- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Non-contact measurement, high safety
- Multiple ranges for various measurement scenarios
- Compatible with 3V3/5V micro-controller
Add to Wishlist
Add to Wishlist
- power supply: DC 7-30 V
- Input Voltage: 0-10V
- Output current: 4-20mA
Add to Wishlist
Add to Wishlist
- Input Voltage: 3.3V~5.5V
- Operating Current: 5mA (25mA in VOC Measurement)
- Communication Interface: I2C(Support 3.3V/5V) or SPI(other non-I2C ports only support 3.3V)
- Default I2C Address: 0x76
- Temperature Measurement Range: -40℃~+85℃
- Temperature Measurement Precision: ±1.0℃(0~65℃)
- Humidity Measurement Range: 0-100%r.H.
- Humidity Measurement Precision: ±3%r.H.(20-80% r.H.,25℃)
Add to Wishlist
Add to Wishlist
- input current (RMS): 5A.
- Max current: 15A.
- Work temperature:-25℃~+70℃.
- Storage temperature:-30℃~+90℃.
- Work voltage:660V.
- Frequency range:50Hz-1KHz.
- Dielectric strength:3.5KV 50Hz 1min
Add to Wishlist
Add to Wishlist
- Closed-loop current transducer using the Hall effect technology
- Primary nominal current of 25A
- 0.5% accuracy
- The primary current measuring range is ±36A
- The supply voltage is ±15V
- The conversion ratio is 1-2-3-4-5: 1000
- Secondary nominal RMS current is 25mA
Add to Wishlist
Add to Wishlist
- Conductivity range: 100 µS/cm to 200 mS/cm
- Cell constant4): typical 0.86 cm-1
- Nominal resistance: 1000 Ω at 0 °C
- Measurement frequency range: 100 Hz to 10 kHz
Add to Wishlist
Add to Wishlist
- Working Voltage: 3.3V DC.
- Working Current: 35mA.
- Output Signal: I2C, UART.
- Working Temperature: -20~70℃.
- Size: 30mm x 20.5mm/1.18 x 0.81″
Add to Wishlist
Add to Wishlist
- 40PIN GPIO, Compatible with all the Raspberry Pi Boards.
- Onboard TSL25911FN digital ambient light sensor, for measuring IR and visible light
- Onboard BME280 sensor, for measuring temperature, humidity, and air pressure
- Onboard ICM20948 motion sensor, accelerometer, gyroscope, and magnetometer
- Onboard LTR390-UV-1 sensor, for measuring UV rays
- Onboard SGP40 sensor, for detecting ambient VOC
Add to Wishlist
Add to Wishlist
- Operating voltage: 3.3V/5V
- Communication interface: I2C/SPI
- Dimension: 27mm x 20mm
- Mounting hole size: 2.0mm
Add to Wishlist
Add to Wishlist
- Gravity interface, no need to solder, plug and play
- Switchable I2C and UART, two output modes
- Highly integrated module can test a variety of data at the same time
- Reasonable layout and high precision
Add to Wishlist
Add to Wishlist
- Input Current :100A
- Power supply: 15V DC
- Output Type: Voltage
- Output voltage: 4V
- Whole Diameter: 20mm
- Dimensions (L x W x H): 40 x 16 x 60
Add to Wishlist
Add to Wishlist
- Input: Bare conductor
- output 20A: 20mA
- Whole Diameter: 10
- Dimensions (L x W x H) mm: 23 x 25 x 40
Add to Wishlist
Add to Wishlist
- PM, NOx, VOC, RH & T Sensor Platform
- Fast and Easy integration
- One Driver for up to 8 data signal
- Superior Sensing accuracy and lifetime
- Fully calibrated digital output
Add to Wishlist
Add to Wishlist
- Rated input voltage AC: 220~240V
- Input rated current <5mA
- Input voltage frequency 50/60Hz
- Ozone concentration <0.1mg/h
Add to Wishlist
Add to Wishlist
- Working Voltage: 5.0V DC
- Working Current: 140mA@5V(Peak 264mA@5V)
- Data Update: cycle 2s
- Output Method: RS485/UART
Add to Wishlist
Add to Wishlist
- Model: YHDC SCT032R
- Flame resistance: UL94-V0
- Working temperature: -25~+70°C
- Storage temperature: -25~+70°C
- Current transformer rated: Input 200A, Output 50mA
- Dielectric strength: 2.5KV 50Hz 1min
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000