- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- User name and model setup can be saved (up to 15 aircraft)
- RSSI and Telemetry
- Adjustable display brightness and contrast
- Multiple alarms
- Servo reversing and end-point adjustment
- Adjustable servo travel limit (prevents pushrod jamming)
Add to Wishlist
Add to Wishlist
- Operating Voltage (VDC):7.4-12 V
- No of channels:12
- User name and model setup can be saved (up to 15 aircraft)
- RSSI and Telemetry
- Adjustable display brightness and contrast
- Multiple alarms
Add to Wishlist
Add to Wishlist
- Model: R9 STAB OTA
- Numbers of Channel: 8/16CH (CH16 outputs RSSI)
- Operating Voltage: DC 3.5V~10V
- Operating Current: 140mA@7.4V
- Measuring range of gyroscope: ±2000dps
- Measuring range of acceleration: ±4g
Add to Wishlist
Add to Wishlist
- Open-source operating system
- Default Operating Mode: Mode 2 (Left-Hand Throttle).
- This Remote comes with 2 x 18650 battery holder for power supply
- It is also compatible with a 2S battery with 3pin JST (XH) connector ( Battery Slot size is 92 x 57 x 18 mm (L x W x H)
- Installed with ACCESS protocol
- High-speed module digital interface
- Supports spectrum analyzer function
- Supports wired training function
- Haptic vibration alerts and voice speech outputs
Add to Wishlist
Add to Wishlist
- Model: Frsky R9 M Lite Pro Receiver
- Channel: 16CH
- Supports: Spectrum analyzer
- RF Operating Frequency: 868MHz / 915MHz
- RF Power (Non-LBT): 10mW / 100mW / 500mW / 100mW~1W
Add to Wishlist
Add to Wishlist
- Operating voltage: 12V
- Current requirement: 1A-2A
- Rated power: 6-7W
- HDMI input: version HDMI 1.1
- VGA input: 1280×800 physical resolution
- Brightness: 350 lumens
- Panel type: TFT
- Display Type: Capacitive Touch Display
- Number of wiring: 40 PIN LVDS
- Backlight: LED
Add to Wishlist
Add to Wishlist
- Compatibility: ACCST D16 and ACCESS receivers Communication Protocol:ACCST D16 /ACCESS Feel Free to Choose
- Classic Taranis form factor design Easy launch momentary button
- Program navigation button High-speed module digital interface
- Installed with ACCESS protocol Supports spectrum analyzer function
- Supports SWR indicator warning G9D potentiometer gimbal Supports wired training function
Add to Wishlist
Add to Wishlist
- LCD Type : TFT
- LCD Interface: SPI
- Touch Screen Type: Resistive
- Touch Screen Controller: XPT2046
- Colors: 65536
- Backlight: LED
Add to Wishlist
Add to Wishlist
- Power Requirements:D.C.+5V ( Maximum 100mA, typical 70mA, 50mV peak to peak maximum ripple)
- Interface:USB 1.1
- Operating Temperature:0 to 50 ℃
- Storage Temperature:-40 to 80 ℃
- Relative Humidity:95% at 60 ℃
- Supports operations systems including Windows 8, Windows 7, Windows 98, 2000, NT4, Me, XP, XP Tablet Edition, CE 2.12, CE 3.0, CE.net, Linux, DOS & iMac
Add to Wishlist
Add to Wishlist
- Input power: 4.0-6.5V DC
- Channels: 6 Channels
- Frequency range: 2.4~2.5 GHz
- Bandwidth: 500KHz
- RF receiver sensitivity: -105dbm
- Modulation: GFSK
Add to Wishlist
Add to Wishlist
- Lcd Type: TFT
- Lcd Interface: SPI
- Touch Screen Type: Resistive
- Touch Screen Controller: XPT2046
- Colors: 65536
- Backlight: LED
Add to Wishlist
Add to Wishlist
- Display Size:7 inches
- Resolution:800×480
- Display Port:DSI
- Touch Type:Capacitive
- Touch Points:5 Points
Add to Wishlist
Add to Wishlist
- Material: Aluminum alloy
- Applicable models: for Mavic Air/Mavic Mini/, Mavic 2 Pro Zoom.
- Colour: Black, Red
- Net weight: 3.6g (1 pair)
- Product size: 2*1cm (single)
Add to Wishlist
Add to Wishlist
- Channel: 4CH
- Weight: 2.2g
- Resolution: 1024
- PWM Output: Yes
- Operating Voltage: 3.5-10V
- Current: 50MA
- Antenna Length: 100mm
- Control Range: >500M+
- Compatibility: Compatible with Frsky X9D (D8 Mode), XJT (D8 Mode), DJT, DFT, DHT
Add to Wishlist
Add to Wishlist
- RX lead length:100mm
- Power in/out lead length:100mm (each)
- Switching load current (DC):5A (Continuous current)
- Input Voltage (DC):5-28V
Add to Wishlist
Add to Wishlist
- Power supply voltage: DC 7-24v
- Video format: automatic NTSC / PAL format
- Number of channels: 40ch
- Channel display: LED combination display
- Parameter setting mode: Press / OSD / betaflight
- Interface: 1.0-6p port
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000