- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Supports 3-6S Lipo input
- 35A continuous current, 50A burst
- MCU: STM32F745 32-bit processor
- IMU: ICM20689 (SPI)
- Barometer: BMP280
- Current Sensor: Approximately 130 amps maximum measurable value
- Supports Betaflight, Butterflight, and Cleanflight.
Add to Wishlist
Add to Wishlist
Voltage: 1~2s LiPoly (3.2~8.4V)
RF: Supports DSM/DSM2/DSMX
Software: Naze32 BRUSH
Size: 32.5 x 22 x 1.2mm
Weight: 3g
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
- Material: super soft silicone.
- Color Function JST-SH Pin Servo connector plug.
- Total Cable length: 15cm
Add to Wishlist
Add to Wishlist
- The volume of about 50 dB.
- Interface: 1.25-2P plug.
- Connector: DF13 Plug
- Wire length: 190mm
- Size: Dia 30mm
Add to Wishlist
Add to Wishlist
- 32bit STM32F427 Cortex M4 core with FPU
- 168MHz
- 256KB RAM
- 2 MB Flash
Add to Wishlist
Add to Wishlist
- MCU: 100MHz STM32F411CEU6
- IMU: MPU6000 (SPI)
- Continuous current: 3.5 Amps
- Input voltage range: 6~30V
- Compatible lipo: (2~6S LiPo)
Add to Wishlist
Add to Wishlist
- MCU: STM32F405RGT6 32-bit processor
- IMU: ICM20689 (SPI)
- USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
- 3 hardware UARTS (UART1,3,6)
- 128 Mbit Dataflash chip for Blackbox logging
- 5v Power Out: 1.5 A max
- 3.3v Power Out: 200 mA max
Add to Wishlist
Add to Wishlist
- Item name: F4 V3 PLUS Flight Controller
- Firmware: Omnibus ~ f4
- Board Dimensions: 36x36mm
- Montagegaten: 30.5×30.5mm
- STM32 F405 MCU
- Dshot protocol
Add to Wishlist
Add to Wishlist
- Brand: Orange
- Material: Glass Fiber Nylon
- Color: Grey
- No. of Blades: 2
- The Orange HD Propellers 1245(12X4.5) Glass Fiber Nylon Gray comes with Epoxy resin cover.
- Very strong and lightweight.
Add to Wishlist
Add to Wishlist
- Brand (trade name): JHEMCU
- Model: F4 NOXE V3
- Main control (MCU): STM32F411CEU6/100 MHz
- Sensor: BMI 270/Gyro/Accel
- Video Overlay (OSD): AT7456E
Add to Wishlist
Add to Wishlist
- product: folding propeller
- Material: Polymer
- Model: MF1604
- Max thrust: 4Kg
Add to Wishlist
Add to Wishlist
- Brand (trade name): JHEMCU
- Model: F4 NOXE V3
- Main control (MCU): STM32F411CEU6/100 MHz
- Sensor: BMI 270/Gyro/Accel
- Video Overlay (OSD): AT7456E
Add to Wishlist
Add to Wishlist
- Product: Flight Controller
- SPI Gyro IC268G
- On-Board OSD (controllered by Betaflight, FC over SPI bus)
- MicroSD Blackbox
- Baro (BMP280)( default is closed,need to open in configuration,if not know how to open,contact with us)
Add to Wishlist
Add to Wishlist
- Product: Flight Controller Autopilot
- Model: HX4-06159
- Input voltage: 3.3 V / 5 V
- Sensors: Accelerometer, Gyroscope, Compass, Barometric Pressure Sensor
- Cube Orange targets education, amateur drones lovers, and professionals with cost-effective flight control hardware
Add to Wishlist
Add to Wishlist
1. Compatible with various disk-type multi-copter motors
2. Gives a 10% efficiency boost.
3. Has higher strength than original DJI’s.
4. More convenient to install and disassemble than that of DJI’s.
5. Convenient to transport so as to protect the propellers.
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000