Peak Current (10s): 200
3. BEC: N0
4. LIPO: 6-12s
5. Programmable: No
6. Dimension: 112 x 51 x 36 mm
7. Weight: 280 g

Package Includes:

1 x T motor Flame 180A 12S

When using a lithium battery pack of more than 3S, a switch‐mode BEC has much higher efficiency with lower heat. For a traditional linear BEC, Using a high-efficiency DC-DC voltage regulator chip, the conversion efficiency exceeds 90%.Has a working status indicator, which lights up when the UBEC is working normally. With input reverse connection protection, overcurrent protection, output short circuit protection, overheating protection and other functions, safe and reliable.

Features:

1. It adopted the advance regulator chip with conversion efficiency exceeding 90%
2. One output have 4 options for output voltage applicable for all kinds of receivers gyros servos
3. it featured input incorrect polarity protection

Package Includes:

1 x UBEC-8A+4A

Hobbywing XRotor 40A APAC Brushless ESC 2-6S for RC multicopters.Using Multicopter special program, fast throttle response surpasses all kinds of open source software; Firmware is optimized specifically for disc motor, and it has very good compatibility. The ESC is highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing) easy to use.

The throttle signal line is twisted wire to reduce crosstalk within the transmission signal generated by the copper so that a more stable flight; Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers.

Features:

1. Using a Multintegrated circuitopter special program, fast throttle response surpasses all kinds of open source software.
2. Firmware was optimized to specify integrated circuitously for disc motor, and it has very good compatibility.
3. Highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing, easy to use.
4. A throttle signal line is a twisted wire to reduce crosstalk within the transmission signal generated by the copper, so that more stable flight.
5. Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers. (Note: the throttle signal over 500Hz are all non-standard throttle signals)
6. Using MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built.
7. Ultra-low resistance MOSFET, strong flow capacity.

Package Includes:

1 x Hobbywing Xrotor 40A ESC for DIY Multicopter Drone

The Flame 80A HV V2 ESC by Tiger Motor provides professional-level power for large multi-rotor aircraft. The ESC is housed in a machined aluminum case providing both heat dissipation and protection.

Features:

1. High-performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.
2. The throttle range can be configured to be compatible with all transmitters currently available on market.
3. Smooth, linear, quick, and precise throttle response.
4. CNC Aluminum alloy enclosure, IP55 PCB with nanotechnology, widely used in UAV agriculture, search and rescue, etc.
5. Separate voltage regulator IC for the microprocessor to get a better anti-jamming capability.
6. Multiple protection features: Low-voltage cut-off protection / over-heat protection/throttle signal loss protection.
7. USB supported. The firmware of the ESC can be updated by the USB adapter.
8. Several kinds of Program Cards are supported. Very easy to program the ESC at home or at the field.

Specifications:

1. Output: Continuous 80A, Burst 105A up to 10 Secs.
2. Input Voltage: 6-12 cells lithium battery.
3. Refresh Rate: 600Hz
4. Protection: IP57
5. BEC: No
6. Signal Frequency: Up to 621Hz
7. Size: 77mm (L) x 35mm (W) x 18mm (H).
8. Weight: 94g.

Package Includes:

1 x T Motor FLAME 80A 12S V2.0 ESC