- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
25 AWG Single Strand Wire (5 Meters, 4 Colors)
In Stock
Add to Wishlist
Add to Wishlist
25 AWG (1/.45MM) Single Strand Wire (10 Meter, Single Color)
In Stock
Add to Wishlist
Add to Wishlist
Tinned Copper Fuse Wire 22 SWG
In Stock
Add to Wishlist
Add to Wishlist
Tinned Copper Fuse Wire 28 SWG
In Stock
Add to Wishlist
Add to Wishlist
30 AWG Twisted Hookup Wire (7/0.09mm) 90 meter
In Stock
Add to Wishlist
Add to Wishlist
- Weight: 56g
- Dimension: 40×19.7×41mm
- Gear Type: Metal gear
- Dead band width: 1us
- Wire length: 32cm
Add to Wishlist
Add to Wishlist
- Non-contact measurement, high safety
- Multiple ranges for various measurement scenarios
- Compatible with 3V3/5V micro-controller
Add to Wishlist
Add to Wishlist
- power supply: DC 7-30 V
- Input Voltage: 0-10V
- Output current: 4-20mA
Add to Wishlist
Add to Wishlist
- input current (RMS): 5A.
- Max current: 15A.
- Work temperature:-25℃~+70℃.
- Storage temperature:-30℃~+90℃.
- Work voltage:660V.
- Frequency range:50Hz-1KHz.
- Dielectric strength:3.5KV 50Hz 1min
Add to Wishlist
Add to Wishlist
- Closed-loop current transducer using the Hall effect technology
- Primary nominal current of 25A
- 0.5% accuracy
- The primary current measuring range is ±36A
- The supply voltage is ±15V
- The conversion ratio is 1-2-3-4-5: 1000
- Secondary nominal RMS current is 25mA
Add to Wishlist
Add to Wishlist
- Conductivity range: 100 µS/cm to 200 mS/cm
- Cell constant4): typical 0.86 cm-1
- Nominal resistance: 1000 Ω at 0 °C
- Measurement frequency range: 100 Hz to 10 kHz
Add to Wishlist
Add to Wishlist
- Operating voltage: 4.8-8.4V
- Mechanical limited angle: No Limit
- POS sensor resolution: 180° / 1024
- Idling speed: 0.18sec / 60°@4.8V 0.16sec / 60°@6V
- Baudrate: 38400bps ~ 1Mbps
Add to Wishlist
Add to Wishlist
- Operating Voltage: 4.8v-6.6v
- Stall Torque (4.8v): 18.0kg.cm
- Stall Torque (6.6v): 20.0kg.cm
- Servo arms & screws included and fit with Futaba servo arm
- CE & RoHS approved
- Servo case: Alloy case in the middle
- Gear Type: Metal gear
- Bearing: Double ball bearing
Add to Wishlist
Add to Wishlist
- Input Current :100A
- Power supply: 15V DC
- Output Type: Voltage
- Output voltage: 4V
- Whole Diameter: 20mm
- Dimensions (L x W x H): 40 x 16 x 60
Add to Wishlist
Add to Wishlist
- Input: Bare conductor
- output 20A: 20mA
- Whole Diameter: 10
- Dimensions (L x W x H) mm: 23 x 25 x 40
Add to Wishlist
Add to Wishlist
- Model: MG90S
- Weight: 13 gm
- Operating voltage: 4.8V~ 6.6V
- Servo Plug: JR
- Stall torque @4.8V : 1.8kg-cm
- Stall torque @6.6V : 2.2kg-cm
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000