RP2040 is the debut microcontroller from Raspberry Pi. It brings our signature values of high performance, low cost, and ease of use to the microcontroller space. With a large on-chip memory, symmetric dual-core processor complex, deterministic bus fabric, and rich peripheral set augmented with our unique Programmable I/O (PIO) subsystem, it provides professional users with unrivaled power and flexibility.

Flexible I/O connects RP2040 to the physical world by allowing it to speak to almost any external device. High-performance breezes through integer workloads. Low cost helps ease the barrier to entry.

This isn’t just a powerful chip: it’s designed to help you bring every last drop of that power to bear. With six independent banks of RAM and a fully connected switch at the heart of its bus fabric, you can easily arrange for the cores and DMA engines to run in parallel without contention.

RP2040 builds Raspberry Pi’s commitment to inexpensive, efficient computing into a small and powerful 7 mm × 7 mm package, with just two square millimeters of 40 nm silicon.

With detailed documentation, a polished MicroPython port, and a UF2 bootloader in ROM, it has the lowest possible barrier to entry for beginner and hobbyist users. RP2040 is a stateless device, with support for cached execute-in-place from external QSPI memory.

This design decision allows you to choose the appropriate density of non-volatile storage for your application, and to benefit from the low pricing of commodity Flash parts. RP2040 is manufactured on a modern 40nm process node, delivering high performance, low dynamic power consumption, and low leakage, with a variety of low-power modes to support extended-duration operation on battery power.

Read more about RP2040 on Raspberry Pi Official Page Click Here

Key Features and Specifications:

1. Dual ARM Cortex-M0+ @ 133MHz
2. 264kB on-chip SRAM in six independent banks
3. Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
4. DMA controller
5. Fully-connected AHB crossbar
6. Interpolator and integer divider peripherals
7. On-chip programmable LDO to generate core voltage
8. 2 on-chip PLLs to generate USB and core clocks
9. 30 GPIO pins, 4 of which can be used as analog inputs
10. Peripherals:
    ◦ 2 UARTs
    ◦ 2 SPI controllers
    ◦2 I2C controllers
    ◦16 PWM channels
    ◦USB 1.1 controller and PHY, with host and device support
    ◦8 PIO state machines
11. Whatever your microcontroller application, from machine learning to motor control, from agriculture to audio, RP2040has the performance, feature set, and support to make your product fly.

For detailed technical specifications about the product, download the datasheet in the attachment 

Package Includes:

1 x RP2040 Microcontroller IC by Raspberry PI

Create the complete desktop ecosystem of Raspberry Pi at your desk with an official Raspberry Pi Keyboard and Mouse. In India, we generally use the US Layout keyboard and therefore we have imported the US layout Official Raspberry Pi Keyboard from RPI officials.

Keyboard Layout:

The keyboard is a 78-key matrix, like those more commonly found in laptop computers. This is the same compact style used in previous Pi kits. It boasts key features such as, three USB type-A ports for connecting or powering other peripherals to pi,  one micro-USB port to power the Keyboard itself from Raspberry Pi board for which cable included in the box, three lock keys with corresponding LED indicator lights, and a dedicated Raspberry Logo key to the lower left (where otherwise you might have found a Windows key).

Note: Mouse shown in the image is not included in the package you have to buy it separately. Click here to buy.

Features:

1. Three integrated USB 2.0 ports for powering additional peripherals
2. Ergonomic design for comfortable use
3. Automatic keyboard language detection
4. US Keyboard layout with 78 keys
5. Compatible with all Raspberry Pi products
6. USB-A to Micro USB B cable for connection

Package Includes:

1 x Official Raspberry Pi Keyboard, (Black/Grey)

1 x USB-A to Micro-USB Cable (1-Meter Length)

Create the complete desktop ecosystem of Raspberry Pi at your desk with an official Raspberry Pi Keyboard and Mouse. In India, we generally use the US Layout keyboard and therefore we have imported the US layout Official Raspberry Pi Keyboard and Universal Mouse from RPI officials.

The mouse is a standard wired three-button optical mouse with a scroll wheel that can be plugged into the back of the keyboard to keep your desk a bit tidier.

Note: The keyboard shown in the image is not included in the package you have to buy it separately. Click here to buy

Features:

1. Three-button optical mouse
2. Scroll wheel
3. USB type-A connector
4. Compatible with all Raspberry Pi products
5. Ergonomic design for comfortable use

Package Includes:

1 x Official Raspberry Pi Mouse (Black/Grey)

The raspberry Pi Official Power Supply is an official and recommended universal micro USB power supply for Raspberry Pi. Before importing we’ve tested the samples of this power supply in all kinds of situations, and it has passed all our lab tests. Manufactured by one of the third party manufacturers It is a specially designed power supply to keep feeding your Pi the steady 2.5A it needs for proper performance. With official Raspberry Pi’s logo engraved on the case, it follows all standards set by Raspberry Pi officials.

This Raspberry Pi Official Power Supply comes with four different plug adapters with these you can plug it to any country type AC power out plug.

Features: 

1. 1.5 Meter Cable lead.
2. Micro USB Connector.
3. Interchangeable heads for different countries.
4. Short circuit, over-current and over-voltage protection.
5. 50,000 hours Mean time between failure (MTBF).

Package Includes:

1 x Raspberry Pi Official Power Supply.

Raspberry Pi released an official 48W (8V DC, 6A) power supply, designed for use with the Raspberry Pi Build HAT. Similarly, it can also power the Raspberry Pi via the BuildHAT.

Power your Raspberry Pi Build HAT projects with the Raspberry Pi Build HAT Power Supply. This 48W power supply will power the Build HAT and connected LEGO  Technic motors, as well as your Raspberry Pi computer. Compatible with LEGO Technic motors and sensors included in the LEGO Education SPIKETM Portfolio, the Build HAT combines the power of Raspberry Pi computing with easy building opportunities to help you make creative and robust projects.

Features:

• Input: 110-240V AC
• Output: 8V DC, 6A
• Cable: 1.5M, 16 awg (Premium Quality)

Technical Specifications:

Output

1. Output voltage: +8.0V DC
2. Minimum load current: 0.01A
3. Nominal load current: 6.0A
4. Maximum power: 48.0W
5. Load regulation: ±5%
6. Line regulation: ±5%
7. Ripple & noise: 200mVp-p
8. Rise time: 100ms maximum to regulation limits for DC outputs
9. Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
10. Protection: Short circuit protection, Overcurrent protection, Overvoltage protection
11. Efficiency: 87.77% minimum (output current from 100%, 75%, 50%, 25%)
12. Output cable: 1.5m 16AWG
13. Output connector: Barrel connector 5.5mm × 2.1mm × 11mm Centre positive

Input

1. Voltage range: 100-240Vac (rated) 96-264Vac (operating)
2. Frequency: 50/60Hz ±3Hz
3. Current: 1.2A maximum
4. Power consumption (no load): 0.1W maximum
5. Inrush current: No damage shall occur and the input fuse shall not blow

Package Includes:

1 x Raspberry Pi Build Hat Power Supply

With each iterative edition of the Advancement in Development boards, they get more small, and outdated HDMI-A display connectors are being replaced with MINI and MICRO HDMI ports. As a result, having such an adaptor on your workstation is now required.

This official Raspberry Pi Mini HDMI male to Standard HDMI is the new and mature interface standard for display devices, monitors, TV, TFT display, touch screen display, and many more that come with HMDI interface, and of course, it is the Raspberry Pi Zero that comes with MINI HDMI interface for us. This cable is not compatible with the Raspberry Pi 3 or related boards; it is only compatible with the Raspberry Pi Zero family of SBCs. The HDMI port on the Raspberry Pi Zero board is small due to its small size.

Features:

1. Nickel Plated Connector Pins
2. Compatible with: Raspberry Pi Zero; Raspberry Pi Zero W; Raspberry Pi Zero W2
3. Fully triple shielded for increased noise immunity
4. Officially licensed by the Raspberry Pi foundation

Specifications:

1. Connector pins: HDMI mini male  to HDMI-A Female
2. Length: 10cm
3. Colour: White
4. 4Kp60 compliant
5. 20Mohm 300VDC insulation withstands 300VDC for 0.1s

Package Includes :

1 x Raspberry PI official Mini HDMI Male to HDMI-A Female Adapter Cable-White