- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Charges batteries in pairs.
- Charge time 0.75 up to 4 hours.
- 240 minutes.
- Charging indicators.
- Bad cell detection.
Add to Wishlist
Add to Wishlist
- Microcontroller Chip: RP2040
- Flash Memory:16 MB
- SRAM:264 KB
- Weight:7 gm
Add to Wishlist
Add to Wishlist
- Microcontroller chip: Arm® Cortex®-M4F Microcontroller
- Power Supply: Regulated 3.3 V
- Clock Frequency:80 MHz
- SRAM:512 KB
- Weight:6 gm
Add to Wishlist
Add to Wishlist
- Input Voltage (V):5V
- Maximum Voltage(V):6V
- USB Type:USB 2.0
- Flash Memory:32 KB
- Dimension:35x17x4 mm
- Weight:3 gm
Add to Wishlist
Add to Wishlist
- Compatible With: BBC Micro: Bi
- Accessory Type: Extension Board
- 5V 1A supply for the greater driving force
- 3.3V and 5V interface
- Support 3V5V sensor module
- Micro: bit all pins lead
- 3.5mm audio connector
- Builtin buzzer (switch switching)
- 5V 1A self-recovery fus
Add to Wishlist
Add to Wishlist
- Interface voltage: 5V
- LED light: 5V power indicator
- Support software: Makecode / kittenblock
- 4P pin header, 5VI2C DuPont line module interface
Add to Wishlist
Add to Wishlist
- AC Input Voltage:100-240V 50/60Hz
- Output Voltage:12V/24V
- Output Current:12V10A&24V5A
- Output Volt under No Load:27.6V
- Minimum Start Volt: >9.0V
- Input Power with Load: MAX.120W
- Input Power under no Load:2.8W
- Dimension:158x90x50mm
Add to Wishlist
Add to Wishlist
Case Material: Plastic
Case Size:112x75x38mm
Weight:357.7g
Add to Wishlist
Add to Wishlist
- Supply Voltage 11-18V
- Compatible Lithium battery: 1-6Cells
- Lithium iron battery 1-6Cells
- NICD / NIMH 1-15Cells
- Maximum charge power 80W
Add to Wishlist
Add to Wishlist
- Compact, easy-to-use charger
- Suitable for 2S-4S LiPo cells and 6-8 NiMH cells.
- Connects directly to the wall outlet at a voltage range of 100 V to 240 V
- Suitable for LiPo and NiMH batteries
- Charge status indicator
Add to Wishlist
Add to Wishlist
- Intuitive Operation Interface
- LCD Display: for real-time charging data at a glance! During the charging process,
- High Performance with Dual Channels: With maximum charging power of 1500W.
- Compatibility of CAN: PC1500 charger is with built-industry CAN Bus communication. Smart batteries and lithium batteries with balance ports can be charged.
- Better Protection with Conformal Coating: Anti-corrosion paint is applied to protect the key circuit’s electronic components from extreme environments like moisture, mildew, and smoke corrosion. The charger’s reliability and stability are ensured for outdoor work.
Add to Wishlist
Add to Wishlist
- Supports 6s LiPo battery Adjustable charge current from 1.0 to 20.0A
- The charger can store the charge current of the last charge program
- LED digits on indicate charge/discharge status
- Two working modes: balance charge mode and storage mode
Add to Wishlist
Add to Wishlist
- Model: G700-54.60-10
- Input: 170Vac – 300Vac
- Output: 54.6V
- Current: 10A
- Connector: XT60 Connector
Add to Wishlist
Add to Wishlist
- Model: G500-54.60-06
- Input: 170Vac – 300Vac
- Output: 54.6V
- Current: 6A
- Connector: XT60 Connector
Add to Wishlist
Add to Wishlist
- Model No: G700-54.60-10
- Input: 170Vac – 300Vac
- Output: 42V
- Current: 10A
- Connector : XT60 Connector
Add to Wishlist
Add to Wishlist
- Constant Charging Voltage: 25.5V
- Constant charging current: 10A
- Net Weight: 910 gm
- Color: Light Grey
- Output Connector: XT60 Male
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000