- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- FPGA: Intel® Cyclone® 10CL016
- PCI: Mini PCI Express port with programmable pins
- Camera Connector: MIPI camera connector
- Microcontroller: SAMD21 Cortex®-M0+ 32bit low power ARM MCU
- Radio module: u-Blox NINA-W102 (datasheet)
- Board Power Supply :(USB/VIN) 5V
- All pins are PWM pins
- MIPI camera connector
- Mini PCI Express port with programmable pins
- Full-Speed USB Device and embedded Host
Add to Wishlist
Add to Wishlist
- Microcontroller: SAMD21 Cortex-M0+ 32bit low power ARM MCU
- Board Power Supply (USB/VIN): 5V
- Supported Battery(*): Li-Po single cell, 3.7V, 700mAh minimum
- DC Current for 3.3V Pin: 600mA
- Comes with a micro SD card holder
Add to Wishlist
Add to Wishlist
- Input voltage range: 55.5V
- Charging cut-off voltage: (4.2V/4.35V) ±0.5%:
- Charging current: 2.4A±5%
- Boost output voltage: 5V5.15V (wire loss compensation)
- Boost output voltage ripple: 100mV
- Weight:3 gm
Add to Wishlist
Add to Wishlist
- Input Voltage: 1.5V to 5V DC
- Output Voltage: 3.3V DC
- Dimensions (L x W)mm: 11 x 7
Add to Wishlist
Add to Wishlist
- Module model: SZ-BT07CCCV-D1
- Dimensions: 130mm x 50mm x 74mm
- Input voltage: DC10-60V
- Input current:
- 10-30V input voltage, maximum current 30A
- 31-60V input voltage, maximum current 25A
- Static working current: 15mA
- Output voltage:
- 12-90V continuously adjustable (default output is adjusted to 19V)
- 12-90V fixed output
Add to Wishlist
Add to Wishlist
- VCCA Voltage Range: 1.2V-3.6V
- VCCB Voltage Range: 1.65V-5.5V
- Conditions of Use: VCCB>VCCA
- Working Current: 30uA
- Support Port: push-pull, open-drain
- Conversion Speed: push-pull 60Mbps(MAX)open-drain 2Mbps(MAX)
Add to Wishlist
Add to Wishlist
- Input Voltage:2.5V~VOUT-0.5V
- Output Voltage: can be set to 5V/8V/9V/12V
- The maximum output current reaches 1A.
- Low power consumption.
- The LED indicator can be turned off by the pad next to it.
Add to Wishlist
Add to Wishlist
- Product: DC Conversion Power Module
- Input Voltage Range:2.8V-5.5V
- Output Voltage:+/-12V (V +:+12V;V-:-12V)
- Output Current:+12V stable output current capability of 50mA,-12V stable output current capability 30mA,almost meet all ADC, DAC and amplifier applications
- Size:2.4×1.2cm
Add to Wishlist
Add to Wishlist
- Model: XL6019
- Product: Adjustable Boost Power Supply Module
- Input Current: 5A (MAX)
- Input Voltage: DC 3-35 V Switching
- Working Temperature: Industrial (-40 ° C to + 85 ° C)
- Negative Output Voltage: DC 5-40V (Adjustable)
- Frequency: 220 kHZ
Add to Wishlist
Add to Wishlist
- Model: XH-M411
- Input Voltage: 3V-35V
- Output Voltage: 5V-45V
- Input Current: 5A(Peak)
- Voltage Display Range: 5V-30V(if the input voltage is lower than 4.5V, it will not display)
- Voltage Display Error: ±0.1V
- Size: 72*48*16mm
Add to Wishlist
Add to Wishlist
- Shorter Time-To-Market
- Give new life to existing products
- Add connectivity for monitoring and control
- Tailor it to your need, each I/O pin can be configured
- Make equipment smarter to be ready for the AI revolution
Add to Wishlist
Add to Wishlist
- Voltage : Input through (USB) DC 5V
- Output via (DC Round Pin) : DC 12V
- Cable Length: 1 meter / 2 meter
- Color: BLACK
- Input / Output Current: Maximum input 1
Add to Wishlist
Add to Wishlist
- Microcontroller: ATmega328P
- Circuit operating voltage: 5V
- The input voltage ranges from 6v to 20V
- Digital I/O Pins: 14
- Analog i/p pins are 6.
- 1 kb of EEPROM memory
- USB connector: USB-C
Add to Wishlist
Add to Wishlist
- ATmega32U4 Microcontroller
- Input Voltage: 7-12V
- 20 Digital I/O Pins
- micro USB connection
Add to Wishlist
Add to Wishlist
- 14 digital inputs/outputs, including 6 PWM inputs
- 6 analog inputs
- 1 ICSP connector
- 1 revised and corrected reset circuit
Add to Wishlist
Add to Wishlist
- Microcontroller: 64 MHz Arm® Cortex M4 (nRF52832)
- Connectivity: Bluetooth® 4.2
- Interface: USB interface with debug functionality
- Tiny size, packed with features
- Low power consumption
- Add sensing capabilities to existing projects
- Weight: 2g
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000