- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Frequency (MHz): 1575 +/- 20
- Gain: > 2.5dBi
- Impedance (Ω): 50
- Connector Type: IPEX MHF1 Female
- Cable Length: 100 mm
- VSWR : <2.0
Add to Wishlist
Add to Wishlist
- Height: 5mm
- Weight: 2.4g/5g (including cable)
- Hole diameter: 3mm
- Dimensions: 20mm X 30mm
Add to Wishlist
Add to Wishlist
- Processor: ARM Cortex-M4 CPU 5.0 Stack
- Input Voltage:3.3V@500mA
- Connector Type:2 pole JST-Ph
- Interface: I2C
- Weight:3 gm
Add to Wishlist
Add to Wishlist
- Non-contact measurement, high safety
- Multiple ranges for various measurement scenarios
- Compatible with 3V3/5V micro-controller
Add to Wishlist
Add to Wishlist
- ATmega328@16MHz
- Bluetooth Low Energy (BT 4.0)
- Micro USB port
- Super Compact Size
- Support Bluetooth HID and ibeacon
Add to Wishlist
Add to Wishlist
- 2.4 GHz Transmit and Receive.
- Transmit power and receive sensitivity comparable to a Class 1 Bluetooth device.
- Standard Cortex Debug Connector (10-pin 50-mil JTAG)
- In-System Programming (ISP) Serial Connector
- Expansion connector intended for inter-Ubertooth communication or other future uses.
- Six Indicator LEDs
Add to Wishlist
Add to Wishlist
- Locate performance
- These are Pre-configured, Flashed with the correct settings, and tested. To make them Plug and Play.
- Permanent Configuration Retention
Add to Wishlist
Add to Wishlist
- power supply: DC 7-30 V
- Input Voltage: 0-10V
- Output current: 4-20mA
Add to Wishlist
Add to Wishlist
BLE chip: TICC2540
Working channel: 2.4G
Interface: Micro-USB
Input voltage: Micro-USB power supply, Vin6~12V, 5V
Microprocessor: ATmega328P-MU QFN32
Bootloader: Latest arduino1.8.8
Pin: two rows 2.54mm-15Pin
Add to Wishlist
Add to Wishlist
- Microcontroller: ATmega328P
- Nrf24L01+ 2.4G wireless
- Architecture AVR
- Operating Voltage 5 V
- Flash Memory 32 KB of which 2 KB used by bootloader
- SRAM: 2 KB
- Clock Speed: 16 MHz
- Analog I/O: 8 Pins
- EEPROM 1 KB
- DC Current per I/O Pins: 40 mA (I/O Pins)
- Input Voltage: 7-12 V
- Digital I/O: 22 Pins
- PWM Output: 6
- Power Consumption: 19 m
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
- Power supply: voltage 5VDC+-5%, current 50~55mA
- Positional Accuracy: 50-centimeter precision when working with concurrent GNSS.
- Velocity precision: 0.1m/s
- Max update rate: up to 10Hz
- Max height: 50000m
- Max speed: 515m/s
- Max acceleration: 4G
Add to Wishlist
Add to Wishlist
- Velocity Precision: 0.1m/s
- Max Height: 50000m
- Max Speed: 515m/s
- Max Acceleration: 4G
- Update Rate: 10Hz
Add to Wishlist
Add to Wishlist
- BT Version Bluetooth Specification V4.0 BLE
- Supply Power 3.3v – 5v
- Working frequency 2.4GHz ISM band
- Modulation method GFSK(Gaussian Frequency Shift Keying)
- Speed Asynchronous: 6K Bytes, Synchronous: 6K Bytes
- Size 40cm x 20cm
Add to Wishlist
Add to Wishlist
- Working Frequency: 2.4G
- Communication Interface: UA pin 3.3V TTL level
- Input Voltage: 3.2 ~ 6V
- Operating Voltage: 3.0 ~ 3.6V
- Communication Level: 3.3V
- Transmitted Power: 6dBm (max)
- Reference Distance: 10m
- Air Data Rate: 2Mbps
Add to Wishlist
Add to Wishlist
- Supply voltage: 3.2 – 6V DC
- Signal voltage: 3.2 – 6V DC
- Range: ~10m (in open air)
- LED indication present (indicates status of Bluetooth connection)
- Interface: UART (RX and TX)
- Baud rate in standard modes: 9600 (adjustable)
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000