- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Sensor type: Sony IMX219 Color CMOS 8-megapixel
- Sensor size: 3.674 x 2.760 mm (1/4″ format)
- Pixel Count: 3280 x 2464 (active pixels) 3296 x 2512 (total pixels)
- Pixel Size: 1.12 x 1.12 um
- Lens: M12 customizable, telephoto to fisheye
- Angle of View: Horizontal FOV 100 degree
Add to Wishlist
Add to Wishlist
- Sensor: 5MP OV5647
- Still Picture: 2592×1944 Max
- IR sensitivity: Integral IR filter, visible light only
- Focus Type: Motorized focus
- Field of View: 54°×44° (H×V)
- Can be used in MCU, Raspberry Pi, ARM, DSP, FPGA platforms
Add to Wishlist
Add to Wishlist
- Pixel Size: 1.12um x 1.12um
- Optical Size: 1/2.4”
- Active Pixels: 5344H × 4016V
- Lens Spec: Focal length: 4.77mm, F.NO: 1.75±5%, FOV: horizontal 64deg
- IR Sensitivity: Integral IR filter, visible light only
- Focus Type: Motorized focus, programmable focus control
Add to Wishlist
Add to Wishlist
- Sensor: Monochrome global shutter OV9281
- Pixel Size: 3 μm x 3 μm
- Active array size: 1280 x 800
- Optical Size: 1/4 inch
- Focusing Range: 30mm ~ infinite
- IR Sensitive: No IR filter, sensitive to IR
- Output interface: 2-lane MIPI serial output
Add to Wishlist
Add to Wishlist
- Onboard Digital Motion Processor (DMP)
- Android support
- Auxiliary I2C interface for external sensors
- On-Chip 16-bit ADCs and Programmable Filters
- 7 MHz SPI or 400 kHz Fast Mode I²C
- Digital-output temperature sensor
- VDD operating range of 1.71V to 3.6V
- MEMS structure hermetically sealed and bonded at water level
- RoHS and Green compliant
Add to Wishlist
Add to Wishlist
- Sensor Type: 16MP IMX298
- Pixel Size: 1.12um x 1.12um
- Optical Size: 1/2.8”
- Active Pixels: 4656 H × 3496 V
- Lens Spec: Focal length: 4.04mm, F.NO: 2.0±5%, FOV: horizontal 62deg
- IR Sensitivity: Integral IR filter, visible light only
- Focus Type: Motorized focus, programmable focus control
Add to Wishlist
Add to Wishlist
- Input voltage: DC12-24V
- Amp Chip: TPA3116D2
- Output impedance:4~8 ohm Speaker
- Current: ≥3A
- Output power: 80W*2
- Adopt a TPA3116D2 high-performance power amplifier chip.
- With total volume, subwoofer volume, and stereo volume control knobs.
Add to Wishlist
Add to Wishlist
- Sensor Model: IMX477
- Sensor resolution: 4056 x 3040 pixels, 12.3MP
- Model No: M23390H08
- Focal Length: 3.9mm
- Aperture: F2.8
- Focus motor controlled via camera I2C. No hardware modification is required.
- The automated focus control: Autofocus with OpenCV examples
- The intuitive focus control: Fine-tune the focus with keyboard arrow keys.
Add to Wishlist
Add to Wishlist
- Sensor Model: IMX477
- Sensor resolution: 4056 x 3040 pixels, 12.3MP
- Model No: M23390H08
- Focal Length: 3.9mm
- Aperture: F2.8
- Focus motor controlled via camera I2C. No hardware modification is required.
- The automated focus control: Autofocus with OpenCV examples
- The intuitive focus control: Fine-tune the focus with keyboard arrow keys.
Add to Wishlist
Add to Wishlist
- Input: 5V(DC)
- Operating current (without signal output state): less than 15 mA
- Operating current (with signal output state): less than 40 mA
- Chip: KT403A
- Chip LDO output voltage: 3.3 V
- Chip output current: 100 mA(at Max.)
Add to Wishlist
Add to Wishlist
- Working Voltage: 3.⅗V
- Working Current (@5V, 25℃)
- Standby: 25-30mA
- Recording: 29-35mA
- Playing: 110-150mA
- Working Current (@3.3V, 25℃)
- Standby: 23-25mA
- Recording: 25-30mA
- Playing: 70-150mA
- Working Temperature: 0~85℃
- Size: 40x20mm
- Weight: 31.5g
Add to Wishlist
Add to Wishlist
- Brand: Seeed Studio
- Supply voltage: 3.3V +-0.2V
- Sound Pressure Level: 140 dB SPL
- Sensitivity: -26(dB, dBFS @1kHz 1Pa)
- 6 MEMS microphones: MSM261S4030H0
- Supply current: >750mA(Full brightness)
- Range of working temperature: -30 ~ 85C
Add to Wishlist
Add to Wishlist
- Signal Type: Analog signal
- Power Supply: 3.3V/5V
- Directivity: All-round
- Sensitivity: -42dB
- S/N Ratio: 59dBA
- Frequency Range: 100Hz~8KHz
Add to Wishlist
Add to Wishlist
- Work voltage:DC 12V-28V
- IC:TPA3118D2
- Power interface:DC 5.5*2.1mm socket
- Audio channel:2CH
- Output power:45W*2
- Input current:>3A
- Output impedance:4ohm-8ohm
Add to Wishlist
Add to Wishlist
- Module Type: TDA8932 35W
- Operating Voltage: Single DC10 ~ 30V
- Recommended Voltage: 24V
- Current: Above 2A Switching Power Supply
- Output Power: 35W x 1
- Speaker Impedance: 4-8 ohm, 8 ohm best
- Circuit configuration: Mono BTL Output
Add to Wishlist
Add to Wishlist
- Item Type: Amplifier Board
- Model: HF69B
- Supply Voltage: 5VDC or 3.7V lithium battery
- Applicable Speaker Impedance: 4 ohms, 6 ohms, 8 ohms
- Charging Interface: When using a lithium battery, the charging interface can be charged with a 5 volt power supply or a mobile phone charger to charge a single lithium battery.
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000