- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Model: Adafruit Assembled Data Logging shield
- SD card interface: FAT16 or FAT32
- Onboard regulator: 3.3 V
- Real time clock (RTC) keeps the time going even when the Arduino is unplugged
Add to Wishlist
Add to Wishlist
- Power Supply:5 V
- Output Current:800mA
- Dimension:60x56x20 mm
Add to Wishlist
Add to Wishlist
- Supply voltage (V):9
- DC jack Size (mm):2.1
- Length of Cable (cm):10
- Length (mm):160
- Width (mm):26
- Height (mm):9
- Weight (gm):7
- Cable Length (cm):10
- Shipment Weight:0.01 kg
- Shipment Dimensions:5 × 5 × 3 cm
Add to Wishlist
Add to Wishlist
- 168 dB maximum link budget.
- +20 dBm – 100 mW constant RF output vs.
- +14 dBm high-efficiency PA.
- Programmable bit rate up to 300 kbps.
- High sensitivity: down to -148 dBm.
- Bullet-proof front end: IIP3 = -12.5 dBm.
- Excellent blocking immunity.
- Low RX current of 10.3 mA, 200 nA register retention.
- Fully integrated synthesizer with a resolution of 61 Hz.
- FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
- Built-in bit synchronizer for clock recovery.
- Preamble detection.
- 127 dB Dynamic Range RSSI.
Add to Wishlist
Add to Wishlist
- Designed for heavy-duty.
- High Power Application.
- Handy for charging the batteries.
- Male XT60 on one end.
- Female T-Plug on the other end.
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Use this adapter to power a stand-alone BEC, an electronic accessory such as a cooling fan, LED lights etc.
Add to Wishlist
Add to Wishlist
- Connector: T connector (Female) and Flat Connector (Female)
- Cable Length (cm):13
- Color: Black and Red
Add to Wishlist
Add to Wishlist
- Dimensions: 40 cm.
- Weight: 25 gm.
- Connector Type: Banana Plug and T-Connector male.
- Wire Gauge: 18AWG Silicone Line.
- Long-life gold connectors at both ends.
- Flexible and temperature-resistant silicone wires.
Add to Wishlist
Add to Wishlist
- Simple design, an adapter board combined use with Xbee products.
- Adapter the Xbee 20-pin to dual-row pins with 0.1-inch standard spacing (dual rows with 0.5-inch distance).
- Identifies the pin with the corresponding screen print.
- Free soldering to the board with female socket
Add to Wishlist
Add to Wishlist
- Great for adapting your XT60 batteries for use with chargers/ESCs that don’t provide an XT60 adapter
- The quick, easy and affordable solution for your mismatched connector
- Saves you money and soldering time
- Use to convert your battery’s XT60 connector to a XT90 connector
- Great for use with RC planes, helis, cars, and trucks
Add to Wishlist
Add to Wishlist
- Cable Length: 10 cm
- Gender: Male
- Easy to use
- Flexible neck for longer life
Add to Wishlist
Add to Wishlist
- Product: Adapter Cable
- Color: Red & Black
- Light Weight
- High quality
Add to Wishlist
Add to Wishlist
- Input Connector: 4.0mm Banana Plug
- Output Connector: XT60/T/XT30/JST/DC5.5 2.1 Goggles Plug
- Wire Length: 20cm
- Wire Gauge: 16AWG
- Rated Temperature: -60°C~+200°C
Add to Wishlist
Add to Wishlist
- Input Connector: XT60 Plug
- Output Connector: XT60/T/XT30/JST/DC5.5 2.1 Goggles Plug
- Wire Length: 20cm
- Wire Gauge: 14 AWG
- Rated Temperature: -60°C~+200°C
Add to Wishlist
Add to Wishlist
- Connector: AS150U
- Gender: Female
- Instantaneous current: 140A
- Current Rating: 70A
- Contact resistance: 0.40mΩ
- Rated voltage: DC 500V
- Flame retardant rating: UL94 V0
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000