- 35% Off Industrial and Drone Parts.
- Free carbon neutral shipping on India orders ₹ 2000+.
End of Time:
:
:
:
0
0 items
₹0.00
No products in the cart.
- Operating voltage: 12V
- Current requirement: 1A-2A
- Rated power: 6-7W
- HDMI input: version HDMI 1.1
- VGA input: 1280×800 physical resolution
- Brightness: 350 lumens
- Panel type: TFT
- Display Type: Capacitive Touch Display
- Number of wiring: 40 PIN LVDS
- Backlight: LED
Add to Wishlist
Add to Wishlist
- LCD Type : TFT
- LCD Interface: SPI
- Touch Screen Type: Resistive
- Touch Screen Controller: XPT2046
- Colors: 65536
- Backlight: LED
Add to Wishlist
Add to Wishlist
- Power Requirements:D.C.+5V ( Maximum 100mA, typical 70mA, 50mV peak to peak maximum ripple)
- Interface:USB 1.1
- Operating Temperature:0 to 50 ℃
- Storage Temperature:-40 to 80 ℃
- Relative Humidity:95% at 60 ℃
- Supports operations systems including Windows 8, Windows 7, Windows 98, 2000, NT4, Me, XP, XP Tablet Edition, CE 2.12, CE 3.0, CE.net, Linux, DOS & iMac
Add to Wishlist
Add to Wishlist
- Lcd Type: TFT
- Lcd Interface: SPI
- Touch Screen Type: Resistive
- Touch Screen Controller: XPT2046
- Colors: 65536
- Backlight: LED
Add to Wishlist
Add to Wishlist
- Display Size:7 inches
- Resolution:800×480
- Display Port:DSI
- Touch Type:Capacitive
- Touch Points:5 Points
Add to Wishlist
Add to Wishlist
- Display Size:7 inches
- Resolution:1024×600,
- Display Port:DSI
- Touch Type:Capacitive
- Touch Points:5 Points
Add to Wishlist
Add to Wishlist
- 7inch IPS display with capacitive touch panel, hardware resolution is 1024 x 600
- Capacitive touch, supports up to 5-points touch
- Toughened glass capacitive touch panel, 6H hardness
- DSI interface, refresh rate up to 60Hz.
Add to Wishlist
Add to Wishlist
- Raspberry Pi Capacitive Touch Display
- Resolutions: 800×480
- Size: 5inch
- Display port: DSI
- Power Consumptions: Low power
- Touch Type: Capacitive
Add to Wishlist
Add to Wishlist
- Power input: 5V
- CM4 socket: suitable for all variants of Compute Module 4
- USB: USB 2.0 × 1
- Connector: MIPI CSI 22PIN 0.5mm camera connector
- Fully laminated touch screen. 2.8″ display with 5-point capacitive touch control, better touch experience from the fully laminated screen, together with 6H toughened glass panel, safer to use.
Add to Wishlist
Add to Wishlist
- Brand: HobbyFly
- Name: 1S Lipo Battery parallel Charging board
- Battery type: LiHv/Lipo/liion/life Battery
- Connector type: GNB27, JST-PH2.0mm, JST 1.25mm Output port
Add to Wishlist
Add to Wishlist
- Display: 2.8 inch IPS
- Resolution: 480×640
- Viewing Angle:160°
- Touch Port: I2C
- Refresh rate: 60Hz.
Add to Wishlist
Add to Wishlist
- Input power: 5V
- CM4 Socket: suitable for all variants of Compute Module 4
- Networking: Gigabit Ethernet RJ45 connector
- M.2 M Key: supports NVME SSD
Add to Wishlist
Add to Wishlist
- Charge Cell: 2~6S.
- Connector: (XT60-Male) with Xt60 Female
- Operating Voltage: 0~22.2VDC.
- Max current: 30A.
- Battery: 6 packs (same capacity & cell count).
- Thicken PCB copper foil, allow security using 40A charging current.
- Amass 7U gold plating plug plating.
- Use a safety fuse (50A) to protect the circuit.
Add to Wishlist
Add to Wishlist
- XT30 XT60 XT90 JST T Connector Lipo Parallel Charging Board.
- Supports 2-6S lithium battery charging and 2-6s extension parallel charging board
- Charge cable:14awg silicon cable which can stand with heavy current
- Multi-function charging board with XT30, XT60, XT90,T and JST plug in one board to meet almost kinds of batteries
- 4.0mm banana plug and XT60 plug,Compatible for Imax B6/B6AC ISDT HOTA etc chargers
Add to Wishlist
Add to Wishlist
Basic Components – Resistors | Capacitors | LEDs | Inductor | Varistor | Breadboard | Oscillator
Important links
Need Help?
+91 7231900002 (whatsapp)
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
- -5% for all order in this week Shop now
- Free delivery for all orders over ₹ 2000