Features:

1. easy to use
2. Cost Effective
3. small in Size
4. Compatible with any Charger pin
5. Can be Use for Mobile and Tablets with Fast Charging support
6. Supports High-speed data transfers

Packages Includes:

1 x Micro USB-B (Female) to USB Type C (Male) Converter Adapter for Raspberry Pi 4-White

Dedicated 3007 Cooling Fan For Raspberry Pi Compute Module 4 CM4, Low Noise, With Thermal Tapes, 5V/12V Power Supply(Optional)

Features:

1. Low Noise, With Thermal Tapes
2. Low-profile, PWM speed adjustment
3. 4-wire PWM speed-adjustable fan header

Specifications: 

1. Rated Power: 1W (5V, 0.2±0.02A) 1.62W (12V, 0.135±0.02A)
2. Rated Speed: 5000±10%RPM 8000±10%RPM
3. General Low-profile, PWM speed adjustment
4. Interface: 4-wire PWM speed-adjustable fan header
5. Cable Length: 90±10mm
6. Dimension: 54×39×13mm

Package Includes:

1 x Waveshare Dedicated 3007 Cooling Fan for Raspberry Pi Compute Module 4 CM4, Low Noise, 5V

This is the 2.7mm Wide Angle Lens, an add-on for the M12 Raspberry Pi High-Quality Camera. It has a wide field of view and a variety of uses, like CCTV applications, or of course, cat photos. Includes a thumbscrew to quickly and easily assemble onto the HQ Camera Board.

Wide-angle lenses are good for getting shots of a big area, wildlife cameras, security cameras, doorbell cams, etc. The video may be distorted around the edges to fit it all into the sensor.

For use with the M12 Raspberry Pi High-Quality Camera only. We also carry a 25mm 5MP Telephoto Lens.

Features:

1. Easy to use
2. Compact design
3. Low power consumption
4. High signal-to-noise ratio (SNR)
5. Built-in 2D Dynamic Defect Pixel Correction (DPC)
6. Phase Detection Autofocus (PDAF) for rapid autofocus

Specifications:

1. Model: Model
2. Resolution: 12M
3. Focal length: 2.7mm
4. Aperture (F/NO): 2.8
5. Back focus length: 4.97mm
6. DISTORTION: <-1.5%
7. Mount: M12*P0.5
8. Operating temperature:  -30 ~ +70°C
9. Construction: 5G2P+IR
10. Weight: 6g

Packages includes:

1  x  Official Raspberry Pi 12MP 2.7MM Wide-angle lens

RP2040 is the debut microcontroller from Raspberry Pi. It brings our signature values of high performance, low cost, and ease of use to the microcontroller space. With a large on-chip memory, symmetric dual-core processor complex, deterministic bus fabric, and rich peripheral set augmented with our unique Programmable I/O (PIO) subsystem, it provides professional users with unrivaled power and flexibility.

Flexible I/O connects RP2040 to the physical world by allowing it to speak to almost any external device. High-performance breezes through integer workloads. Low cost helps ease the barrier to entry.

This isn’t just a powerful chip: it’s designed to help you bring every last drop of that power to bear. With six independent banks of RAM and a fully connected switch at the heart of its bus fabric, you can easily arrange for the cores and DMA engines to run in parallel without contention.

RP2040 builds Raspberry Pi’s commitment to inexpensive, efficient computing into a small and powerful 7 mm × 7 mm package, with just two square millimeters of 40 nm silicon.

With detailed documentation, a polished MicroPython port, and a UF2 bootloader in ROM, it has the lowest possible barrier to entry for beginner and hobbyist users. RP2040 is a stateless device, with support for cached execute-in-place from external QSPI memory.

This design decision allows you to choose the appropriate density of non-volatile storage for your application, and to benefit from the low pricing of commodity Flash parts. RP2040 is manufactured on a modern 40nm process node, delivering high performance, low dynamic power consumption, and low leakage, with a variety of low-power modes to support extended-duration operation on battery power.

Read more about RP2040 on Raspberry Pi Official Page Click Here

Key Features and Specifications:

1. Dual ARM Cortex-M0+ @ 133MHz
2. 264kB on-chip SRAM in six independent banks
3. Support for up to 16MB of off-chip Flash memory via a dedicated QSPI bus
4. DMA controller
5. Fully-connected AHB crossbar
6. Interpolator and integer divider peripherals
7. On-chip programmable LDO to generate a core voltage
8. 2 on-chip PLLs to generate USB and core clocks
9. 30 GPIO pins, 4 of which can be used as analog inputs
10. Peripherals:
    ◦ 2 UARTs
    ◦ 2 SPI controllers
    ◦2 I2C controllers
    ◦16 PWM channels
    ◦USB 1.1 controller and PHY, with host and device support
    ◦8 PIO state machines
11. Whatever your microcontroller application, from machine learning to motor control, from agriculture to audio, RP2040 has the performance, feature set, and support to make your product fly.

For detailed technical specifications about the product, download the datasheet in the attachment 

Package Includes:

1 x RP2040 Microcontroller IC by Raspberry PI-REEL of 500

After a long wait of almost 7 years, the Raspberry Pi released the camera-3 series, the successor to the Camera module 2 series. This newest addition to the Raspberry Pi mainstream camera lineup replaces the wildly successful Camera Module 2, which was introduced in April 2016.

The all-new Raspberry Pi Camera Module 3 Standard/Wide is a camera for Raspberry Pi computers. Featuring autofocus and a 12-megapixel sensor supported by Raspberry Pi’s Picamera2 Python library, Camera Module 3 gives you excellent image quality with precise control.
Camera Module 3 came up with significant improvements over Camera Module 2, which is built around a 12-megapixel Sony IMX708 image sensor. Additionally, Camera Module 3 is offered with a normal (76°) or wide-angle (120°) lens, as well as in regular and infrared-sensitive (NoIR) versions.

• The standard variant is designed to take pictures in normal light.
• The NoIR variant doesn’t have an infrared filter, so you can use it together with an infrared light source to take pictures in the dark.

Features and Specifications:

• Back-illuminated and stacked CMOS 12-megapixel image sensor (Sony IMX708)
• High signal-to-noise ratio (SNR)
• Built-in 2D Dynamic Defect Pixel Correction (DPC)
• Phase Detection Autofocus (PDAF) for rapid autofocus
• QBC Re-mosaic function
• HDR mode (up to 3-megapixel output)
• CSI-2 serial data output
• 2-wire serial communication (supports I2C fast mode and fast-mode plus)
•  2-wire serial control of focus mechanism
• Improved low-light sensitivity.
• High dynamic range (HDR) support.
• Sony IMX708 12MP sensor with 12C-controlled focus actuator
• Large 7.4mm diagonal sensor
• Resolution: 12 Megapixel
• Diagonal Viewing Angle: 76º
• Compatible with all models of Raspberry Pi*

*Note: To connect with Raspberry Pi Zero models this camera requires a special camera cable. Buy Now

Package Includes:

1 x Raspberry Pi Camera Module 3 Wide

All Variants:

The raspberry Pi Official Power Supply is an official and recommended universal micro USB power supply for Raspberry Pi. Before importing we’ve tested the samples of this power supply in all kinds of situations, and it has passed all our lab tests. Manufactured by one of the third party manufacturers It is a specially designed power supply to keep feeding your Pi the steady 2.5A it needs for proper performance. With official Raspberry Pi’s logo engraved on the case, it follows all standards set by Raspberry Pi officials.

This Raspberry Pi Official Power Supply comes with four different plug adapters with these you can plug it to any country type AC power out plug.

Features: 

1. 1.5 Meter Cable lead.
2. Micro USB Connector.
3. Interchangeable heads for different countries.
4. Short circuit, over-current and over-voltage protection.
5. 50,000 hours Mean time between failure (MTBF).

Package Includes:

1 x Raspberry Pi Official Power Supply.