- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Operating voltage: 3.3V / 5V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimension: 42mm × 27mm
- Display size: 21.76mm × 14mm
- Dot pitch: 0.175 × 0.17
- Resolution: 128 × 80
- Display color: black, white
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI control interface, for working with host boards such as Raspberry Pi/Jetson Nano/Arduino.
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Interface: 3-wire SPI, 4-wire SPI
- Dot pitch: 0.181 × 0.181
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc.
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Display color: ACep 7-Color
- Interface: 3-wire SPI, 4-wire SPI
- Crey scale: 2
- Display size: 86.40 × 54.00mm
- Dot pitch: 0.135 × 0.135mm
- Resolution: 640 × 400 pixels
- Advanced Color ePaper (ACeP) technology, supports a 7-Color display
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Add to Wishlist
Add to Wishlist
- Power: NFC-powered
- Resolution: 400×300
- Dot pitch: 0x212x 0x212
- Refresh time: 4s
- No backlight required, e-Paper keep displaying the last content for a long time without power
- No power adapter required
Add to Wishlist
Add to Wishlist
- Input voltage: DC12-24V
- Amp Chip: TPA3116D2
- Output impedance:4~8 ohm Speaker
- Current: ≥3A
- Output power: 80W*2
- Adopt a TPA3116D2 high-performance power amplifier chip.
- With total volume, subwoofer volume, and stereo volume control knobs.
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V
- Gray Scale: 2
- Interface: 3-wire SPI, 4-wire
- SPI Partial Refresh Time: 0.3s
- Full Refresh Time: 2s
- Refresh Power: 26.4mW(Typ.)
- Dot Pitch : 0.194 x0.194mm
Add to Wishlist
Add to Wishlist
- Supply voltage 3.3V / 5V
- Operating temperature 0~40℃
- Storage temperature -25~60℃
- Humidity range 40~70%RH
- Display resolution 152(H) x 152(V) pixel
Add to Wishlist
Add to Wishlist
- Input: 5V(DC)
- Operating current (without signal output state): less than 15 mA
- Operating current (with signal output state): less than 40 mA
- Chip: KT403A
- Chip LDO output voltage: 3.3 V
- Chip output current: 100 mA(at Max.)
Add to Wishlist
Add to Wishlist
- Working Voltage: 3.⅗V
- Working Current (@5V, 25℃)
- Standby: 25-30mA
- Recording: 29-35mA
- Playing: 110-150mA
- Working Current (@3.3V, 25℃)
- Standby: 23-25mA
- Recording: 25-30mA
- Playing: 70-150mA
- Working Temperature: 0~85℃
- Size: 40x20mm
- Weight: 31.5g
Add to Wishlist
Add to Wishlist
- Brand: Seeed Studio
- Supply voltage: 3.3V +-0.2V
- Sound Pressure Level: 140 dB SPL
- Sensitivity: -26(dB, dBFS @1kHz 1Pa)
- 6 MEMS microphones: MSM261S4030H0
- Supply current: >750mA(Full brightness)
- Range of working temperature: -30 ~ 85C
Add to Wishlist
Add to Wishlist
- Signal Type: Analog signal
- Power Supply: 3.3V/5V
- Directivity: All-round
- Sensitivity: -42dB
- S/N Ratio: 59dBA
- Frequency Range: 100Hz~8KHz
Add to Wishlist
Add to Wishlist
- Supply voltage 3.3V / 5V
- On-chip display RA
- DPI 111
- Interface UART
- Baud rate with Arduino 230400
Add to Wishlist
Add to Wishlist
- Work voltage:DC 12V-28V
- IC:TPA3118D2
- Power interface:DC 5.5*2.1mm socket
- Audio channel:2CH
- Output power:45W*2
- Input current:>3A
- Output impedance:4ohm-8ohm
Add to Wishlist
Add to Wishlist
- Module Type: TDA8932 35W
- Operating Voltage: Single DC10 ~ 30V
- Recommended Voltage: 24V
- Current: Above 2A Switching Power Supply
- Output Power: 35W x 1
- Speaker Impedance: 4-8 ohm, 8 ohm best
- Circuit configuration: Mono BTL Output
Add to Wishlist
Add to Wishlist
- Item Type: Amplifier Board
- Model: HF69B
- Supply Voltage: 5VDC or 3.7V lithium battery
- Applicable Speaker Impedance: 4 ohms, 6 ohms, 8 ohms
- Charging Interface: When using a lithium battery, the charging interface can be charged with a 5 volt power supply or a mobile phone charger to charge a single lithium battery.
Add to Wishlist
Add to Wishlist
- MP3 file format:
- support all bit rate 11172-3 and ISO13813-3 layer3 audio decoding
- Sample rate support (KHZ): 8/11.025/12/16/22.05/24/32/44.1/48
- support Normal, Jazz, Classical, Pop, Rock and other sound effects
- UART interface: standard serial port, TTL level, baud rate can be set
- Input voltage: 3.2V-5V (best 4.2V);
- Rated current: 20ma
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000