- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Frequency (MHz): 1575 +/- 20
- Gain: > 2.5dBi
- Impedance (Ω): 50
- Connector Type: IPEX MHF1 Female
- Cable Length: 100 mm
- VSWR : <2.0
Add to Wishlist
Add to Wishlist
- Height: 5mm
- Weight: 2.4g/5g (including cable)
- Hole diameter: 3mm
- Dimensions: 20mm X 30mm
Add to Wishlist
Add to Wishlist
- Locate performance
- These are Pre-configured, Flashed with the correct settings, and tested. To make them Plug and Play.
- Permanent Configuration Retention
Add to Wishlist
Add to Wishlist
- Power supply: voltage 5VDC+-5%, current 50~55mA
- Positional Accuracy: 50-centimeter precision when working with concurrent GNSS.
- Velocity precision: 0.1m/s
- Max update rate: up to 10Hz
- Max height: 50000m
- Max speed: 515m/s
- Max acceleration: 4G
Add to Wishlist
Add to Wishlist
- Velocity Precision: 0.1m/s
- Max Height: 50000m
- Max Speed: 515m/s
- Max Acceleration: 4G
- Update Rate: 10Hz
Add to Wishlist
Add to Wishlist
- Input Voltage: 3.3V~5.5V
- Operating Current: 5mA (25mA in VOC Measurement)
- Communication Interface: I2C(Support 3.3V/5V) or SPI(other non-I2C ports only support 3.3V)
- Default I2C Address: 0x76
- Temperature Measurement Range: -40℃~+85℃
- Temperature Measurement Precision: ±1.0℃(0~65℃)
- Humidity Measurement Range: 0-100%r.H.
- Humidity Measurement Precision: ±3%r.H.(20-80% r.H.,25℃)
Add to Wishlist
Add to Wishlist
- Product: ceramic antenna cable
- Frequency: 1575.42MHz ± 4 MHz
- Antenna gain: 28dB
- Operating temperature: -45 ~ +85
- Polarization: right-hand circular polarization
- Interference suppression: 30dB ± 100MHz
- Weight: 15g
Add to Wishlist
Add to Wishlist
- Working Voltage: 3.3V DC.
- Working Current: 35mA.
- Output Signal: I2C, UART.
- Working Temperature: -20~70℃.
- Size: 30mm x 20.5mm/1.18 x 0.81″
Add to Wishlist
Add to Wishlist
- 40PIN GPIO, Compatible with all the Raspberry Pi Boards.
- Onboard TSL25911FN digital ambient light sensor, for measuring IR and visible light
- Onboard BME280 sensor, for measuring temperature, humidity, and air pressure
- Onboard ICM20948 motion sensor, accelerometer, gyroscope, and magnetometer
- Onboard LTR390-UV-1 sensor, for measuring UV rays
- Onboard SGP40 sensor, for detecting ambient VOC
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Communication interface: I2C/SPI
- Dimension: 27mm x 20mm
- Mounting hole size: 2.0mm
Add to Wishlist
Add to Wishlist
- Gravity interface, no need to solder, plug and play
- Switchable I2C and UART, two output modes
- Highly integrated module can test a variety of data at the same time
- Reasonable layout and high precision
Add to Wishlist
Add to Wishlist
- Brand Name: FlySky
- Item Name: FS-CGPS01 GPS
- Model: FS-CGPS01
- Master Chip: NEO-MBQ
- Channels: 72
Add to Wishlist
Add to Wishlist
- PM, NOx, VOC, RH & T Sensor Platform
- Fast and Easy integration
- One Driver for up to 8 data signal
- Superior Sensing accuracy and lifetime
- Fully calibrated digital output
Add to Wishlist
Add to Wishlist
- Operation Voltage: 3.0V – 5.5V ( Typical 5V)
- Channels : 72 Searching Channel
- Support Rate : 4800bps to 921600bps,Default 9600bps
- Data Level : TTL or RS-232,Default TTL leve
Add to Wishlist
Add to Wishlist
- Model:BN-880
- Power Supply: DC Voltage 2.8V~6.0V,Typical:3.3V or 5.0V
- Consumption: Capture 50mA@5V
- Receiving Format: GPS,GLONASS,Galileo,BeiDou,QZSS and SBAS
- Receiving Channel: 72 Searching Channel
Add to Wishlist
Add to Wishlist
- Rated input voltage AC: 220~240V
- Input rated current <5mA
- Input voltage frequency 50/60Hz
- Ozone concentration <0.1mg/h
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000