- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Supports 3-6S Lipo input
- 35A continuous current, 50A burst
- MCU: STM32F745 32-bit processor
- IMU: ICM20689 (SPI)
- Barometer: BMP280
- Current Sensor: Approximately 130 amps maximum measurable value
- Supports Betaflight, Butterflight, and Cleanflight.
Add to Wishlist
Add to Wishlist
- Operating voltage range:1.71V to 3.6V
- Power consumption @ 1.8V:0.55 mA (High) ,0.26 mA(Low)
- Smart FIFO up to 9 Kilobyte based on features set
- Embedded temperature sensor:16 bit
Add to Wishlist
Add to Wishlist
- LSM303D 6DoF Motion Sensor
- ±2/±4/±8/±12 gauss magnetic scale
- ±2/±4/±6/±8/±16 g linear acceleration
- 16-bit data output
- 3.3V or 5V compatible
- I2C interface, with address select via ADDR cuttable trace (0x1D or 0x1E)
- Reverse polarity protection
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V-5.5V
- Low Power Consumption
- High Accuracy
- I2C Communication
- Small Size
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V~5V
- Operating Current: 8~10uA
- Interface: Gravity-I2C
- I2C Address: 0x19 (default) / 0x18 (optional)
- User-selectable Scale: ±2g/±4g/±8g/±16g
- Operating Temperature: -40℃~+85℃
Add to Wishlist
Add to Wishlist
- Working Voltage: 3.3~5V
- Communication: Digital
- Connector: Gravity
Add to Wishlist
Add to Wishlist
Voltage: 1~2s LiPoly (3.2~8.4V)
RF: Supports DSM/DSM2/DSMX
Software: Naze32 BRUSH
Size: 32.5 x 22 x 1.2mm
Weight: 3g
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
- Material: super soft silicone.
- Color Function JST-SH Pin Servo connector plug.
- Total Cable length: 15cm
Add to Wishlist
Add to Wishlist
- The volume of about 50 dB.
- Interface: 1.25-2P plug.
- Connector: DF13 Plug
- Wire length: 190mm
- Size: Dia 30mm
Add to Wishlist
Add to Wishlist
- 3-axis gravity accelerometer and 3-axis gyroscope
- On-chip temperature sensor
- Communication protocol I2C:0x68
- Accelerometer noise 100 μg/√Hz
- Gyroscope sensitivity error 1%
- Gyroscope noise ±4 mdps/√H
Add to Wishlist
Add to Wishlist
- 32bit STM32F427 Cortex M4 core with FPU
- 168MHz
- 256KB RAM
- 2 MB Flash
Add to Wishlist
Add to Wishlist
- Operating Voltage: 3.3V
- Current Consumption: 140uA (sleep mode)/ 520uA (Accelerometer mode only)/ 4.27mA (Gyro mode only)/ 4.9mA (accelerometer and gyro mode)
- Initial Sensitivity: accelerometer ±1%; gyro ±1%
- Non-linear Sensitivity: accelerometer ±0.5%, gyro ±0.1%
- Interface: I2C/SPI(7MHz)
- Selectable Scale: ±2g/±4g/±8g/±16g
- Gyroscope Range: ±125/±250/±500dps
Add to Wishlist
Add to Wishlist
- MCU: 100MHz STM32F411CEU6
- IMU: MPU6000 (SPI)
- Continuous current: 3.5 Amps
- Input voltage range: 6~30V
- Compatible lipo: (2~6S LiPo)
Add to Wishlist
Add to Wishlist
- MCU: STM32F405RGT6 32-bit processor
- IMU: ICM20689 (SPI)
- USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
- 3 hardware UARTS (UART1,3,6)
- 128 Mbit Dataflash chip for Blackbox logging
- 5v Power Out: 1.5 A max
- 3.3v Power Out: 200 mA max
Add to Wishlist
Add to Wishlist
- 1.62V to 3.6V supply voltage,
- Supply Voltage −0.3 to 3.6 V
- Mechanical Shock 10,000 g
- User selectable data output rate
- I2C Interface
- One interrupt pin
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000