- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Operating voltage: 12V
- Current requirement: 1A-2A
- Rated power: 6-7W
- HDMI input: version HDMI 1.1
- VGA input: 1280×800 physical resolution
- Brightness: 350 lumens
- Panel type: TFT
- Display Type: Capacitive Touch Display
- Number of wiring: 40 PIN LVDS
- Backlight: LED
Add to Wishlist
Add to Wishlist
- LCD Type : TFT
- LCD Interface: SPI
- Touch Screen Type: Resistive
- Touch Screen Controller: XPT2046
- Colors: 65536
- Backlight: LED
Add to Wishlist
Add to Wishlist
- Power Requirements:D.C.+5V ( Maximum 100mA, typical 70mA, 50mV peak to peak maximum ripple)
- Interface:USB 1.1
- Operating Temperature:0 to 50 ℃
- Storage Temperature:-40 to 80 ℃
- Relative Humidity:95% at 60 ℃
- Supports operations systems including Windows 8, Windows 7, Windows 98, 2000, NT4, Me, XP, XP Tablet Edition, CE 2.12, CE 3.0, CE.net, Linux, DOS & iMac
Add to Wishlist
Add to Wishlist
- Lcd Type: TFT
- Lcd Interface: SPI
- Touch Screen Type: Resistive
- Touch Screen Controller: XPT2046
- Colors: 65536
- Backlight: LED
Add to Wishlist
Add to Wishlist
- Display Size:7 inches
- Resolution:800×480
- Display Port:DSI
- Touch Type:Capacitive
- Touch Points:5 Points
Add to Wishlist
Add to Wishlist
- Microcontroller SAM D21
- Operating Voltage USB 5V
- Power Input Port USB Type C
- JST2.0 Lipo Battery
- SRAM 32 KBFlash 256 KB
- Recoverable fuse Protection current 1A
- Battery Charge Current 400 mA
Add to Wishlist
Add to Wishlist
- Display Size:7 inches
- Resolution:1024×600,
- Display Port:DSI
- Touch Type:Capacitive
- Touch Points:5 Points
Add to Wishlist
Add to Wishlist
- 7inch IPS display with capacitive touch panel, hardware resolution is 1024 x 600
- Capacitive touch, supports up to 5-points touch
- Toughened glass capacitive touch panel, 6H hardness
- DSI interface, refresh rate up to 60Hz.
Add to Wishlist
Add to Wishlist
- Raspberry Pi Capacitive Touch Display
- Resolutions: 800×480
- Size: 5inch
- Display port: DSI
- Power Consumptions: Low power
- Touch Type: Capacitive
Add to Wishlist
Add to Wishlist
- Power input: 5V
- CM4 socket: suitable for all variants of Compute Module 4
- USB: USB 2.0 × 1
- Connector: MIPI CSI 22PIN 0.5mm camera connector
- Fully laminated touch screen. 2.8″ display with 5-point capacitive touch control, better touch experience from the fully laminated screen, together with 6H toughened glass panel, safer to use.
Add to Wishlist
Add to Wishlist
- Display: 2.8 inch IPS
- Resolution: 480×640
- Viewing Angle:160°
- Touch Port: I2C
- Refresh rate: 60Hz.
Add to Wishlist
Add to Wishlist
- Input power: 5V
- CM4 Socket: suitable for all variants of Compute Module 4
- Networking: Gigabit Ethernet RJ45 connector
- M.2 M Key: supports NVME SSD
Add to Wishlist
Add to Wishlist
- Product: STM32L152C-DISCO Evaluation Board, STM32L152RC MCU
- Board power supply: 3.3 or 5 V supply voltage
- EEPROM: 4KB
- RAM: 16 KB
Add to Wishlist
Add to Wishlist
- Product: MICROCHIP ATSAMD21-XPRO Evaluation Kit
- Digital input and output
- Two mechanical buttons (user and reset button)
- One user LED and three possible power sources
Add to Wishlist
Add to Wishlist
- Product: NXP LPC845-BRK Development Board, LPC84x Series MCUs
- LPC845 in the QFN48 package
- On-board CMSIS-DAP debug interface
- Red, Green and Blue user LED
- Capacitive Touch evaluation button
Add to Wishlist
Add to Wishlist
- Product: NUCLEO-L011K4 Development Board
- STM32L011K4T6 microcontroller in an LQFP32 package
- ST-LINK/V2-1 debug/programmer tool on-board
- ARM® mbed Enabled™
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000