- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x62 mm
- Weight:8 gm
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x700 mm
- Weight:3 gm
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x62 mm
- Weight:7 gm
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x150 mm
- Weight:11 gm
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x150 mm
- Weight:10 gm
Add to Wishlist
Add to Wishlist
- Frequency:5.8 GHz
- Impedence:50Ω
- Dimension:15x18x150 mm
- Weight:13 gm
Add to Wishlist
Add to Wishlist
- Good Quality material
- 96-230Vac operating input range
- 50,000 hours MTBF
- 6-month warranty.
- Input Current: 0.5A maximum
- Input Power consumption (no load): 0.075W maximum
- USB-C connection goes straight into your Raspberry Pi
Add to Wishlist
Add to Wishlist
- 1.5 Meter Cable lead
- Micro USB Connector
- Input: 90~264 V AC @47/63 Hz
- Output: 5.2V, 2.5A
- Interchangeable heads for different countries
- 50,000 hours MTBF
Add to Wishlist
Add to Wishlist
- Output voltage: +8.0V DC
- Minimum load current: 0.01A
- Nominal load current: 6.0A
- Maximum power: 48.0W
- Load regulation: ±5%
- Line regulation: ±5%
Add to Wishlist
Add to Wishlist
- Designed for 915mhz but works fine on 868mhz too
- Weight: 0.9g
- ~40mm stem
- ~55mm wide top segment (not RF elements)
- Works great with the TBS Crossfire Nano Rx
Note: This is not an original TBS product, but a high-quality clone of one.
Add to Wishlist
Add to Wishlist
- Fully compatible with High-Speed HDMI with Ethernet specification (Version 1.4).
- A superb cable with excellent audio-visual transfer properties that deliver signal without compromising purity and balance.
- Nickel-plated connectors for highest signal transfer rate and resistance in corrosion.
- A large gauge PVC jacket provides maximum shielding against wear and tear and extreme temperatures.
- Reinforced quad-layer braided shielding and Mylar-foil shielding provides utmost protection against RF and EM interference.
- Supports 480i, 480p, 720p, 1080i, 1080p, 1440p and 4K@60p resolution HDMI plug to HDMI plug leads
- Compatible with Raspberry Pi 4 Model B and all previous Raspberry Pi models
Add to Wishlist
Add to Wishlist
- Nickel Plated Connector Pins
- Fully triple shielded for increased noise immunity
- Length: 10cm
- 4Kp60 compliant
- 20Mohm 300VDC insulation withstands 300VDC for 0.1s
- Compatible with: Raspberry Pi Zero; Raspberry Pi Zero W; Raspberry Pi Zero W2
Add to Wishlist
Add to Wishlist
- Specially designed for VTX/RX for long range FPV
- Omnidirectional (compatible with video TX/RX)
- Directional Diagram: all-around( Omnibearing)
- Polarization:Circular polarization Right-handed(RHCP)
- Greatly increases video and audio signal.
Add to Wishlist
Add to Wishlist
- Can be used for All development Board with C type port for 5V@3A supply
- Supports Reversible plug orientation
- Simple Plug and Play device, no driver software required.
- Supports High-speed data transfers
- Can be Use for Mobile and Tablets with Fast Charging support
- Compact and Light Weight
Add to Wishlist
Add to Wishlist
- Model: ROTG01 (UVC OTG FPV Receiver)
- Connector Type: SMA Female (Antenna)
- Current consumption: 200 mA
- Length of Antenna: 11 cm
- No. of Channels: 150
Add to Wishlist
Add to Wishlist
- Product: Triple Feed Patch 5.8GHz Antenna SMA
- Center frequency: 5.8 GHz
- Bandwidth: 660 MHz (5.47 – 6.13 GHz)
- Matching: S11 < -20 dB, VSWR < 1.22 (at center frequency)
- Axial ratio: < 1.3
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000