As the successor to the e450, this compact and handy charger offers more convenience. Because instead of an imprecise switch to select the charging current, this can now be selected simply by pressing a button. The integrated balancer adjusts the charge current for each individual cell individually to charge the LiPo battery to 100%.
The selection and the charge status of each individual cell itself are displayed via the LEDs. So you really always keep the overview. And with the included XT60 connector, you also get the assurance of always having the most common battery types connected correctly.

Features:

1. Compact, easy-to-use charger
2. Suitable for 2S-4S LiPo cells and 6-8 NiMH cells.
3. Connects directly to the wall outlet at a voltage range of 100 V to 240 V
4. Suitable for LiPo and NiMH batteries
5. Charge status indicator:
   1. White (continuous): current selection
   2. White (flashing): current charging progress

Specifications:

1. Operating voltage: 100-240 V
2. Charge current: 1 A/2 A/3 A/4 A (+-10 %) via button
3. Charge power: 50 W
4. Count of cells: 2S/3S/4S LiPo/LiFe/LiHV, 6-8 cells NiMH batteries
5. Balancer current: 300 mA
6. Display: 8 LEDs
7. Weight without cable: 191 g
8. Dimensions without cable: 110 x 70 x 40 mm

Package Includes:

1 x SkyRC e455 charger
1 x Power cord (2-pin UK Plug)

This is a 18650 Lithium Battery Shield V8 Mobile Power Expansion Board Module 5V/3A 3V/1A Micro USB for Arduino ESP32 ESP8266. This mobile power supply has a built-in lithium battery protection IC, which has overcurrent, overvoltage, Undervoltage protection, and the module is a portable mobile power supply that supports 3V/1A and 5V/3A two voltage outputs.

Installation of the battery must be determined positive and negative, the board has been clearly marked positive and negative Or Installation errors will burn out the module. The battery voltage works normally from 3.2V to 4.2V. 5V voltage output rated current is 3A, maximum support 3.6A current (not recommended for overload, easy to damage the module, speed up the service life), the output of current depends on the quality of the 18650 battery.

Features:

1. Supports 3V 1A voltage outputs.
2. Supports 5V 3A voltage outputs.
3. Micro USB charging current is 600mA-800mA.
4. Supports up to two 18650 batteries. It is recommended to use two 18650 batteries, which can be longer.

Package Includes:

2 x 18650 Lithium Battery Shield V8 Mobile Power Expansion Board Module 5V/3A 3V/1A Micro USB for Arduino ESP32 ESP8266

Do you want to build your own QUICK CHARGE power bank from your spare 18650 battery cells?  Then this 18650 5V 1A/2A Lithium Battery Digital Display Charging Module is for you. Just like a modern power bank, the module is equipped with Dual USB output to charge the gadgets at 2.1A and 1A. To charge the batteries, this module has two USB inputs one is C-type input, and the other is a MicroUSB input. Onboard, a brilliant blue-colored illuminating LED Display displays the real-time battery percentage in the 0–100% range, as well as the IN and OUT Signal. Furthermore, the board contains a connection for installing an LED to be used as a flashlight, which is generally found on a POWER BANK.

So, if you have any spare 18650 batteries cells in your scrap box, buy this module and create your own Power Bank, then share your DIY experience with us.

Caution: Pay attention to battery polarity while connecting it to the board, wrong polarity will burn the components 

The IMAX B6 80W 6A Charger/Discharger 1-6 Cells is a very advanced charger, able to charge, balance and discharges LiIon, LiPoly, LiFe (A123), NiCd and NiMH batteries. It is microprocessor controlled just like all the best chargers and will balance the individual cells in you Li-XX batteries.

It will charge from 0.1 to 6.0A and is capable of charging packs up to 6S packs. It’s feature input voltage protection so as not to flatten your car battery at the field and will also storage charge you pack for when you are not using them. You can power it with any power supply delivering from 11~18V so it is very flexible.

This charger has a JST-XH charge plug, which makes it compatible with Zippy, HXT, Loong Max and any pack with a JST adapter.

Note: Power supply not included. Also, JST-XH Charging plug is not included, you have to purchase it separately.

Features:

1. Microprocessor controlled
2. Delta-peak sensitivity
3. Individual cell balancing
4. LiIon, LiPoly, and LiFe capable
5. NiCd and NiMH capable
6. Large range of charge currents
7. Storage charge function
8. Time limit function
9. Input voltage monitoring (Protects car batteries in the field)
10. Data storage (Store up to 5 packs in its memory)
11. Battery break in and cycling.

Package Includes :

1 x IMAX B6 80W 6A Charger.
1 x T plug with banana connector charging cable.
1x DC cable with Alligator Clip charging connector.
1 x T plug with Alligator Clip connector charging cable.
1x T plug with Futaba connector charging cable.
1 x T plug with JST connector charging cable.
1x T plug with XT60 connector charging cable.
1 x English manual.

HTRC-P10 Smart Battery Charger

1. Lithium Batteries Mode
   For charging 12.6V or 25.2V Lithium batteries. When selected, the Lithium blue LED will
   illuminate. For use on batteries with Battery Management Systems (BMS) only.
2. Lead-Acid Batteries Mode
   For AGM, GEL, SLA, WET, DEEP CYCLE, EFB, Calcium Batteries
3. Motorcycle and LiFePO4 Batteries Mode
   An advanced battery recovery mode for repairing and storing, old, idle,
   damaged, stratified or sulfated.
   Not all batteries can be recovered, only can used on Motorcycle and Car batteries

Features: 

1. High efficiency (>85%).
2. Full microprocessor controlled.
3. LCD display: voltage, current, temperature etc.
4. Ease of use. Clear charging status display.
5. Lithium, Lead-Acid, LiFePO4 battery types can be selectable
6. The 7-stage microprocessor controlled charging process
7. provides the best possible application and enables efficient battery charging.
8. Charging voltage adapts to temperature, which can prevent over-or under-charging of the battery.
9. Capable of recharging severely discharged or heavily sulfated battery.
10. Do not over-charge your battery even it is kept connecting in any mode.
11. Reverse polarity protection, short circuit protection, over-charge protection, parks free contact.

Specification:

1. AC Input Voltage:100-240V 50/60Hz
2. Output Voltage:12V/24V
3. Output Current:12V10A&24V5A
4. Output Volt under No Load:27.6V
5. Minimum Start Volt: >9.0V
6. Input Power with Load: MAX.120W
7. Input Power under no Load:2.8W
8. Dimension:158x90x50mm

Package Includes :

1 x HTRC-P10 Smart Battery Charger

This is a 4x 18650 Lithium Battery Shield V8 V9 Mobile Power Expansion Board Module 5V/3A 3V/1A Micro USB for Arduino ESP32 ESP8266. This mobile power supply has a built-in lithium battery protection IC, which has overcurrent, overvoltage, Under voltage protection, and the module is a portable mobile power supply that supports 3V/1A and 5V/3A two voltage outputs with an onboard voltage switching button

Installation of the battery must be determined positive and negative, the board has been clearly marked positive and negative Or Installation errors will burn out the module. The battery voltage works normally from 3.2V to 4.2V. 5V voltage output rated current is 3A, maximum support 3.6A current, the output of current depends on the quality of the 18650 battery.

Note: This product comes from different brands. We will ship it randomly according to availability.

Features:

1. Supports 3V 1A voltage outputs.
2. Supports 5V 3A voltage outputs.
3. Micro USB charging current is 600mA-800mA.
4. Supports up to two 18650 batteries. It is recommended to use two 18650 batteries, which can be longer.

Package Includes:

1 x 4 x 18650 Lithium Battery Shield V8 V9 for Arduino ESP32 ESP8266