- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- User name and model setup can be saved (up to 15 aircraft)
- RSSI and Telemetry
- Adjustable display brightness and contrast
- Multiple alarms
- Servo reversing and end-point adjustment
- Adjustable servo travel limit (prevents pushrod jamming)
Add to Wishlist
Add to Wishlist
- Operating Voltage (VDC):7.4-12 V
- No of channels:12
- User name and model setup can be saved (up to 15 aircraft)
- RSSI and Telemetry
- Adjustable display brightness and contrast
- Multiple alarms
Add to Wishlist
Add to Wishlist
- Model: R9 STAB OTA
- Numbers of Channel: 8/16CH (CH16 outputs RSSI)
- Operating Voltage: DC 3.5V~10V
- Operating Current: 140mA@7.4V
- Measuring range of gyroscope: ±2000dps
- Measuring range of acceleration: ±4g
Add to Wishlist
Add to Wishlist
- Open-source operating system
- Default Operating Mode: Mode 2 (Left-Hand Throttle).
- This Remote comes with 2 x 18650 battery holder for power supply
- It is also compatible with a 2S battery with 3pin JST (XH) connector ( Battery Slot size is 92 x 57 x 18 mm (L x W x H)
- Installed with ACCESS protocol
- High-speed module digital interface
- Supports spectrum analyzer function
- Supports wired training function
- Haptic vibration alerts and voice speech outputs
Add to Wishlist
Add to Wishlist
- Model: Frsky R9 M Lite Pro Receiver
- Channel: 16CH
- Supports: Spectrum analyzer
- RF Operating Frequency: 868MHz / 915MHz
- RF Power (Non-LBT): 10mW / 100mW / 500mW / 100mW~1W
Add to Wishlist
Add to Wishlist
- Compatibility: ACCST D16 and ACCESS receivers Communication Protocol:ACCST D16 /ACCESS Feel Free to Choose
- Classic Taranis form factor design Easy launch momentary button
- Program navigation button High-speed module digital interface
- Installed with ACCESS protocol Supports spectrum analyzer function
- Supports SWR indicator warning G9D potentiometer gimbal Supports wired training function
Add to Wishlist
Add to Wishlist
- Input power: 4.0-6.5V DC
- Channels: 6 Channels
- Frequency range: 2.4~2.5 GHz
- Bandwidth: 500KHz
- RF receiver sensitivity: -105dbm
- Modulation: GFSK
Add to Wishlist
Add to Wishlist
- Output: Continuous 40A, Burst 60A up to 10 Secs.
- Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.
- BEC: 3A / 5V (Switch mode).
- Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: Brushless Motor)
Add to Wishlist
Add to Wishlist
- Output: Continuous 60A, Burst 80A up to 10 Secs.
- Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.
- BEC: Pentium-60A: 3A / 5V (Switch mode).
- Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: Brushless Motor)
Add to Wishlist
Add to Wishlist
- Support High Voltage (HV) Receivers
- Input voltage: 3.7V-27V
- Max current: 30A
- 18AWG silicone cable
- JST Plug
- Cable length 20cm
- Weight: 11g – With LED indicator lamp
Add to Wishlist
Add to Wishlist
- Material: Aluminum alloy
- Applicable models: for Mavic Air/Mavic Mini/, Mavic 2 Pro Zoom.
- Colour: Black, Red
- Net weight: 3.6g (1 pair)
- Product size: 2*1cm (single)
Add to Wishlist
Add to Wishlist
- Channel: 4CH
- Weight: 2.2g
- Resolution: 1024
- PWM Output: Yes
- Operating Voltage: 3.5-10V
- Current: 50MA
- Antenna Length: 100mm
- Control Range: >500M+
- Compatibility: Compatible with Frsky X9D (D8 Mode), XJT (D8 Mode), DJT, DFT, DHT
Add to Wishlist
Add to Wishlist
- RX lead length:100mm
- Power in/out lead length:100mm (each)
- Switching load current (DC):5A (Continuous current)
- Input Voltage (DC):5-28V
Add to Wishlist
Add to Wishlist
- Continuous Current: 40A
- Burst Current: 55A (10 Sec.)
- BEC Mode: Linear Mode, 5V@3A
- Programmable: Yes
- Battery cell : Li-PO / NiMH
Add to Wishlist
Add to Wishlist
1 Output: Continuous 80A, Burst 100A up to 10 seconds.
2 Input Voltage: 2-6S Lipo, 5-18 cells NiMH.
3 BEC: 5A / 5V Switch mode BEC.
4 Refresh rate of the throttle signal: 50Hz to 432Hz.
5 Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.
(BLM = BrushLess Motor)
Add to Wishlist
Add to Wishlist
- Output: Continuous 50A
- Burst 65A up to 10 seconds.
- Input Voltage: 2-4S Lipo, 5-12 cells N
- BEC: 5A / 5V Switch mode BEC.
- The refresh the rate of the throttle signal: 50Hz to 432
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000