- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Lastest ESP32 Version: REV1
- Connectivity: WIFI & Bluetooth
- Memory: 4MB Flash4MB PSRAM
- Lithium battery interface, 500mA Max charging current
- Onboard TF CARD Slot
- Default firmware: Latest Micropython firmware
Add to Wishlist
Add to Wishlist
- ESP32 VCC range:2.2-3.6 V
- VBAT: direct to battery
- VCC: output of regulator 3.3V/600mA up to 250 mA during RF transmissions
- WiFi And Bluetooth Module
Add to Wishlist
Add to Wishlist
- Supports 3-6S Lipo input
- 35A continuous current, 50A burst
- MCU: STM32F745 32-bit processor
- IMU: ICM20689 (SPI)
- Barometer: BMP280
- Current Sensor: Approximately 130 amps maximum measurable value
- Supports Betaflight, Butterflight, and Cleanflight.
Add to Wishlist
Add to Wishlist
Voltage: 1~2s LiPoly (3.2~8.4V)
RF: Supports DSM/DSM2/DSMX
Software: Naze32 BRUSH
Size: 32.5 x 22 x 1.2mm
Weight: 3g
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
- LoRa Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change
- High sensitivity: down to -148dBm
- Half-duplex SPI communication
- Programmable bit rates up to 300kbps
- Supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes
Add to Wishlist
Add to Wishlist
- Working voltage: 4.5V to 5.5 V
- Transmit tube pressure drop: Vf = 1.6 V
- Transmit tube current: 20 mA
- Distinguish precision: 0.01 mm
- Measurement frequency, 100 kHz
Add to Wishlist
Add to Wishlist
- Compatible with 3.3v or 5v I/O Arduino Board.
- Frequency Band: 433 MHZ (Pre-configure in factory)
- Low power consumption
- Compatible with Arduino Leonardo, Uno, Mega2560, DUE
- External Antenna via SMA Jack
Add to Wishlist
Add to Wishlist
- 168 dB maximum link budget.
- +20 dBm – 100 mW constant RF output vs.
- +14 dBm high-efficiency PA.
- Programmable bit rate up to 300 kbps.
- High sensitivity: down to -148 dBm.
- Bullet-proof front end: IIP3 = -12.5 dBm.
- Excellent blocking immunity.
- Low RX current of 10.3 mA, 200 nA register retention.
- Fully integrated synthesizer with a resolution of 61 Hz.
- FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
- Built-in bit synchronizer for clock recovery.
- Preamble detection.
- 127 dB Dynamic Range RSSI.
Add to Wishlist
Add to Wishlist
- Material: super soft silicone.
- Color Function JST-SH Pin Servo connector plug.
- Total Cable length: 15cm
Add to Wishlist
Add to Wishlist
- The volume of about 50 dB.
- Interface: 1.25-2P plug.
- Connector: DF13 Plug
- Wire length: 190mm
- Size: Dia 30mm
Add to Wishlist
Add to Wishlist
- 32bit STM32F427 Cortex M4 core with FPU
- 168MHz
- 256KB RAM
- 2 MB Flash
Add to Wishlist
Add to Wishlist
- Supply voltage 3.7V – 5V
- Mini and compact size
- Output power +20.8 dBm at 3.3V
- Sensitivity-116.5 dBm ~ -136 dBm
- ModulationLoRa, (G)FSK, (G)MSK, BPSK
Add to Wishlist
Add to Wishlist
- MCU: 100MHz STM32F411CEU6
- IMU: MPU6000 (SPI)
- Continuous current: 3.5 Amps
- Input voltage range: 6~30V
- Compatible lipo: (2~6S LiPo)
Add to Wishlist
Add to Wishlist
- Communication distance: 15KM
- Sensitivity: down to -148dBm
- Programmable bit rates: up to 300kbps
- RSSI dynamic range: 127dB
- Wireless frequency: 433MHz
- Working voltage: 1.8-3.7v
- Working temperature: -40-+80 ℃
Add to Wishlist
Add to Wishlist
- Model No.:E32-900T30D
- Port Number:1
- Interface Type: CDMA
- Working Frequency Range:862 to 915 MHz
- Operating Distance Range (Meter):8000
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000