This is the 2.7mm Wide Angle Lens, an add-on for the M12 Raspberry Pi High-Quality Camera. It has a wide field of view and a variety of uses, like CCTV applications, or of course, cat photos. Includes a thumbscrew to quickly and easily assemble onto the HQ Camera Board.

Wide-angle lenses are good for getting shots of a big area, wildlife cameras, security cameras, doorbell cams, etc. The video may be distorted around the edges to fit it all into the sensor.

For use with the M12 Raspberry Pi High-Quality Camera only. We also carry a 25mm 5MP Telephoto Lens.

Features:

1. Easy to use
2. Compact design
3. Low power consumption
4. High signal-to-noise ratio (SNR)
5. Built-in 2D Dynamic Defect Pixel Correction (DPC)
6. Phase Detection Autofocus (PDAF) for rapid autofocus

Specifications:

1. Model: Model
2. Resolution: 12M
3. Focal length: 2.7mm
4. Aperture (F/NO): 2.8
5. Back focus length: 4.97mm
6. DISTORTION: <-1.5%
7. Mount: M12*P0.5
8. Operating temperature:  -30 ~ +70°C
9. Construction: 5G2P+IR
10. Weight: 6g

Packages includes:

1  x  Official Raspberry Pi 12MP 2.7MM Wide-angle lens

Raspberry Pi released an official 48W (8V DC, 6A) power supply, designed for use with the Raspberry Pi Build HAT. Similarly, it can also power the Raspberry Pi via the BuildHAT.

Power your Raspberry Pi Build HAT projects with the Raspberry Pi Build HAT Power Supply. This 48W power supply will power the Build HAT and connected LEGO  Technic motors, as well as your Raspberry Pi computer. Compatible with LEGO Technic motors and sensors included in the LEGO Education SPIKETM Portfolio, the Build HAT combines the power of Raspberry Pi computing with easy building opportunities to help you make creative and robust projects.

Features:

• Input: 110-240V AC
• Output: 8V DC, 6A
• Cable: 1.5M, 16 awg (Premium Quality)

Technical Specifications:

Output

1. Output voltage: +8.0V DC
2. Minimum load current: 0.01A
3. Nominal load current: 6.0A
4. Maximum power: 48.0W
5. Load regulation: ±5%
6. Line regulation: ±5%
7. Ripple & noise: 200mVp-p
8. Rise time: 100ms maximum to regulation limits for DC outputs
9. Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
10. Protection: Short circuit protection, Overcurrent protection, Overvoltage protection
11. Efficiency: 87.77% minimum (output current from 100%, 75%, 50%, 25%)
12. Output cable: 1.5m 16AWG
13. Output connector: Barrel connector 5.5mm × 2.1mm × 11mm Centre positive

Input

1. Voltage range: 100-240Vac (rated) 96-264Vac (operating)
2. Frequency: 50/60Hz ±3Hz
3. Current: 1.2A maximum
4. Power consumption (no load): 0.1W maximum
5. Inrush current: No damage shall occur and the input fuse shall not blow

Package Includes:

1 x Raspberry Pi Build Hat Power Supply

After a long wait of almost 7 years, the Raspberry Pi released the camera-3 series, the successor to the Camera module 2 series. This newest addition of Raspberry Pi Camera 3 NoIR to the Raspberry Pi mainstream camera lineup replaces the wildly successful Camera Module 2, which was introduced in April 2016.

The all-new Raspberry Pi Camera 3 Standard/Wide is a camera for Raspberry Pi computers. Featuring autofocus and a 12-megapixel sensor and supported by Raspberry Pi’s Picamera2 Python library, Camera Module 3 gives you excellent image quality with precise control.
Raspberry Pi Camera 3 NoIR came up with significant improvements over Camera Module 2, which is built around a 12-megapixel Sony IMX708 image sensor. Additionally, Camera Module 3 is offered with a normal (76°) or wide-angle (120°) lens, as well as in regular and infrared-sensitive (NoIR) versions.

• The standard variant is designed to take pictures in normal light.
• The NoIR variant doesn’t have an infrared filter, so you can use it together with an infrared light source to take pictures in the dark.

Below is the short spec comparison of all variants:

Features:

• Back-illuminated and stacked CMOS 12-megapixel image sensor (Sony IMX708)
• High signal-to-noise ratio (SNR)
• Built-in 2D Dynamic Defect Pixel Correction (DPC)
• Phase Detection Autofocus (PDAF) for rapid autofocus
• QBC Re-mosaic function
• HDR mode (up to 3-megapixel output)
• CSI-2 serial data output
• 2-wire serial communication (supports I2C fast mode and fast-mode plus)
•  2-wire serial control of focus mechanism
• Improved low-light sensitivity.
• High dynamic range (HDR) support.
• Sony IMX708 12MP sensor with 12C-controlled focus actuator
• Large 7.4mm diagonal sensor
• Resolution: 12 Megapixel
• Diagonal Viewing Angle: 76º
• Compatible with all models of Raspberry Pi*

*Note: To connect with Raspberry Pi Zero models this camera requires a special camera cable. Buy Now

Package Includes:

1 x Raspberry Pi Camera Module 3 – NoIR

All Variants:

The raspberry Pi Official Power Supply is an official and recommended universal micro USB power supply for Raspberry Pi. Before importing we’ve tested the samples of this power supply in all kinds of situations, and it has passed all our lab tests. Manufactured by one of the third party manufacturers It is a specially designed power supply to keep feeding your Pi the steady 2.5A it needs for proper performance. With official Raspberry Pi’s logo engraved on the case, it follows all standards set by Raspberry Pi officials.

This Raspberry Pi Official Power Supply comes with four different plug adapters with these you can plug it to any country type AC power out plug.

Features: 

1. 1.5 Meter Cable lead.
2. Micro USB Connector.
3. Interchangeable heads for different countries.
4. Short circuit, over-current and over-voltage protection.
5. 50,000 hours Mean time between failure (MTBF).

Package Includes:

1 x Raspberry Pi Official Power Supply.

The New Launched  Raspberry Pi Debug Probe is an inexpensive, all-in-one USB-to-serial debug and UART bridge. It provides the necessary hardware and cabling to support “plug and play” debugging of Raspberry Pi Pico and other microcontrollers- and microprocessor-based platforms.

The Raspberry Pi Debug Probe provides both a processor serial debug interface (by default this is the ARM Serial Wire Debug interface) and an industry-standard UART interface. Both interfaces use a 3-pin debug connector, as specified in the Raspberry Pi 3-pin debug connector specification.

The Raspberry Pi Debug Probe is provided as a kit, containing the probe hardware in a plastic case, and a set of cables: a USB cable, and three different types of debug cables to cover the vast majority of use cases. While it has been designed primarily for use with Raspberry Pi debug targets, the Debug Probe provides standard CMSIS-DAP debug and UART interfaces over USB; it can therefore be used to debug other targets, or simply as a cost-effective USB-to-UART cable.

The Raspberry Pi Debug Probe is based on the Raspberry Pi Pico hardware design and runs the open-source Raspberry Pi Picoprobe software [picoprobe]. Updating the firmware is accomplished in the same way as on a Raspberry Pi Pico, so it is straightforward to keep the unit up to date with the latest Picoprobe firmware or to use custom firmware.

Features:

1. All-in-one USB-to-serial debug and UART bridge
2. Both interfaces use a 3-pin debug connector
3. Open-source Raspberry Pi Picoprobe software
4. Three different types of debug cables to cover the vast majority of use cases
5. plug and play” debugging of Raspberry Pi Pico and other microcontrollers- and microprocessor-based platforms.

For Technical Details about the product go through the datasheet in the attachments

Package Includes:

1 x Official Raspberry Pi Debug Probe

The Official USB type C 15.3W (UK PLUG) Power Supply For Raspberry Pi 4 is Latest officially launched power supply for all new Raspberry Pi 4 Model. It is compatible with Indian sockets operate on 90V to 230v AC and provides stable 5V 3A power to the Pi.

The adapter comes with 1.5m 18 AWG captive cable with USB-C output connector. The design of the adapter with a Raspberry LOGO engraved on the top which makes it different from any other adapter available in the market.

Features:

1. Comes with UK PLUG
2. Good Quality material
3. 96-230Vac operating input range
4. 50,000 hours MTBF
5. 6-month warranty.
6. USB-C connection goes straight into your Raspberry Pi

Package Includes:

1 x Official USB type C 15.3W Power Supply For Raspberry Pi 4(UK PLUG)