The Pico-BLE is a dual-mode Bluetooth 5.1 expansion module designed for Raspberry Pi Pico, which is controlled via UART AT commands, with SPP and BLE support. Combined with the Raspberry Pi Pico, it can be used for Bluetooth wireless communication applications.

Features: 

1. Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series
2. Controlled via UART AT commands, get started quickly
3. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)

Package Includes:

1 x Pico-BLE

Yeah! HDMI is the new and mature interface standard for display devices, monitors, TV, TFT display, touch screen display and many more comes with HMDI interface, and of course, for us, it is Raspberry Pi comes with HDMI interface. But this cable is not for Raspberry Pi 3 or similar boards, because it is meant for the Raspberry Pi Zero series of SBC. Due to the size of the Raspberry Pi Zero board, the HDMI port is a mini size.

And this official Raspberry Pi Mini HDMI Cable are now available at Cytron! Created to give fantastic performance and functionality for the Raspberry Pi Zero, Zero W and Zero W2. Made with high-quality materials and built to a world-class specification. Triple-layer shielding enables the best performance for the Raspberry Pi, and nickel-plated contacts ensure maximum signal transfer.

Features:

1. HDMI plug to HDMI plug leads
2. Standard HDMI to Mini HDMI
3. Length: 1 Metre
4. Colour: White
5. Compatible with: Raspberry Pi Zero; Raspberry Pi Zero W; Raspberry Pi Zero W2
6. Fully triple shielded for increased noise immunity
7. Officially licensed by the Raspberry Pi foundation

Package Includes :

1 x Raspberry PI official Mini HDMI to Std HDMI Cable 1m,(White)

The Compute Module 3 contains the guts of a Raspberry Pi 3 (the BCM2837 processor and 1GB RAM) as well as an optional 4GB eMMC Flash device (which is the equivalent of the SD card in the Pi). The Pi 3 has a processor speed of 1.2GHz and runs at roughly 10 times the speed of the Pi 1 due to its quad-core CPU. This is all integrated on to a small 67.6mm x 31mm board which fits into a standard DDR2 SODIMM connector (the same type of connector as used for laptop memory).

The Flash memory is connected directly to the processor on the board, but the remaining processor interfaces are available to the user via the connector pins. You get the full flexibility of the BCM2837 SoC (which means that many more GPIOs and interfaces are available as compared to the Raspberry Pi), and designing the Module into a custom system should be relatively straightforward as we’ve put all the tricky bits onto the Module itself.

Features:

1. Processor: The module is based on the Broadcom BCM2837 processor, which includes a 64-bit ARM Cortex-A53 CPU clocked at 1.2GHz.
2. Memory: The module includes 1GB of LPDDR2 RAM and a 4GB eMMC flash memory module for storage.
3. Form factor: The CM3 module measures just 67.6mm x 31mm and has a standard DDR2 SODIMM connector.
4. I/O interfaces: The module includes two 100-pin expansion headers that provide access to a wide range of I/O interfaces, including USB, Ethernet, SPI, I2C, and GPIO.
5. Operating temperature range: The CM3 is designed to operate in a range of environments, with a wide operating temperature range of -20°C to 70°C.
6. Power input: The module supports a range of power input voltages, from 5V to 20V DC.
7. Flexibility: The CM3 is a flexible computing platform that offers a great balance of performance, power consumption, and ease of integration, making it a popular choice for a wide range of embedded systems and other applications.

Specifications:

1. Processor: Broadcom BCM2837 processor 64-bit ARM Cortex-A53 CPU
2. Clock Speed: 1.2GHz.
3. Memory: 1GB of LPDDR2 RAM
4. Flash Memory: 4GB eMMC flash memory
5. I/O interfaces: includes two 100-pin expansion USB, Ethernet, SPI, I2C, and GPIO
6. Operating temperature range: -20°C to 70°C
7. Power input: 5V to 20V DC

Package Includes: 

1 x CM3 Compute Module (1GB DRAM, 4GB Emmc)

Arducam Cable Extension Kit for Raspberry Pi Camera, Up to 15-Meter Extension, Compatible with Raspberry Pi Camera V1/V2/HQ, and 16MP Autofocus Camera Module

This extension cable is a kit for the Raspberry Pi that replaces the CSI cable (Camera Serial Interface) with a LAN/Ethernet cable. This allows you to significantly increase the length of cable available and place the camera module up to 15 meters away from the Raspberry Pi. The kit is divided into two parts: the Transmitter Board (Tx board) which is connected to your Raspberry Pi camera module/HQ camera; and the Receiver Board (Rx) which is connected to the Raspberry Pi via the GPIO row of pins.

Assembly Instructions:

• Plug the Rx board into the Raspberry Pi board;
• Plug the Tx board into the Raspberry Pi camera;
• Connect the Rx and Tx boards with a network cable.

Features:

1. Designed for Raspberry Pi: This extension cable kit is designed for Raspberry Pi and Raspberry Pi cameras. The purpose is to keep your camera long away from the Raspberry Pi. This way you can get clear and delay-free images no matter where you put your Raspberry Pi.
2. Extend up to 15 meters: With just one LAN/Ethernet cable, you can place the camera module up to 15 meters away from the Raspberry Pi.
3. Easy to plug and play: Setup is hassle-free and plug&play. There is no need to install any additional software or scripts. Please note that updated drivers are required if working with the Arducam IMX519 16MP AF camera (SKU: 1263925).
4. Supported cameras: Raspberry Pi Camera V1, Raspberry Pi Camera V2, Raspberry Pi High Quality (HQ) Camera, and Arducam 16MP autofocus camera. It can work with the synchronized quad-camera kit for a 15-meter connection too.
5. Package includes: The kit includes two boards (Rx and Tx board), a 1-meter LAN cable, two 8cm ribbon flex cables for MIPI CSI-2 Transmission and mounting screws.

Package Includes:

1 × The Rx board

1 × Tx board,

1 × 1-meter LAN cable

2 × 8cm ribbon flex cables for MIPI CSI-2 Transmission,

1 × Mounting screws.

HDMI Adapter For DIY HDMI Cable, Vertical/Right-Angle Connector. High-Definition Multimedia Interface (HDMI) is a proprietary audio/video interface for transmitting  uncompressed video data and compressed or uncompressed digital audio data from an HDMI-compliant source device, such as a display controller, to a compatible computer monitor, video projector, digital television or digital audio device. HDMI is a digital replacement for analog video standards.

HDMI implements the EIA/CEA standards, which define video formats and waveforms, transport of compressed and uncompressed LPCM audio, auxiliary data, and implementations of the VESA EDID. CEA-861 signals carried by HDMI are electrically compatible with the CEA-861 signals used by the DIGITAL VISUAL INTERFACE (DVI).

Package Include:

1 X HDMI Adapter Vertical

The HDMI Female to Mini HDMI Male Adapter eliminates the need for multiple cables and clutter. It is a cost-effective way of connecting HDMI Mini-enabled devices to standard HDMI ports.

The HDMI Female to Mini HDMI Male Adapter adapts an HDMI cable to fit into a Mini HDMI port on a laptop, camcorder, camera, or tablet. It is fully compliant with the latest HDMI standard, this Mini HDMI to HDMI adapter is capable of carrying the increased bandwidth of HDMI 2.0 at 18 Gbps.

It Supports Audio Return Channel (ARC), HDMI Ethernet Channel (HEC), 48 Bit Deep Color, 32 channel audio, HDCP, Dolby True HD 7.1 audio, and 3D video, also Supports resolutions up to 4Kx2K (UHD) including 4096×2160, 3840×2160, 2560×1600, 2560×1440, 1920×1200, and 1080p.

Gold plated male to female adapter resists corrosion and provides rigidity. Grip treads help easy plugging and unplugging.

Package Includes:

1 x Rpi Official HDMI Female to Mini HDMI Male Adapter