- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Model: Adafruit Assembled Data Logging shield
- SD card interface: FAT16 or FAT32
- Onboard regulator: 3.3 V
- Real time clock (RTC) keeps the time going even when the Arduino is unplugged
Add to Wishlist
Add to Wishlist
- Power Supply:5 V
- Output Current:800mA
- Dimension:60x56x20 mm
Add to Wishlist
Add to Wishlist
- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5mm
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
Add to Wishlist
Add to Wishlist
- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5mm
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
Add to Wishlist
Add to Wishlist
- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5mm
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
Add to Wishlist
Add to Wishlist
- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5mm
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
Add to Wishlist
Add to Wishlist
- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5mm
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
Add to Wishlist
Add to Wishlist
- Product Name: 6V Battery Case With On/Off Switch
- Type: Wire Lead Type
- Fit Battery Model: CR2032
- Available Battery Quantity: 2
- Material: Plastic, Metal
- Outside Diameter: 32.5mm
Add to Wishlist
Add to Wishlist
- Model: CR2032 holder
- Color: Black
- Material: Plastic
- Size: 23 x 18 x 5mm
- Weight: 1 gm
- Easy to install
Add to Wishlist
Add to Wishlist
- 168 dB maximum link budget.
- +20 dBm – 100 mW constant RF output vs.
- +14 dBm high-efficiency PA.
- Programmable bit rate up to 300 kbps.
- High sensitivity: down to -148 dBm.
- Bullet-proof front end: IIP3 = -12.5 dBm.
- Excellent blocking immunity.
- Low RX current of 10.3 mA, 200 nA register retention.
- Fully integrated synthesizer with a resolution of 61 Hz.
- FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
- Built-in bit synchronizer for clock recovery.
- Preamble detection.
- 127 dB Dynamic Range RSSI.
Add to Wishlist
Add to Wishlist
- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5mm
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
Add to Wishlist
Add to Wishlist
- Simple design, an adapter board combined use with Xbee products.
- Adapter the Xbee 20-pin to dual-row pins with 0.1-inch standard spacing (dual rows with 0.5-inch distance).
- Identifies the pin with the corresponding screen print.
- Free soldering to the board with female socket
Add to Wishlist
Add to Wishlist
- Cell Quantity: 4.
- Battery type: AAA
- Storage temperature: 25ºC.
- Max Operate temperature: 80ºC.
Add to Wishlist
Add to Wishlist
- Cell Quantity: 2.
- Battery type: AA
- Storage temperature: 25ºC.
- Max Operate temperature: 80ºC.
Add to Wishlist
Add to Wishlist
- Lightweight
- Convenient to carry this battery box holder with wires
- suitable for 1 x AA batteries With spring clip design
- Weight(g):8
Add to Wishlist
Add to Wishlist
- Holds 4 AA batteries
- With a cover and Locking
- Comes with an ON/OFF switch
- Cable length: 15cm
- USB Plug
- Internal Connection: Series.
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000